kernel.git/drivers/pci/dwc, branch linux-4.15.y

PCI: designware-ep: Fix ->get_msi() to check MSI_EN bit

2018-03-24T10:02:49Z

[ Upstream commit a134a457ed985dca8cce7ac4ea66129ea70eba73 ] ->get_msi() now checks MSI_EN bit in the MSI CAPABILITY register to find whether the host supports MSI instead of using the MSI ADDRESS in the MSI CAPABILITY register. This fixes the issue with the following sequence 'modprobe pci_endpoint_test' enables MSI 'rmmod pci_endpoint_test' disables MSI but MSI address (in EP's capability register) has a valid value 'modprobe pci_endpoint_test no_msi=1' - Since MSI address (in EP's capability register) has a valid value (set during the previous insertion of the module), EP thinks host supports MSI. Fixes: f8aed6ec624f ("PCI: dwc: designware: Add EP mode support") Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Lorenzo Pieralisi Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

PCI: dwc: Fix enumeration end when reaching root subordinate

2018-03-15T09:56:49Z

commit fc110ebdd014dd1368c98e7685b47789c31fab42 upstream. The subordinate value indicates the highest bus number which can be reached downstream though a certain device. Commit a20c7f36bd3d ("PCI: Do not allocate more buses than available in parent") ensures that downstream devices cannot assign busnumbers higher than the upstream device subordinate number, which was indeed illogical. By default, dw_pcie_setup_rc() inits the Root Complex subordinate to a value of 0x01. Due to this combined with above commit, enumeration stops digging deeper downstream as soon as bus num 0x01 has been assigned, which is always the case for a bridge device. This results in all devices behind a bridge bus remaining undetected, as these would be connected to bus 0x02 or higher. Fix this by initializing the RC to a subordinate value of 0xff, which is not altering hardware behaviour in any way, but informs probing function pci_scan_bridge() later on which reads this value back from register. The following nasty errors during boot are also fixed by this: pci_bus 0000:02: busn_res: can not insert [bus 02-ff] under [bus 01] (conflicts with (null) [bus 01]) ... pci_bus 0000:03: [bus 03] partially hidden behind bridge 0000:01 [bus 01] ... pci_bus 0000:04: [bus 04] partially hidden behind bridge 0000:01 [bus 01] ... pci_bus 0000:05: [bus 05] partially hidden behind bridge 0000:01 [bus 01] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 05 pci_bus 0000:02: busn_res: can not insert [bus 02-05] under [bus 01] (conflicts with (null) [bus 01]) pci_bus 0000:02: [bus 02-05] partially hidden behind bridge 0000:01 [bus 01] Fixes: a20c7f36bd3d ("PCI: Do not allocate more buses than available in parent") Tested-by: Niklas Cassel Tested-by: Fabio Estevam Tested-by: Sebastian Reichel Signed-off-by: Koen Vandeputte Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Mika Westerberg Acked-by: Lucas Stach Cc: stable@vger.kernel.org # v4.15+ Cc: Binghui Wang Cc: Jesper Nilsson Cc: Jianguo Sun Cc: Jingoo Han Cc: Kishon Vijay Abraham I Cc: Lucas Stach Cc: Mika Westerberg Cc: Minghuan Lian Cc: Mingkai Hu Cc: Murali Karicheri Cc: Pratyush Anand Cc: Richard Zhu Cc: Roy Zang Cc: Shawn Guo Cc: Stanimir Varbanov Cc: Thomas Petazzoni Cc: Xiaowei Song Cc: Zhou Wang Signed-off-by: Greg Kroah-Hartman

PCI: keystone: Fix interrupt-controller-node lookup

2018-02-22T14:40:07Z

commit eac56aa3bc8af3d9b9850345d0f2da9d83529134 upstream. Fix child-node lookup during initialisation which was using the wrong OF-helper and ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent pci node could end up being prematurely freed as of_find_node_by_name() drops a reference to its first argument. Any matching child interrupt-controller node was also leaked. Fixes: 0c4ffcfe1fbc ("PCI: keystone: Add TI Keystone PCIe driver") Cc: stable # 3.18 Acked-by: Murali Karicheri Signed-off-by: Johan Hovold [lorenzo.pieralisi@arm.com: updated commit subject] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Greg Kroah-Hartman

