kernel.git/drivers/pci/pcie, branch linux-3.1.y

Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6

2011-07-30T06:35:05Z

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: remove printks about disabled bridge windows PCI: fold pci_calc_resource_flags() into decode_bar() PCI: treat mem BAR type "11" (reserved) as 32-bit, not 64-bit, BAR PCI: correct pcie_set_readrq write size PCI: pciehp: change wait time for valid configuration access x86/PCI: Preserve existing pci=bfsort whitelist for Dell systems PCI: ARI is a PCIe v2 feature x86/PCI: quirks: Use pci_dev->revision PCI: Make the struct pci_dev * argument of pci_fixup_irqs const. PCI hotplug: cpqphp: use pci_dev->vendor PCI hotplug: cpqphp: use pci_dev->subsystem_{vendor|device} x86/PCI: config space accessor functions should not ignore the segment argument PCI: Assign values to 'pci_obff_signal_type' enumeration constants x86/PCI: reduce severity of host bridge window conflict warnings PCI: enumerate the PCI device only removed out PCI hieratchy of OS when re-scanning PCI PCI: PCIe AER: add aer_recover_queue x86/PCI: select direct access mode for mmconfig option PCI hotplug: Rename is_ejectable which also exists in dock.c

PCI: PCIe AER: add aer_recover_queue

2011-07-22T15:25:37Z

In addition to native PCIe AER, now APEI (ACPI Platform Error Interface) GHES (Generic Hardware Error Source) can be used to report PCIe AER errors too. To add support to APEI GHES PCIe AER recovery, aer_recover_queue is added to export the recovery function in native PCIe AER driver. Recoverable PCIe AER errors are reported via NMI in APEI GHES. Then APEI GHES uses irq_work to delay the error processing into an IRQ handler. But PCIe AER recovery can be very time-consuming, so aer_recover_queue, which can be used in IRQ handler, delays the real recovery action into the process context, that is, work queue. Signed-off-by: Huang Ying Signed-off-by: Jesse Barnes

PCIe ASPM: forcedly -> forcibly

2011-06-29T12:24:14Z

Merriam-Webster tells us that the word exists. However ... * Google suggests `forcibly' because it doesn't recognize `forcedly'. * Google lists 494 thousand results for `forcedly'. * Google lists 13.7 million results for `forcibly'. * Linus's repo contains 1 occurrence of `forcedly' ( 0 after my change). * Linus's repo contains 60 occurrences of `forcibly' (61 after my change). Signed-off-by: Michael Witten Signed-off-by: Jiri Kosina

PCI: remove unused AER functions

2011-05-21T19:17:14Z

In the commit 28eb5f2, aer_osc_setup is removed but corresponding definiton information in the aerdrv.h is missed. Acked-by: Rafael J. Wysocki Signed-off-by: Chen Gong Signed-off-by: Jesse Barnes

PCI/e1000e: Add and use pci_disable_link_state_locked()

