kernel.git/drivers/pci/msi, branch linux-6.15.y

PCI/MSI: Add an option to write MSIX ENTRY_DATA before any reads

2025-04-15T06:32:18Z

Commit 7d5ec3d36123 ("PCI/MSI: Mask all unused MSI-X entries") introduced a readl() from ENTRY_VECTOR_CTRL before the writel() to ENTRY_DATA. This is correct, however some hardware, like the Sun Neptune chips, the NIU module, will cause an error and/or fatal trap if any MSIX table entry is read before the corresponding ENTRY_DATA field is written to. Add an optional early writel() in msix_prepare_msi_desc(). Fixes: 7d5ec3d36123 ("PCI/MSI: Mask all unused MSI-X entries") Signed-off-by: Jonathan Currier Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20241117234843.19236-2-dullfire@yahoo.com

Merge tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2025-03-29T02:36:53Z

Pull pci updates from Bjorn Helgaas: "Enumeration: - Enable Configuration RRS SV, which makes device readiness visible, early instead of during child bus scanning (Bjorn Helgaas) - Log debug messages about reset methods being used (Bjorn Helgaas) - Avoid reset when it has been disabled via sysfs (Nishanth Aravamudan) - Add common pci-ep-bus.yaml schema for exporting several peripherals of a single PCI function via devicetree (Andrea della Porta) - Create DT nodes for PCI host bridges to enable loading device tree overlays to create platform devices for PCI devices that have several features that require multiple drivers (Herve Codina) Resource management: - Enlarge devres table[] to accommodate bridge windows, ROM, IOV BARs, etc., and validate BAR index in devres interfaces (Philipp Stanner) - Fix typo that repeatedly distributed resources to a bridge instead of iterating over subordinate bridges, which resulted in too little space to assign some BARs (Kai-Heng Feng) - Relax bridge window tail sizing for optional resources, e.g., IOV BARs, to avoid failures when removing and re-adding devices (Ilpo Järvinen) - Allow drivers to enable devices even if we haven't assigned optional IOV resources to them (Ilpo Järvinen) - Rework handling of optional resources (IOV BARs, ROMs) to reduce failures if we can't allocate them (Ilpo Järvinen) - Fix a NULL dereference in the SR-IOV VF creation error path (Shay Drory) - Fix s390 mmio_read/write syscalls, which didn't cause page faults in some cases, which broke vfio-pci lazy mapping on first access (Niklas Schnelle) - Add pdev->non_mappable_bars to replace CONFIG_VFIO_PCI_MMAP, which was disabled only for s390 (Niklas Schnelle) - Support mmap of PCI resources on s390 except for ISM devices (Niklas Schnelle) ASPM: - Delay pcie_link_state deallocation to avoid dangling pointers that cause invalid references during hot-unplug (Daniel Stodden) Power management: - Allow PCI bridges to go to D3Hot when suspending on all non-x86 systems (Manivannan Sadhasivam) Power control: - Create pwrctrl devices in pci_scan_device() to make it more symmetric with pci_pwrctrl_unregister() and make pwrctrl devices for PCI bridges possible (Manivannan Sadhasivam) - Unregister pwrctrl devices in pci_destroy_dev() so DOE, ASPM, etc. can still access devices after pci_stop_dev() (Manivannan Sadhasivam) - If there's a pwrctrl device for a PCI device, skip scanning it because the pwrctrl core will rescan the bus after the device is powered on (Manivannan Sadhasivam) - Add a pwrctrl driver for PCI slots based on voltage regulators described via devicetree (Manivannan Sadhasivam) Bandwidth control: - Add set_pcie_speed.sh to TEST_PROGS to fix issue when executing the set_pcie_cooling_state.sh test case (Yi Lai) - Avoid a NULL pointer dereference when we run out of bus numbers to assign for a bridge secondary bus (Lukas Wunner) Hotplug: - Drop superfluous pci_hotplug_slot_list, try_module_get() calls, and NULL pointer checks (Lukas Wunner) - Drop shpchp module init/exit logging, replace shpchp dbg() with ctrl_dbg(), and remove