kernel.git/drivers/pci/probe.c, branch linux-3.14.y

PCI: Disable all BAR sizing for devices with non-compliant BARs

2016-06-08T00:21:57Z

commit ad67b437f187ea818b2860524d10f878fadfdd99 upstream. b84106b4e229 ("PCI: Disable IO/MEM decoding for devices with non-compliant BARs") disabled BAR sizing for BARs 0-5 of devices that don't comply with the PCI spec. But it didn't do anything for expansion ROM BARs, so we still try to size them, resulting in warnings like this on Broadwell-EP: pci 0000:ff:12.0: BAR 6: failed to assign [mem size 0x00000001 pref] Move the non-compliant BAR check from __pci_read_base() up to pci_read_bases() so it applies to the expansion ROM BAR as well as to BARs 0-5. Note that direct callers of __pci_read_base(), like sriov_init(), will now bypass this check. We haven't had reports of devices with broken SR-IOV BARs yet. [bhelgaas: changelog] Fixes: b84106b4e229 ("PCI: Disable IO/MEM decoding for devices with non-compliant BARs") Signed-off-by: Prarit Bhargava Signed-off-by: Bjorn Helgaas CC: Thomas Gleixner CC: Ingo Molnar CC: "H. Peter Anvin" CC: Andi Kleen Signed-off-by: Greg Kroah-Hartman

PCI: Disable IO/MEM decoding for devices with non-compliant BARs

2016-04-12T16:12:39Z

commit b84106b4e2290c081cdab521fa832596cdfea246 upstream. The PCI config header (first 64 bytes of each device's config space) is defined by the PCI spec so generic software can identify the device and manage its usage of I/O, memory, and IRQ resources. Some non-spec-compliant devices put registers other than BARs where the BARs should be. When the PCI core sizes these "BARs", the reads and writes it does may have unwanted side effects, and the "BAR" may appear to describe non-sensical address space. Add a flag bit to mark non-compliant devices so we don't touch their BARs. Turn off IO/MEM decoding to prevent the devices from consuming address space, since we can't read the BARs to find out what that address space would be. Signed-off-by: Bjorn Helgaas Tested-by: Andi Kleen Signed-off-by: Greg Kroah-Hartman

PCI: Restore detection of read-only BARs

2015-01-16T14:59:30Z

commit 36e8164882ca6d3c41cb91e6f09a3ed236841f80 upstream. Commit 6ac665c63dca ("PCI: rewrite PCI BAR reading code") masked off low-order bits from 'l', but not from 'sz'. Both are passed to pci_size(), which compares 'base == maxbase' to check for read-only BARs. The masking of 'l' means that comparison will never be 'true', so the check for read-only BARs no longer works. Resolve this by also masking off the low-order bits of 'sz' before passing it into pci_size() as 'maxbase'. With this change, pci_size() will once again catch the problems that have been encountered to date: - AGP aperture BAR of AMD-7xx host bridges: if the AGP window is disabled, this BAR is read-only and read as 0x00000008 [1] - BARs 0-4 of ALi IDE controllers can be non-zero and read-only [1] - Intel Sandy Bridge - Thermal Management Controller [8086:0103]; BAR 0 returning 0xfed98004 [2] - Intel Xeon E5 v3/Core i7 Power Control Unit [8086:2fc0]; Bar 0 returning 0x00001a [3] Link: [1] https://git.kernel.org/cgit/linux/kernel/git/tglx/history.git/commit/drivers/pci/probe.c?id=1307ef6621991f1c4bc3cec1b5a4ebd6fd3d66b9 ("PCI: probing read-only BARs" (pre-git)) Link: [2] https://bugzilla.kernel.org/show_bug.cgi?id=43331 Link: [3] https://bugzilla.kernel.org/show_bug.cgi?id=85991 Reported-by: William Unruh Reported-by: Martin Lucina Signed-off-by: Myron Stowe Signed-off-by: Bjorn Helgaas CC: Matthew Wilcox Signed-off-by: Greg Kroah-Hartman

PCI: Support 64-bit bridge windows if we have 64-bit dma_addr_t

2014-12-06T23:55:34Z

commit 7fc986d8a9727e5d40da3c2c1c343da6142e82a9 upstream. Aaron reported that a 32-bit x86 kernel with Physical Address Extension (PAE) support complains about bridge prefetchable memory windows above 4GB: pci_bus 0000:00: root bus resource [mem 0x380000000000-0x383fffffffff] ... pci 0000:03:00.0: reg 0x10: [mem 0x383fffc00000-0x383fffdfffff 64bit pref] pci 0000:03:00.0: reg 0x20: [mem 0x383fffe04000-0x383fffe07fff 64bit pref] pci 0000:03:00.1: reg 0x10: [mem 0x383fffa00000-0x383fffbfffff 64bit pref] pci 0000:03:00.1: reg 0x20: [mem 0x383fffe00000-0x383fffe03fff 64bit pref] pci 0000:00:02.2: PCI bridge to [bus 03-04] pci 0000:00:02.2: bridge window [io 0x1000-0x1fff] pci 0000:00:02.2: bridge window [mem 0x91900000-0x91cfffff] pci 0000:00:02.2: can't handle 64-bit address space for bridge In this kernel, unsigned long is 32 bits and dma_addr_t is 64 bits. Previously we used "unsigned long" to hold the bridge window address. But this is a bus address, so we should use dma_addr_t instead. Use dma_addr_t to hold the bridge window base and limit. The question of whether the CPU can actually *address* the window is separate and depends on what the physical address space of the CPU is and whether the host bridge does any address translation. [bhelgaas: fix "shift count > width of type", changelog, stable tag] Fixes: d56dbf5bab8c ("PCI: Allocate 64-bit BARs above 4G when possible") Link: https://bugzilla.kernel.org/show_bug.cgi?id=88131 Reported-by: Aaron Ma Tested-by: Aaron Ma Signed-off-by: Yinghai Lu Signed-off-by: Bjorn Helgaas Signed-off-by: Greg Kroah-Hartman