2011-05-21T19:16:44Z

Need to use it in _e1000e_disable_aspm. This routine is used for error recovery, where the pci_bus_sem is already held, and we don't want pci_disable_link_state to try to take it again. So add a locked variant for use in cases like this. Found lock up: [ 2374.654557] kworker/32:1 D ffff881027f6b0f0 0 6075 2 0x00000000 [ 2374.654816] ffff88503f099a68 0000000000000046 ffff88503f098000 0000000000004000 [ 2374.654837] 00000000001d1ec0 ffff88503f099fd8 00000000001d1ec0 ffff88503f099fd8 [ 2374.654860] 0000000000004000 00000000001d1ec0 ffff88503dcc8000 ffff88503f090000 [ 2374.654880] Call Trace: [ 2374.654898] [] ? __lock_acquired+0x3a/0x224 [ 2374.654914] [] ? _raw_spin_unlock_irq+0x30/0x36 [ 2374.654925] [] ? trace_hardirqs_on_caller+0x1f/0x178 [ 2374.654936] [] rwsem_down_failed_common+0xd3/0x103 [ 2374.654945] [] ? __lock_contended+0x3a/0x2a2 [ 2374.654955] [] rwsem_down_read_failed+0x12/0x14 [ 2374.654967] [] call_rwsem_down_read_failed+0x14/0x30 [ 2374.654981] [] ? pci_disable_link_state+0x5f/0xf5 [ 2374.654990] [] ? down_read+0x7e/0x91 [ 2374.654999] [] ? pci_disable_link_state+0x5f/0xf5 [ 2374.655008] [] pci_disable_link_state+0x5f/0xf5 [ 2374.655024] [] e1000e_disable_aspm+0x55/0x5a [ 2374.655037] [] e1000_io_slot_reset+0x59/0xea [ 2374.655048] [] ? report_mmio_enabled+0x5d/0x5d [ 2374.655057] [] report_slot_reset+0x2e/0x5d [ 2374.655072] [] pci_walk_bus+0x8a/0xb7 [ 2374.655081] [] ? report_mmio_enabled+0x5d/0x5d [ 2374.655091] [] broadcast_error_message+0xa4/0xb2 [ 2374.655101] [] ? pci_bus_read_config_dword+0x72/0x80 [ 2374.655110] [] do_recovery+0x9e/0xf9 [ 2374.655120] [] handle_error_source+0x4c/0x51 [ 2374.655129] [] aer_isr_one_error+0x1e9/0x21a [ 2374.655138] [] aer_isr+0xc7/0xcc [ 2374.655147] [] ? aer_isr_one_error+0x21a/0x21a [ 2374.655159] [] process_one_work+0x237/0x3ec [ 2374.655168] [] ? process_one_work+0x1a8/0x3ec [ 2374.655178] [] worker_thread+0x17c/0x240 [ 2374.655186] [] ? trace_hardirqs_on+0xd/0xf [ 2374.655196] [] ? manage_workers+0xab/0xab [ 2374.655209] [] kthread+0xa0/0xa8 [ 2374.655223] [] kernel_thread_helper+0x4/0x10 [ 2374.655232] [] ? retint_restore_args+0xe/0xe [ 2374.655243] [] ? __init_kthread_worker+0x5b/0x5b [ 2374.655252] [] ? gs_change+0xb/0xb when aer happens, pci_walk_bus already have down_read(&pci_bus_sem)... then report_slot_reset ==> e1000_io_slot_reset ==> e1000e_disable_aspm ==> pci_disable_link_state... We can not use pci_disable_link_state, and it will try to hold pci_bus_sem again. Try to have __pci_disable_link_state that will not need to hold pci_bus_sem. -v2: change name to pci_disable_link_state_locked() according to Jesse. [jbarnes: make sure new function is exported for modules] Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes

PCI: Fix uninitialized variable bug in AER injection code

2011-05-10T22:43:30Z

If it was preempted, and the variable aer_mask_override is changed after the spin_unlock_irqrestore it will write an uninitialized variable by the pci_write_config_dword() function. Signed-off-by: Wanlong Gao Signed-off-by: Jesse Barnes

PCI: Enable ASPM state clearing regardless of policy

2011-05-10T22:43:28Z

Commit 2f671e2d allowed us to clear ASPM state when the FADT tells us it isn't supported, but we don't put this into effect if the aspm_policy is set to POLICY_POWERSAVE. Enable the state to be cleared regardless of policy. Signed-off-by: Alex Williamson Signed-off-by: Jesse Barnes

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6

2011-03-26T04:01:43Z

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: Disable ASPM when _OSC control is not granted for PCIe services PCI: Changing ASPM policy, via /sys, to POWERSAVE could cause NMIs PCI: PCIe links may not get configured for ASPM under POWERSAVE mode PCI/ACPI: Report ASPM support to BIOS if not disabled from command line

Merge branch 'linus' into release

2011-03-23T06:34:54Z

Conflicts: arch/x86/kernel/acpi/sleep.c Signed-off-by: Len Brown

ACPI, APEI, Add PCIe AER error information printing support

2011-03-22T02:59:08Z

The AER error information printing support is implemented in drivers/pci/pcie/aer/aer_print.c. So some string constants, functions and macros definitions can be re-used without being exported. The original PCIe AER error information printing function is not re-used directly because the overall format is quite different. And changing the original printing format may make some original users' scripts broken. Signed-off-by: Huang Ying CC: Jesse Barnes CC: Zhang Yanmin Signed-off-by: Len Brown