unused dbg(), err(), info(), warn() wrappers (Ilpo Järvinen) - Drop 'shpchp_debug' module parameter in favor of standard dynamic debugging (Ilpo Järvinen) - Drop unused cpcihp .get_power(), .set_power() function pointers (Guilherme Giacomo Simoes) - Disable hotplug interrupts in portdrv only when pciehp is not enabled to avoid issuing two hotplug commands too close together (Feng Tang) - Skip pciehp 'device replaced' check if the device has been removed to address a deadlock when resuming after a device was removed during system sleep (Lukas Wunner) - Don't enable pciehp hotplug interupt when resuming in poll mode (Ilpo Järvinen) Virtualization: - Fix bugs in 'pci=config_acs=' kernel command line parameter (Tushar Dave) DOE: - Expose supported DOE features via sysfs (Alistair Francis) - Allow DOE support to be enabled even if CXL isn't enabled (Alistair Francis) Endpoint framework: - Convert PCI device data so pci-epf-test works correctly on big-endian endpoint systems (Niklas Cassel) - Add BAR_RESIZABLE type to endpoint framework and add DWC core support for EPF drivers to set BAR_RESIZABLE type and size (Niklas Cassel) - Fix pci-epf-test double free that causes an oops if the host reboots and PERST# deassertion restarts endpoint BAR allocation (Christian Bruel) - Fix endpoint BAR testing so tests can skip disabled BARs instead of reporting them as failures (Niklas Cassel) - Widen endpoint test BAR size variable to accommodate BARs larger than INT_MAX (Niklas Cassel) - Remove unused tools 'pci' build target left over after moving tests to tools/testing/selftests/pci_endpoint (Jianfeng Liu) Altera PCIe controller driver: - Add DT binding and driver support for Agilex family (P-Tile, F-Tile, R-Tile) (Matthew Gerlach and D M, Sharath Kumar) AMD MDB PCIe controller driver: - Add DT binding and driver for AMD MDB (Multimedia DMA Bridge) (Thippeswamy Havalige) Broadcom STB PCIe controller driver: - Add BCM2712 MSI-X DT binding and interrupt controller drivers and add softdep on irq_bcm2712_mip driver to ensure that it is loaded first (Stanimir Varbanov) - Expand inbound window map to 64GB so it can accommodate BCM2712 (Stanimir Varbanov) - Add BCM2712 support and DT updates (Stanimir Varbanov) - Apply link speed restriction before bringing link up, not after (Jim Quinlan) - Update Max Link Speed in Link Capabilities via the internal writable register, not the read-only config register (Jim Quinlan) - Handle regulator_bulk_get() error to avoid panic when we call regulator_bulk_free() later (Jim Quinlan) - Disable regulators only when removing the bus immediately below a Root Port because we don't support regulators deeper in the hierarchy (Jim Quinlan) - Make const read-only arrays static (Colin Ian King) Cadence PCIe endpoint driver: - Correct MSG TLP generation so endpoints can generate INTx messages (Hans Zhang) Freescale i.MX6 PCIe controller driver: - Identify the second controller on i.MX8MQ based on devicetree 'linux,pci-domain' instead of DBI 'reg' address (Richard Zhu) - Remove imx_pcie_cpu_addr_fixup() since dwc core can now derive the ATU input address (using parent_bus_offset) from devicetree (Frank Li) Freescale Layerscape PCIe controller driver: - Drop deprecated 'num-ib-windows' and 'num-ob-windows' and unnecessary 'status' from example (Krzysztof Kozlowski) - Correct the syscon_regmap_lookup_by_phandle_args("fsl,pcie-scfg") arg_count to fix probe failure on LS1043A (Ioana Ciornei) HiSilicon STB PCIe controller driver: - Call phy_exit() to clean up if histb_pcie_probe() fails (Christophe JAILLET) Intel Gateway PCIe controller driver: - Remove intel_pcie_cpu_addr() since dwc core can now derive the ATU input address (using parent_bus_offset) from devicetree (Frank Li) Intel VMD host bridge driver: - Convert vmd_dev.cfg_lock from spinlock_t to raw_spinlock_t so pci_ops.read() will never sleep, even on PREEMPT_RT where spinlock_t