kernel.git/drivers/pci/controller/dwc, branch linux-6.4.y

PCI: qcom-ep: Switch MHI bus master clock off during L1SS

2023-09-13T07:48:20Z

[ Upstream commit b9cbc06049cb6b7a322d708c2098195fb9fdcc4c ] Currently, as part of the qcom_pcie_perst_deassert() function, instead of writing the updated value to clear PARF_MSTR_AXI_CLK_EN, the variable "val" is re-read. This must be fixed to ensure that the master clock supplied to the MHI bus is correctly gated during L1.1/L1.2 to save power. Thus, replace the line that re-reads "val" with a line that writes the updated value to the register to clear PARF_MSTR_AXI_CLK_EN. [kwilczynski: commit log] Fixes: c457ac029e44 ("PCI: qcom-ep: Gate Master AXI clock to MHI bus during L1SS") Link: https://lore.kernel.org/linux-pci/20230627141036.11600-1-manivannan.sadhasivam@linaro.org Reported-by: Krzysztof Wilczyński Signed-off-by: Manivannan Sadhasivam Signed-off-by: Krzysztof Wilczyński Signed-off-by: Sasha Levin

Revert "PCI: tegra194: Enable support for 256 Byte payload"

2023-09-13T07:47:56Z

commit ebfde1584d9f037b6309fc682c96e22dac7bcb7a upstream. After commit 4fb8e46c1bc4 ("PCI: tegra194: Enable support for 256 Byte payload"), we initialize MPS=256 for tegra194 Root Ports before enumerating the hierarchy. Consider an Endpoint that supports only MPS=128. In the default situation (CONFIG_PCIE_BUS_DEFAULT set and no "pci=pcie_bus_*" parameter), Linux tries to configure the MPS of every device to match the upstream bridge. If the Endpoint is directly below the Root Port, Linux can reduce the Root Port MPS to 128 to match the Endpoint. But if there's a switch in the middle, Linux doesn't reduce the Root Port MPS because other devices below the switch may already be configured with MPS larger than 128. This scenario results in uncorrectable Malformed TLP errors if the Root Port sends TLPs with payloads larger than 128 bytes. These errors can be avoided by using the "pci=pcie_bus_safe" parameter, but it doesn't seem to be a good idea to always have this parameter even for basic functionality to work. Revert commit 4fb8e46c1bc4 ("PCI: tegra194: Enable support for 256 Byte payload") so the Root Ports default to MPS=128, which all devices support. If peer-to-peer DMA is not required, one can use "pci=pcie_bus_perf" to get the benefit of larger MPS settings. [bhelgaas: commit log; kwilczynski: retain "u16 val_16" declaration at the top, add missing acked by tag] Fixes: 4fb8e46c1bc4 ("PCI: tegra194: Enable support for 256 Byte payload") Link: https://lore.kernel.org/linux-pci/20230619102604.3735001-1-vidyas@nvidia.com Signed-off-by: Vidya Sagar Signed-off-by: Krzysztof Wilczyński Acked-by: Jon Hunter Cc: stable@vger.kernel.org # v6.0-rc1+ Signed-off-by: Greg Kroah-Hartman

PCI: tegra194: Fix possible array out of bounds access

2023-08-23T15:32:25Z

[ Upstream commit 205b3d02d57ce6dce96f6d2b9c230f56a9bf9817 ] Add check to fix the possible array out of bounds violation by making speed equal to GEN1_CORE_CLK_FREQ when its value is more than the size of "pcie_gen_freq" array. This array has size of four but possible speed (CLS) values are from "0 to 0xF". So, "speed - 1" values are "-1 to 0xE". Suggested-by: Bjorn Helgaas Signed-off-by: Sumit Gupta Link: https://lore.kernel.org/lkml/72b9168b-d4d6-4312-32ea-69358df2f2d0@nvidia.com/ Acked-by: Lorenzo Pieralisi Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin

PCI: qcom: Disable write access to read only registers for IP v2.3.3

2023-07-23T11:53:59Z

commit a33d700e8eea76c62120cb3dbf5e01328f18319a upstream. In the post init sequence of v2.9.0, write access to read only registers are not disabled after updating the registers. Fix it by disabling the access after register update. Link: https://lore.kernel.org/r/20230619150408.8468-2-manivannan.sadhasivam@linaro.org Fixes: 5d76117f070d ("PCI: qcom: Add support for IPQ8074 PCIe controller") Signed-off-by: Manivannan Sadhasivam Signed-off-by: Lorenzo Pieralisi Cc: Signed-off-by: Greg Kroah-Hartman

PCI: qcom: Disable write access to read only registers for IP v2.9.0

2023-07-19T14:36:16Z

[ Upstream commit 200b8f85f2021362adcc8efb575652a2aa44c099 ] In the post init sequence of v2.9.0, write access to read only registers are not disabled after updating the registers. Fix it by disabling the access after register update. While at it, let's also add a newline after existing dw_pcie_dbi_ro_wr_en() guard function to align with rest of the driver. Link: https://lore.kernel.org/r/20230619150408.8468-4-manivannan.sadhasivam@linaro.org Fixes: 0cf7c2efe8ac ("PCI: qcom: Add IPQ60xx support") Signed-off-by: Manivannan Sadhasivam Signed-off-by: Lorenzo Pieralisi Reviewed-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