Revert "PCI: Remove from bus_list and release resources in pci_release_dev()"

2014-02-01T18:24:31Z

Revert commit ef83b0781a73 "PCI: Remove from bus_list and release resources in pci_release_dev()" that made some nasty race conditions become possible. For example, if a Thunderbolt link is unplugged and then replugged immediately, the pci_release_dev() resulting from the hot-remove code path may be racing with the hot-add code path which after that commit causes various kinds of breakage to happen (up to and including a hard crash of the whole system). Moreover, the problem that commit ef83b0781a73 attempted to address cannot happen any more after commit 8a4c5c329de7 "PCI: Check parent kobject in pci_destroy_dev()", because pci_destroy_dev() will now return immediately if it has already been executed for the given device. Note, however, that the invocation of msi_remove_pci_irq_vectors() removed by commit ef83b0781a73 from pci_free_resources() along with the other changes made by it is not added back because of subsequent code changes depending on that modification. Fixes: ef83b0781a73 (PCI: Remove from bus_list and release resources in pci_release_dev()) Reported-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki Signed-off-by: Linus Torvalds

PCI: Add global pci_lock_rescan_remove()

2014-01-14T00:49:49Z

There are multiple PCI device addition and removal code paths that may be run concurrently with the generic PCI bus rescan and device removal that can be triggered via sysfs. If that happens, it may lead to multiple different, potentially dangerous race conditions. The most straightforward way to address those problems is to run the code in question under the same lock that is used by the generic rescan/remove code in pci-sysfs.c. To prepare for those changes, move the definition of the global PCI remove/rescan lock to probe.c and provide global wrappers, pci_lock_rescan_remove() and pci_unlock_rescan_remove(), allowing drivers to manipulate that lock. Also provide pci_stop_and_remove_bus_device_locked() for the callers of pci_stop_and_remove_bus_device() who only need to hold the rescan/remove lock around it. Signed-off-by: Rafael J. Wysocki Signed-off-by: Bjorn Helgaas

Merge branch 'pci/dead-code' into next

2014-01-13T23:47:08Z

* pci/dead-code: PCI: Make local functions static PCI: Remove unused alloc_pci_dev() PCI: Remove unused pci_renumber_slot() PCI: Remove unused pcie_aspm_enabled() PCI: Remove unused pci_vpd_truncate() PCI: Remove unused ID-Based Ordering support PCI: Remove unused Optimized Buffer Flush/Fill support PCI: Remove unused Latency Tolerance Reporting support PCI: Removed unused parts of Page Request Interface support Conflicts: drivers/pci/pci.c include/linux/pci.h

PCI: Make local functions static

2014-01-13T18:57:29Z

Using 'make namespacecheck' identify code which should be declared static. Checked for users in other driver/archs as well. Compile tested only. This stops exporting the following interfaces to modules: pci_target_state() pci_load_saved_state() [bhelgaas: retained pci_find_next_ext_capability() and pci_cfg_space_size()] Signed-off-by: Stephen Hemminger Signed-off-by: Bjorn Helgaas

PCI: Remove unused alloc_pci_dev()

2014-01-13T18:57:29Z

My philosophy is unused code is dead code. And dead code is subject to bit rot and is a likely source of bugs. Use it or lose it. This removes this unused and deprecated interface: alloc_pci_dev() [bhelgaas: split to separate patch] Signed-off-by: Stephen Hemminger Signed-off-by: Bjorn Helgaas

Merge branch 'pci/resource' into next

2014-01-10T21:23:15Z

* pci/resource: PCI: Allocate 64-bit BARs above 4G when possible PCI: Enforce bus address limits in resource allocation PCI: Split out bridge window override of minimum allocation address agp/ati: Use PCI_COMMAND instead of hard-coded 4 agp/intel: Use CPU physical address, not bus address, for ioremap() agp/intel: Use pci_bus_address() to get GTTADR bus address agp/intel: Use pci_bus_address() to get MMADR bus address agp/intel: Support 64-bit GMADR agp/intel: Rename gtt_bus_addr to gtt_phys_addr drm/i915: Rename gtt_bus_addr to gtt_phys_addr agp: Use pci_resource_start() to get CPU physical address for BAR agp: Support 64-bit APBASE PCI: Add pci_bus_address() to get bus address of a BAR PCI: Convert pcibios_resource_to_bus() to take a pci_bus, not a pci_dev PCI: Change pci_bus_region addresses to dma_addr_t