becomes a sleepable lock, to avoid calling a sleeping function from invalid context (Ryo Takakura) MediaTek PCIe Gen3 controller driver: - Remove leftover mac_reset assert for Airoha EN7581 SoC (Lorenzo Bianconi) - Add EN7581 PBUS controller 'mediatek,pbus-csr' DT property and program host bridge memory aperture to this syscon node (Lorenzo Bianconi) Qualcomm PCIe controller driver: - Add qcom,pcie-ipq5332 binding (Varadarajan Narayanan) - Add qcom i.MX8QM and i.MX8QXP/DXP optional DMA interrupt (Alexander Stein) - Add optional dma-coherent DT property for Qualcomm SA8775P (Dmitry Baryshkov) - Make DT iommu property required for SA8775P and prohibited for SDX55 (Dmitry Baryshkov) - Add DT IOMMU and DMA-related properties for Qualcomm SM8450 (Dmitry Baryshkov) - Add endpoint DT properties for SAR2130P and enable endpoint mode in driver (Dmitry Baryshkov) - Describe endpoint BAR0 and BAR2 as 64-bit only and BAR1 and BAR3 as RESERVED (Manivannan Sadhasivam) Rockchip DesignWare PCIe controller driver: - Describe rk3568 and rk3588 BARs as Resizable, not Fixed (Niklas Cassel) Synopsys DesignWare PCIe controller driver: - Add debugfs-based Silicon Debug, Error Injection, Statistical Counter support for DWC (Shradha Todi) - Add debugfs property to expose LTSSM status of DWC PCIe link (Hans Zhang) - Add Rockchip support for DWC debugfs features (Niklas Cassel) - Add dw_pcie_parent_bus_offset() to look up the parent bus address of a specified 'reg' property and return the offset from the CPU physical address (Frank Li) - Use dw_pcie_parent_bus_offset() to derive CPU -> ATU addr offset via 'reg[config]' for host controllers and 'reg[addr_space]' for endpoint controllers (Frank Li) - Apply struct dw_pcie.parent_bus_offset in ATU users to remove use of .cpu_addr_fixup() when programming ATU (Frank Li) TI J721E PCIe driver: - Correct the 'link down' interrupt bit for J784S4 (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Describe AM65x BARs 2 and 5 as Resizable (not Fixed) and reduce alignment requirement from 1MB to 64KB (Niklas Cassel) Xilinx Versal CPM PCIe controller driver: - Free IRQ domain in probe error path to avoid leaking it (Thippeswamy Havalige) - Add DT .compatible "xlnx,versal-cpm5nc-host" and driver support for Versal Net CPM5NC Root Port controller (Thippeswamy Havalige) - Add driver support for CPM5_HOST1 (Thippeswamy Havalige) Miscellaneous: - Convert fsl,mpc83xx-pcie binding to YAML (J. Neuschäfer) - Use for_each_available_child_of_node_scoped() to simplify apple, kirin, mediatek, mt7621, tegra drivers (Zhang Zekun)" * tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (197 commits) PCI: layerscape: Fix arg_count to syscon_regmap_lookup_by_phandle_args() PCI: j721e: Fix the value of .linkdown_irq_regfield for J784S4 misc: pci_endpoint_test: Add support for PCITEST_IRQ_TYPE_AUTO PCI: endpoint: pci-epf-test: Expose supported IRQ types in CAPS register PCI: dw-rockchip: Endpoint mode cannot raise INTx interrupts PCI: endpoint: Add intx_capable to epc_features struct dt-bindings: PCI: Add common schema for devices accessible through PCI BARs PCI: intel-gw: Remove intel_pcie_cpu_addr() PCI: imx6: Remove imx_pcie_cpu_addr_fixup() PCI: dwc: Use parent_bus_offset to remove need for .cpu_addr_fixup() PCI: dwc: ep: Ensure proper iteration over outbound map windows PCI: dwc: ep: Use devicetree 'reg[addr_space]' to derive CPU -> ATU addr offset PCI: dwc: ep: Consolidate devicetree handling in dw_pcie_ep_get_resources() PCI: dwc: ep: Call epc_create() early in dw_pcie_ep_init() PCI: dwc: Use devicetree 'reg[config]' to derive CPU -> ATU addr offset PCI: dwc: Add dw_pcie_parent_bus_offset() checking and debug PCI: dwc: Add dw_pcie_parent_bus_offset() PCI/bwctrl: Fix NULL pointer dereference on bus number exhaustion PCI: xilinx-cpm: Add cpm_csr register mapping for CPM5_HOST1 variant PCI: brcmstb: Make const read-only arrays static ...

