kernel.git/drivers/pci/pcie/err.c, branch linux-6.9.y

PCI/AER: Block runtime suspend when handling errors

2024-03-07T23:58:07Z

PM runtime can be done simultaneously with AER error handling. Avoid that by using pm_runtime_get_sync() before and pm_runtime_put() after reset in pcie_do_recovery() for all recovering devices. pm_runtime_get_sync() will increase dev->power.usage_count counter to prevent any possible future request to runtime suspend a device. It will also resume a device, if it was previously in D3hot state. I tested with igc device by doing simultaneous aer_inject and rpm suspend/resume via /sys/bus/pci/devices/PCI_ID/power/control and can reproduce: igc 0000:02:00.0: not ready 65535ms after bus reset; giving up pcieport 0000:00:1c.2: AER: Root Port link has been reset (-25) pcieport 0000:00:1c.2: AER: subordinate device reset failed pcieport 0000:00:1c.2: AER: device recovery failed igc 0000:02:00.0: Unable to change power state from D3hot to D0, device inaccessible The problem disappears when this patch is applied. Link: https://lore.kernel.org/r/20240212120135.146068-1-stanislaw.gruszka@linux.intel.com Signed-off-by: Stanislaw Gruszka Signed-off-by: Bjorn Helgaas Reviewed-by: Kuppuswamy Sathyanarayanan Acked-by: Rafael J. Wysocki Cc:

PCI/ERR: Recognize disconnected devices in report_error_detected()

2022-06-08T20:08:40Z

When a device is already unplugged by pciehp by the time the AER handler is invoked, the PCIe device will already be in the pci_channel_io_perm_failure state. In that case simply return PCI_ERS_RESULT_DISCONNECT instead of trying to do a state transition that will fail. Also untangle the state transition failure from the lack of methods to improve the debugging output in case it happens again. Link: https://lore.kernel.org/r/20220601074024.3481035-1-hch@lst.de Signed-off-by: Christoph Hellwig Signed-off-by: Bjorn Helgaas Reviewed-by: Kuppuswamy Sathyanarayanan

Revert "PCI: Use to_pci_driver() instead of pci_dev->driver"

2021-11-11T19:36:22Z

This reverts commit 2a4d9408c9e8b6f6fc150c66f3fef755c9e20d4a. Robert reported a NULL pointer dereference caused by the PCI core (local_pci_probe()) calling the i2c_designware_pci driver's .runtime_resume() method before the .probe() method. i2c_dw_pci_resume() depends on initialization done by i2c_dw_pci_probe(). Prior to 2a4d9408c9e8 ("PCI: Use to_pci_driver() instead of pci_dev->driver"), pci_pm_runtime_resume() avoided calling the .runtime_resume() method because pci_dev->driver had not been set yet. 2a4d9408c9e8 and b5f9c644eb1b ("PCI: Remove struct pci_dev->driver"), removed pci_dev->driver, replacing it by device->driver, which *has* been set by this time, so pci_pm_runtime_resume() called the .runtime_resume() method when it previously had not. Fixes: 2a4d9408c9e8 ("PCI: Use to_pci_driver() instead of pci_dev->driver") Link: https://lore.kernel.org/linux-i2c/CAP145pgdrdiMAT7=-iB1DMgA7t_bMqTcJL4N0=6u8kNY3EU0dw@mail.gmail.com/ Reported-by: Robert Święcki Tested-by: Robert Święcki Signed-off-by: Bjorn Helgaas

PCI: Use to_pci_driver() instead of pci_dev->driver

2021-10-18T14:20:15Z

Struct pci_driver contains a struct device_driver, so for PCI devices, it's easy to convert a device_driver * to a pci_driver * with to_pci_driver(). The device_driver * is in struct device, so we don't need to also keep track of the pci_driver * in struct pci_dev. Replace pci_dev->driver with to_pci_driver(). This is a step toward removing pci_dev->driver. [bhelgaas: split to separate patch] Link: https://lore.kernel.org/r/20211004125935.2300113-11-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König Signed-off-by: Bjorn Helgaas

PCI/ERR: Factor out common dev->driver expressions

2021-10-12T22:37:15Z

Save the struct pci_driver pointer from pdev->driver instead of repeating it several times. No functional change. Signed-off-by: Bjorn Helgaas

PCI/ERR: Retain status from error notification

2021-02-23T23:10:42Z

Overwriting the frozen detected status with the result of the link reset loses the NEED_RESET result that drivers are depending on for error handling to report the .slot_reset() callback. Retain this status so that subsequent error handling has the correct flow. Link: https://lore.kernel.org/r/20210104230300.1277180-4-kbusch@kernel.org Reported-by: Hinko Kocevar Tested-by: Hedi Berriche Signed-off-by: Keith Busch Signed-off-by: Bjorn Helgaas Acked-by: Sean V Kelley Acked-by: Hedi Berriche

PCI/ERR: Clear status of the reporting device

2021-02-23T23:10:10Z

Error handling operates on the first Downstream Port above the detected error, but the error may have been reported by a downstream device. Clear the AER status of the device that reported the error rather than the first Downstream Port. Link: https://lore.kernel.org/r/20210104230300.1277180-2-kbusch@kernel.org Tested-by: Hedi Berriche Signed-off-by: Keith Busch Signed-off-by: Bjorn Helgaas Acked-by: Sean V Kelley Acked-by: Hedi Berriche

PCI/ERR: Recover from RCiEP AER errors

2020-12-05T21:26:02Z

Add support for handling AER errors detected by Root Complex Integrated Endpoints (RCiEPs). These errors are signaled to software natively via a Root Complex Event Collector (RCEC) or non-natively via ACPI APEI if the platform retains control of AER or uses a non-standard RCEC-like device. When recovering from RCiEP errors, the Root Error Command and Status registers are in the AER Capability of an associated RCEC (if any), not in a Root Port. In the non-native case, the platform is responsible for those registers and we can't touch them. [bhelgaas: commit log, etc] Co-developed-by: Sean V Kelley Link: https://lore.kernel.org/r/20201121001036.8560-13-sean.v.kelley@intel.com Signed-off-by: Sean V Kelley Signed-off-by: Qiuxu Zhuo Signed-off-by: Bjorn Helgaas

PCI/ERR: Recover from RCEC AER errors

2020-12-05T21:25:58Z

A Root Complex Event Collector (RCEC) collects and signals AER errors that were detected by Root Complex Integrated Endpoints (RCiEPs), but it may also signal errors it detects itself. This is analogous to errors detected and signaled by a Root Port. Update the AER service driver to claim RCECs in addition to Root Ports. Add support for handling RCEC-detected AER errors. This does not include handling RCiEP-detected errors that are signaled by the RCEC. Note that we expect these errors only from the native AER and APEI paths, not from DPC or EDR. [bhelgaas: split from combined RCEC/RCiEP patch, commit log] Signed-off-by: Sean V Kelley Signed-off-by: Bjorn Helgaas

PCI/ERR: Clear AER status only when we control AER

2020-12-04T17:18:58Z

In some cases a bridge may not exist as the hardware controlling may be handled only by firmware and so is not visible to the OS. This scenario is also possible in future use cases involving non-native use of RCECs by firmware. In this scenario, we expect the platform to retain control of the bridge and to clear error status itself. Clear error status only when the OS has native control of AER. Signed-off-by: Sean V Kelley Signed-off-by: Bjorn Helgaas