PCI: qcom: Use DWC helpers for modifying the read-only DBI registers

2023-07-19T14:36:16Z

[ Upstream commit 60f0072d7fb7996b9a524ef0d152e21205473192 ] DWC core already exposes dw_pcie_dbi_ro_wr_{en/dis} helper APIs for enabling and disabling the write access to read only DBI registers. So let's use them instead of doing it manually. Also, the existing code doesn't disable the write access when it's done. This is also fixed now. Link: https://lore.kernel.org/r/20230619150408.8468-3-manivannan.sadhasivam@linaro.org Fixes: 5d76117f070d ("PCI: qcom: Add support for IPQ8074 PCIe controller") Signed-off-by: Manivannan Sadhasivam Signed-off-by: Lorenzo Pieralisi Reviewed-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

Merge tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2023-04-27T17:45:30Z

Pull pci updates from Bjorn Helgaas: "Resource management: - Add pci_dev_for_each_resource() and pci_bus_for_each_resource() iterators PCIe native device hotplug: - Fix AB-BA deadlock between reset_lock and device_lock Power management: - Wait longer for devices to become ready after resume (as we do for reset) to accommodate Intel Titan Ridge xHCI devices - Extend D3hot delay for NVIDIA HDA controllers to avoid unrecoverable devices after a bus reset Error handling: - Clear PCIe Device Status after EDR since generic error recovery now only clears it when AER is native ASPM: - Work around Chromebook firmware defect that clobbers Capability list (including ASPM L1 PM Substates Cap) when returning from D3cold to D0 Freescale i.MX6 PCIe controller driver: - Install imprecise external abort handler only when DT indicates PCIe support Freescale Layerscape PCIe controller driver: - Add ls1028a endpoint mode support Qualcomm PCIe controller driver: - Add SM8550 DT binding and driver support - Add SDX55 DT binding and driver support - Use bulk APIs for clocks of IP 1.0.0, 2.3.2, 2.3.3 - Use bulk APIs for reset of IP 2.1.0, 2.3.3, 2.4.0 - Add DT "mhi" register region for supported SoCs - Expose link transition counts via debugfs to help debug low power issues - Support system suspend and resume; reduce interconnect bandwidth and turn off clock and PHY if there are no active devices - Enable async probe by default to reduce boot time Miscellaneous: - Sort controller Kconfig entries by vendor" * tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (56 commits) PCI: xilinx: Drop obsolete dependency on COMPILE_TEST PCI: mobiveil: Sort Kconfig entries by vendor PCI: dwc: Sort Kconfig entries by vendor PCI: Sort controller Kconfig entries by vendor PCI: Use consistent controller Kconfig menu entry language PCI: xilinx-nwl: Add 'Xilinx' to Kconfig prompt PCI: hv: Add 'Microsoft' to Kconfig prompt PCI: meson: Add 'Amlogic' to Kconfig prompt PCI: Use of_property_present() for testing DT property presence PCI/PM: Extend D3hot delay for NVIDIA HDA controllers dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties PCI: qcom: Add SM8550 PCIe support dt-bindings: PCI: qcom: Add SM8550 compatible PCI: qcom: Add support for SDX55 SoC dt-bindings: PCI: qcom-ep: Fix the unit address used in example dt-bindings: PCI: qcom: Add SDX55 SoC dt-bindings: PCI: qcom: Update maintainers entry PCI: qcom: Enable async probe by default PCI: qcom: Add support for system suspend and resume PCI/PM: Drop pci_bridge_wait_for_secondary_bus() timeout parameter ...

PCI: dwc: Sort Kconfig entries by vendor

2023-04-20T21:18:05Z

Sort Kconfig entries by vendor so they appear in alphabetical order in menuconfig. Link: https://lore.kernel.org/r/20230418174336.145585-7-helgaas@kernel.org Signed-off-by: Bjorn Helgaas

PCI: Use consistent controller Kconfig menu entry language

2023-04-20T21:18:04Z

Use "PCIe controller" consistently instead of "host bridge", "bus driver", etc. Annotate with "(host mode)" or "(endpoint mode)" as needed. Link: https://lore.kernel.org/r/20230418174336.145585-5-helgaas@kernel.org Signed-off-by: Bjorn Helgaas

PCI: meson: Add 'Amlogic' to Kconfig prompt

2023-04-20T21:18:04Z

Add the "Amlogic" vendor name to the CONFIG_PCI_MESON Kconfig prompt to match other PCIe drivers. Capitalize "Meson" to match other Meson Kconfig prompts. Link: https://lore.kernel.org/r/20230418174336.145585-2-helgaas@kernel.org Signed-off-by: Bjorn Helgaas Cc: Yue Wang