Merge tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2017-11-15T23:01:28Z

Pull PCI updates from Bjorn Helgaas: - detach driver before tearing down procfs/sysfs (Alex Williamson) - disable PCIe services during shutdown (Sinan Kaya) - fix ASPM oops on systems with no Root Ports (Ard Biesheuvel) - fix ASPM LTR_L1.2_THRESHOLD programming (Bjorn Helgaas) - fix ASPM Common_Mode_Restore_Time computation (Bjorn Helgaas) - fix portdrv MSI/MSI-X vector allocation (Dongdong Liu, Bjorn Helgaas) - report non-fatal AER errors only to the affected endpoint (Gabriele Paoloni) - distribute bus numbers, MMIO, and I/O space among hotplug bridges to allow more devices to be hot-added (Mika Westerberg) - fix pciehp races during initialization and surprise link down (Mika Westerberg) - handle surprise-removed devices in PME handling (Qiang) - support resizable BARs for large graphics devices (Christian König) - expose SR-IOV offset, stride, and VF device ID via sysfs (Filippo Sironi) - create SR-IOV virtfn/physfn sysfs links before attaching driver (Stuart Hayes) - fix SR-IOV "ARI Capable Hierarchy" restore issue (Tony Nguyen) - enforce Kconfig IOV/REALLOC dependency (Sascha El-Sharkawy) - avoid slot reset if bridge itself is broken (Jan Glauber) - clean up pci_reset_function() path (Jan H. Schönherr) - make pci_map_rom() fail if the option ROM is invalid (Changbin Du) - convert timers to timer_setup() (Kees Cook) - move PCI_QUIRKS to PCI bus Kconfig menu (Randy Dunlap) - constify pci_dev_type and intel_mid_pci_ops (Bhumika Goyal) - remove unnecessary pci_dev, pci_bus, resource, pcibios_set_master() declarations (Bjorn Helgaas) - fix endpoint framework overflows and BUG()s (Dan Carpenter) - fix endpoint framework issues (Kishon Vijay Abraham I) - avoid broken Cavium CN8xxx bus reset behavior (David Daney) - extend Cavium ACS capability quirks (Vadim Lomovtsev) - support Synopsys DesignWare RC in ECAM mode (Ard Biesheuvel) - turn off dra7xx clocks cleanly on shutdown (Keerthy) - fix Faraday probe error path (Wei Yongjun) - support HiSilicon STB SoC PCIe host controller (Jianguo Sun) - fix Hyper-V interrupt affinity issue (Dexuan Cui) - remove useless ACPI warning for Hyper-V pass-through devices (Vitaly Kuznetsov) - support multiple MSI on iProc (Sandor Bodo-Merle) - support Layerscape LS1012a and LS1046a PCIe host controllers (Hou Zhiqiang) - fix Layerscape default error response (Minghuan Lian) - support MSI on Tango host controller (Marc Gonzalez) - support Tegra186 PCIe host controller (Manikanta Maddireddy) - use generic accessors on Tegra when possible (Thierry Reding) - support V3 Semiconductor PCI host controller (Linus Walleij) * tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (85 commits) PCI/ASPM: Add L1 Substates definitions PCI/ASPM: Reformat ASPM register definitions PCI/ASPM: Use correct capability pointer to program LTR_L1.2_THRESHOLD PCI/ASPM: Account for downstream device's Port Common_Mode_Restore_Time PCI: xgene: Rename xgene_pcie_probe_bridge() to xgene_pcie_probe() PCI: xilinx: Rename xilinx_pcie_link_is_up() to xilinx_pcie_link_up() PCI: altera: Rename altera_pcie_link_is_up() to altera_pcie_link_up() PCI: Fix kernel-doc build warning PCI: Fail pci_map_rom() if the option ROM is invalid PCI: Move pci_map_rom() error path PCI: Move PCI_QUIRKS to the PCI bus menu alpha/PCI: Make pdev_save_srm_config() static PCI: Remove unused declarations PCI: Remove redundant pci_dev, pci_bus, resource declarations PCI: Remove redundant pcibios_set_master() declarations PCI/PME: Handle invalid data when reading Root Status PCI: hv: Use effective affinity mask PCI: pciehp: Do not clear Presence Detect Changed during initialization PCI: pciehp: Fix race condition handling surprise link down PCI: Distribute available resources to hotplug-capable bridges ...