Revert "Merge tag 'irq-msi-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip"

2025-03-28T18:22:54Z

This reverts commit 36f5f026df6c1cd8a20373adc4388d2b3401ce91, reversing changes made to 43a7eec035a5b64546c8adefdc9cf96a116da14b. Thomas says: "I just noticed that for some incomprehensible reason, probably sheer incompetemce when trying to utilize b4, I managed to merge an outdated _and_ buggy version of that series. Can you please revert that merge completely?" Done. Requested-by: Thomas Gleixner Signed-off-by: Linus Torvalds

PCI/MSI: Handle the NOMASK flag correctly for all PCI/MSI backends

2025-03-26T14:28:43Z

The conversion of the XEN specific global variable pci_msi_ignore_mask to a MSI domain flag, missed the facts that: 1) Legacy architectures do not provide a interrupt domain 2) Parent MSI domains do not necessarily have a domain info attached Both cases result in an unconditional NULL pointer dereference. This was unfortunatly missed in review and testing revealed it late. Cure this by using the existing pci_msi_domain_supports() helper, which handles all possible cases correctly. Fixes: c3164d2e0d18 ("PCI/MSI: Convert pci_msi_ignore_mask to per MSI domain flag") Reported-by: Daniel Gomez Reported-by: Borislav Petkov Signed-off-by: Thomas Gleixner Reviewed-by: Juergen Gross Tested-by: Marek Szyprowski Tested-by: Borislav Petkov Tested-by: Daniel Gomez Link: https://lore.kernel.org/all/87iknwyp2o.ffs@tglx Closes: https://lore.kernel.org/all/qn7fzggcj6qe6r6gdbwcz23pzdz2jx64aldccmsuheabhmjgrt@tawf5nfwuvw7

Merge tag 'for-linus-6.15-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

2025-03-25T21:33:32Z

Pull xen updates from Juergen Gross: - cleanup: remove an used function - add support for a XenServer specific virtual PCI device - fix the handling of a sparse Xen hypervisor symbol table - avoid warnings when building the kernel with gcc 15 - fix use of devices behind a VMD bridge when running as a Xen PV dom0 * tag 'for-linus-6.15-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: PCI/MSI: Convert pci_msi_ignore_mask to per MSI domain flag PCI: vmd: Disable MSI remapping bypass under Xen xen/pci: Do not register devices with segments >= 0x10000 xen/pciback: Remove unused pcistub_get_pci_dev xenfs/xensyms: respect hypervisor's "next" indication xen/mcelog: Add __nonstring annotations for unterminated strings xen: Add support for XenServer 6.1 platform device

