Hosts the 0x221E linux distro kernel. https://git.0xinfinity.dev/distro/kernel.git/atom?h=linux-3.17.y 2014-08-19T14:45:31Z 2014-08-19T14:45:31Z Linus Torvalds 2014-08-19T14:45:31Z urn:sha1:f17a6f78595e52761b7b2dece8c11b04b65f19dd Pull PCI changes from Bjorn Helgaas: "Marvell MVEBU - Remove ARCH_KIRKWOOD dependency (Andrew Lunn) NVIDIA Tegra - Add debugfs support (Thierry Reding) Synopsys DesignWare - Look for configuration space in 'reg', not 'ranges' (Kishon Vijay Abraham I) - Program ATU with untranslated address (Kishon Vijay Abraham I) - Add config access-related pcie_host_ops for v3.65 hardware (Murali Karicheri) - Add MSI-related pcie_host_ops for v3.65 hardware (Murali Karicheri) TI DRA7xx - Add TI DR7xx PCIe driver (Kishon Vijay Abraham I)" * tag 'pci-v3.17-changes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: designware: Add MSI-related pcie_host_ops for v3.65 hardware PCI: designware: Add config access-related pcie_host_ops for v3.65 hardware PCI: dra7xx: Add TI DRA7xx PCIe driver PCI: designware: Program ATU with untranslated address PCI: designware: Look for configuration space in 'reg', not 'ranges' PCI: tegra: Add debugfs support PCI: mvebu: Remove ARCH_KIRKWOOD dependency 2014-07-22T21:26:24Z Kishon Vijay Abraham I 2014-07-22T21:23:45Z urn:sha1:47ff3de911a728cdf9ecc6ad777131902cff62b4 Add support for PCIe controller in DRA7xx. This driver re-uses the designware core code that is already present in kernel. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Mohit Kumar <mohit.kumar@st.com> Cc: Marek Vasut <marex@denx.de> Cc: Arnd Bergmann <arnd@arndb.de> 2014-07-14T05:00:39Z Pratyush Anand 2014-02-11T06:09:26Z urn:sha1:51b66a6ce12570e5ee1a249c811f7f2d74814a43 ARM based ST Microelectronics's SPEAr1310 and SPEAr1340 SOCs have onchip designware PCIe controller. To make that usable, this patch adds a wrapper driver based on existing designware driver. Adds bindings for this new driver and update MAINTAINERS as well. Cc: linux-pci@vger.kernel.org Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Mohit Kumar <mohit.kumar@st.com> [viresh: fixed logs/cclist/checkpatch warnings, broken into smaller patches] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> 2014-05-30T17:40:13Z Bjorn Helgaas 2014-05-30T17:40:13Z urn:sha1:d785260e2f57d87de5c059de2dabc3cd31b745f0 * pci/host-generic: MAINTAINERS: Add generic PCI host controller driver PCI: generic: Add generic PCI host controller driver Conflicts: drivers/pci/host/Kconfig drivers/pci/host/Makefile 2014-05-30T17:34:49Z Will Deacon 2013-11-22T16:14:41Z urn:sha1:ce292991d88b77160f348fb8a3a2cf6e78f4b456 Add support for a generic PCI host controller, such as a firmware-initialised device with static windows or an emulation by something such as kvmtool. The controller itself has no configuration registers and has its address spaces described entirely by the device-tree (using the bindings from ePAPR). Both CAM and ECAM are supported for Config Space accesses. Add corresponding documentation for the DT binding. [bhelgaas: currently uses the ARM-specific pci_common_init_dev() interface] Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> 2014-05-28T02:37:37Z Phil Edworthy 2014-05-12T10:57:48Z urn:sha1:c25da4778803b41e11fd82dd5576c35c09b5f0e0 This PCIe Host driver currently does not support MSI, so cards fall back to INTx interrupts. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> 2013-10-31T19:58:49Z Bjorn Helgaas 2013-10-31T19:58:49Z urn:sha1:4efc52a9c22d4795e6960c1baf41e0f7e440682a * pci/host-rcar: PCI: Add R-Car Gen2 internal PCI support 2013-10-30T17:25:55Z Valentine Barshak 2013-10-29T16:12:51Z urn:sha1:ba3eb9fce31571257f90c5e610ad74d6dd59b1f2 This adds internal PCI controller driver for R-Car Gen2 SoC. There are three PCI controllers available with only a single EHCI/OHCI device built-in on each PCI bus. This gives us three USB channels. Channel 0 is shared with the USBHS device, while channel 2 is shared with the USBSS. The PCI controllers do not support I/O port space mapping, and it is not needed here. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> 2013-09-27T19:17:08Z Sean Cross 2013-09-26T03:24:47Z urn:sha1:bb38919ec56e0758c3ae56dfc091dcde1391353e Add support for the PCIe port present on the i.MX6 family of controllers. These use the Synopsis Designware core tied to their own PHY. Signed-off-by: Sean Cross <xobs@kosagi.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> 2013-09-06T20:30:06Z Linus Torvalds 2013-09-06T20:30:06Z urn:sha1:b4b50fd78b1e31989940dfc647e64453d0f7176a Pull ARM SoC platform changes from Olof Johansson: "This branch contains mostly additions and changes to platform enablement and SoC-level drivers. Since there's sometimes a dependency on device-tree changes, there's also a fair amount of those in this branch. Pieces worth mentioning are: - Mbus driver for Marvell platforms, allowing kernel configuration and resource allocation of on-chip peripherals. - Enablement of the mbus infrastructure from Marvell PCI-e drivers. - Preparation of MSI support for Marvell platforms. - Addition of new PCI-e host controller driver for Tegra platforms - Some churn caused by sharing of macro names between i.MX 6Q and 6DL platforms in the device tree sources and header files. - Various suspend/PM updates for Tegra, including LP1 support. - Versatile Express support for MCPM, part of big little support. - Allwinner platform support for A20 and A31 SoCs (dual and quad Cortex-A7) - OMAP2+ support for DRA7, a new Cortex-A15-based SoC. The code that touches other architectures are patches moving MSI arch-specific functions over to weak symbols and removal of ARCH_SUPPORTS_MSI, acked by PCI maintainers" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits) tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list ARM: dts: vf610-twr: enable i2c0 device ARM: dts: i.MX51: Add one more I2C2 pinmux entry ARM: dts: i.MX51: Move pins configuration under "iomuxc" label ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX ARM: dts: i.MX27: Disable AUDMUX in the template ARM: dts: wandboard: Add support for SDIO bcm4329 ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template ARM: dts: imx53-qsb: Make USBH1 functional ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module ARM: dts: imx6qdl-sabresd: Add touchscreen support ARM: imx: add ocram clock for imx53 ARM: dts: imx: ocram size is different between imx6q and imx6dl ARM: dts: imx27-phytec-phycore-som: Fix regulator settings ARM: dts: i.MX27: Remove clock name from CPU node ...