Merge branch 'pci/host-layerscape' into next

2017-11-14T18:11:33Z

* pci/host-layerscape: PCI: layerscape: Change default error response behavior PCI: Disable MSI for Freescale Layerscape PCIe RC mode arm64: dts: ls1046a: Add PCIe controller DT nodes arm64: dts: ls1012a: Add PCIe controller DT node PCI: layerscape: Add support for ls1012a arm64: dts: ls1012a: Add MSI controller DT node irqchip/ls-scfg-msi: Add LS1012a MSI support

Merge branch 'pci/host-hisi' into next

2017-11-14T18:11:31Z

* pci/host-hisi: PCI: hisi: Add HiSilicon STB SoC PCIe controller driver

Merge tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2017-11-14T05:14:07Z

Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver updates for 4.15-rc1. There is the usual amount of gadget and xhci driver updates, along with phy and chipidea enhancements. There's also a lot of SPDX tags and license boilerplate cleanups as well, which provide some churn in the diffstat. Other major thing is the typec code that moved out of staging and into the "real" part of the drivers/usb/ tree, which was nice to see happen. All of these have been in linux-next with no reported issues for a while" * tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits) usb: gadget: f_fs: Fix use-after-free in ffs_free_inst USB: usbfs: compute urb->actual_length for isochronous usb: core: message: remember to reset 'ret' to 0 when necessary USB: typec: Remove remaining redundant license text USB: typec: add SPDX identifiers to some files USB: renesas_usbhs: rcar?.h: add SPDX tags USB: chipidea: ci_hdrc_tegra.c: add SPDX line USB: host: xhci-debugfs: add SPDX lines USB: add SPDX identifiers to all remaining Makefiles usb: host: isp1362-hcd: remove a couple of redundant assignments USB: adutux: remove redundant variable minor usb: core: add a new usb_get_ptm_status() helper usb: core: add a 'type' parameter to usb_get_status() usb: core: introduce a new usb_get_std_status() helper usb: core: rename usb_get_status() 'type' argument to 'recip' usb: core: add Status Type definitions USB: gadget: Remove redundant license text USB: gadget: function: Remove redundant license text USB: gadget: udc: Remove redundant license text USB: gadget: legacy: Remove redundant license text ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

PCI: hisi: Add HiSilicon STB SoC PCIe controller driver

2017-10-24T19:48:20Z

Add a HiSilicon STB SoC PCIe controller driver. This controller is based on the DesignWare PCIe core. Signed-off-by: Jianguo Sun Signed-off-by: Shawn Guo Signed-off-by: Bjorn Helgaas

PCI: dra7xx: Create functional dependency between PCIe and PHY

2017-10-23T05:49:27Z

PCI core access configuration space registers in resume_noirq callbacks. In the case of dra7xx, PIPE3 PHY connected to PCIe controller has to be enabled before accessing configuration space registers. Since PIPE3 PHY is enabled by only configuring control module registers, no aborts has been observed so far (though during noirq stage, interface clock of PIPE3 PHY is not enabled). With new TRM updates, PIPE3 PHY has to be initialized (PIPE3 PHY registers has to be accessed) as well which requires the interface clock of PIPE3 PHY to be enabled. The interface clock of PIPE3 PHY is derived from OCP2SCP and hence PCIe PHY is modeled as a child of OCP2SCP. Since pm_runtime is not enabled during noirq stage, pm_runtime_get_sync done in phy_init doesn't enable OCP2SCP clocks resulting in abort when PIPE3 PHY registers are accessed. Create a function dependency between PCIe and PHY here to make sure PCIe is suspended before PCIe PHY/OCP2SCP and resumed after PCIe PHY/OCP2SCP. Suggested-by: Grygorii Strashko Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sekhar Nori Acked-by: Bjorn Helgaas