PCI/MSI: Convert pci_msi_ignore_mask to per MSI domain flag

2025-03-21T07:57:57Z

Setting pci_msi_ignore_mask inhibits the toggling of the mask bit for both MSI and MSI-X entries globally, regardless of the IRQ chip they are using. Only Xen sets the pci_msi_ignore_mask when routing physical interrupts over event channels, to prevent PCI code from attempting to toggle the maskbit, as it's Xen that controls the bit. However, the pci_msi_ignore_mask being global will affect devices that use MSI interrupts but are not routing those interrupts over event channels (not using the Xen pIRQ chip). One example is devices behind a VMD PCI bridge. In that scenario the VMD bridge configures MSI(-X) using the normal IRQ chip (the pIRQ one in the Xen case), and devices behind the bridge configure the MSI entries using indexes into the VMD bridge MSI table. The VMD bridge then demultiplexes such interrupts and delivers to the destination device(s). Having pci_msi_ignore_mask set in that scenario prevents (un)masking of MSI entries for devices behind the VMD bridge. Move the signaling of no entry masking into the MSI domain flags, as that allows setting it on a per-domain basis. Set it for the Xen MSI domain that uses the pIRQ chip, while leaving it unset for the rest of the cases. Remove pci_msi_ignore_mask at once, since it was only used by Xen code, and with Xen dropping usage the variable is unneeded. This fixes using devices behind a VMD bridge on Xen PV hardware domains. Albeit Devices behind a VMD bridge are not known to Xen, that doesn't mean Linux cannot use them. By inhibiting the usage of VMD_FEAT_CAN_BYPASS_MSI_REMAP and the removal of the pci_msi_ignore_mask bodge devices behind a VMD bridge do work fine when use from a Linux Xen hardware domain. That's the whole point of the series. Signed-off-by: Roger Pau Monné Reviewed-by: Thomas Gleixner Acked-by: Juergen Gross Acked-by: Bjorn Helgaas Message-ID: <20250219092059.90850-4-roger.pau@citrix.com> Signed-off-by: Juergen Gross

PCI/MSI: Provide a sane mechanism for TPH

2025-03-13T17:58:00Z

The PCI/TPH driver fiddles with the MSI-X control word of an active interrupt completely unserialized against concurrent operations issued from the interrupt core. It also brings the PCI/MSI-X internal cached control word out of sync. Provide a function, which has the required serialization and keeps the control word cache in sync. Unfortunately this requires to look up and lock the interrupt descriptor, which should be only done in the interrupt core code. But confining this particular oddity in the PCI/MSI core is the lesser of all evil. A interrupt core implementation would require a larger pile of infrastructure and indirections for dubious value. Signed-off-by: Thomas Gleixner Acked-by: Bjorn Helgaas Link: https://lore.kernel.org/all/20250313130321.822790423@linutronix.de

PCI/MSI: Switch to MSI descriptor locking to guard()

2025-03-13T17:58:00Z

Convert the code to use the new guard(msi_descs_lock). No functional change intended. Signed-off-by: Thomas Gleixner Reviewed-by: Jonathan Cameron Link: https://lore.kernel.org/all/20250313130321.695027112@linutronix.de

PCI: Fix typos

2025-03-08T21:08:45Z

Fix typos and whitespace errors. Link: https://lore.kernel.org/r/20250307231715.438518-1-helgaas@kernel.org Signed-off-by: Bjorn Helgaas

PCI/MSI: Handle lack of irqdomain gracefully

2024-12-16T09:59:47Z

Alexandre observed a warning emitted from pci_msi_setup_msi_irqs() on a RISCV platform which does not provide PCI/MSI support: WARNING: CPU: 1 PID: 1 at drivers/pci/msi/msi.h:121 pci_msi_setup_msi_irqs+0x2c/0x32 __pci_enable_msix_range+0x30c/0x596 pci_msi_setup_msi_irqs+0x2c/0x32 pci_alloc_irq_vectors_affinity+0xb8/0xe2 RISCV uses hierarchical interrupt domains and correctly does not implement the legacy fallback. The warning triggers from the legacy fallback stub. That warning is bogus as the PCI/MSI layer knows whether a PCI/MSI parent domain is associated with the device or not. There is a check for MSI-X, which has a legacy assumption. But that legacy fallback assumption is only valid when legacy support is enabled, but otherwise the check should simply return -ENOTSUPP. Loongarch tripped over the same problem and blindly enabled legacy support without implementing the legacy fallbacks. There are weak implementations which return an error, so the problem was papered over. Correct pci_msi_domain_supports() to evaluate the legacy mode and add the missing supported check into the MSI enable path to complete it. Fixes: d2a463b29741 ("PCI/MSI: Reject multi-MSI early") Reported-by: Alexandre Ghiti Signed-off-by: Thomas Gleixner Tested-by: Alexandre Ghiti Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/87ed2a8ow5.ffs@tglx