Hosts the 0x221E linux distro kernel. https://git.0xinfinity.dev/distro/kernel.git/atom?h=linux-5.4.y 2019-09-23T21:10:28Z 2019-09-23T21:10:28Z Bjorn Helgaas 2019-09-23T21:10:28Z urn:sha1:3efa7f1febe60531c0b5f0397c3e87cfa48591f7 - Fix Tegra OF node reference leak (Nishka Dasgupta) - Add #defines for PCIe Data Link Feature and Physical Layer 16.0 GT/s features (Vidya Sagar) - Disable MSI for Tegra Root Ports since they don't support using MSI for all Root Port events (Vidya Sagar) - Group DesignWare write-protected register writes together (Vidya Sagar) - Move DesignWare capability search interfaces so they can be used by both host and endpoint drivers (Vidya Sagar) - Add DesignWare extended capability search interfaces (Vidya Sagar) - Export dw_pcie_wait_for_link() so drivers can be modules (Vidya Sagar) - Add "snps,enable-cdm-check" DT binding for Configuration Dependent Module (CDM) register checking (Vidya Sagar) - Add DesignWare support for "snps,enable-cdm-check" CDM checking (Vidya Sagar) - Add "supports-clkreq" DT binding for host drivers to decide whether to advertise low power features (Vidya Sagar) - Add DT binding for Tegra194 (Vidya Sagar) - Add DT binding for Tegra194 P2U (PIPE to UPHY) block (Vidya Sagar) - Add support for Tegra194 P2U (PIPE to UPHY) (Vidya Sagar) - Add support for Tegra194 host controller (Vidya Sagar) - Add Tegra support for sideband PERST# and CLKREQ# for C5 (Vidya Sagar) - Add Tegra support for slot regulators for p2972-0000 platform (Vidya Sagar) * lorenzo/pci/tegra: arm64: tegra: Add PCIe slot supply information in p2972-0000 platform arm64: tegra: Add configuration for PCIe C5 sideband signals PCI: tegra: Add support to enable slot regulators PCI: tegra: Add support to configure sideband pins dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries dt-bindings: PCI: tegra: Add sideband pins configuration entries PCI: tegra: Add Tegra194 PCIe support phy: tegra: Add PCIe PIPE2UPHY support dt-bindings: PHY: P2U: Add Tegra194 P2U block dt-bindings: PCI: tegra: Add device tree support for Tegra194 dt-bindings: Add PCIe supports-clkreq property PCI: dwc: Add support to enable CDM register check dt-bindings: PCI: designware: Add binding for CDM register check PCI: dwc: Export dw_pcie_wait_for_link() API PCI: dwc: Add extended configuration space capability search API PCI: dwc: Move config space capability search API PCI: dwc: Group DBI registers writes requiring unlocking PCI: Disable MSI for Tegra root ports PCI: Add #defines for some of PCIe spec r4.0 features PCI: tegra: Fix OF node reference leak 2019-09-08T12:00:53Z Vidya Sagar 2019-08-13T11:36:27Z urn:sha1:56e15a238d92788a2d09e0c5c26a5de1b3156931 Add support for Synopsys DesignWare core IP based PCIe host controller present in the Tegra194 SoC. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com> 2019-08-14T09:54:13Z Xiaowei Bao 2019-08-14T02:03:30Z urn:sha1:b5b24617987f522abb5c42851ae505557f2c84f8 Add CONFIG_PCI_LAYERSCAPE_EP so that endpoint and host controller drivers can be built separately. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> 2019-04-25T21:33:07Z Jonathan Chocron 2019-03-28T11:57:56Z urn:sha1:4166bfe53093b687a0b1b22e5d943e143b8089b2 Add driver for Amazon's Annapurna Labs PCIe host controller. The controller is based on DesignWare's IP. The controller doesn't support accessing the Root Port's config space via ECAM, so we obtain its base address via an AMZN0001 device. Furthermore, the DesignWare PCIe controller doesn't filter out config transactions sent to devices 1 and up on its bus, so they are filtered by the driver. All subordinate buses do support ECAM access. Implementing specific PCI config access functions involves: - Adding an init function to obtain the Root Port's base address from an AMZN0001 device. - Adding a new entry in the MCFG quirk array. [bhelgaas: Note that there is no Kconfig option for this driver because it is only intended for use with the generic ACPI host bridge driver. This driver is only needed because the DesignWare IP doesn't completely support ECAM access to the root bus.] Link: https://lore.kernel.org/lkml/1553774276-24675-1-git-send-email-jonnyc@amazon.com Co-developed-by: Vladimir Aerov <vaerov@amazon.com> Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Vladimir Aerov <vaerov@amazon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> 2019-02-21T10:40:55Z Xiaowei Bao 2019-02-21T03:16:19Z urn:sha1:a805770d8a22c59e72149aabed7e40ece6d627c8 Add the PCIe EP mode support to the layerscape platform controller. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <minghuan.lian@nxp.com> Reviewed-by: Zhiqiang Hou <zhiqiang.hou@nxp.com> Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com> 2019-01-02T21:31:15Z Bjorn Helgaas 2019-01-02T21:31:15Z urn:sha1:cdf4f4dc118bafd97d0148d53730e396ece11afa - Add UniPhier PCIe controller driver and DT bindings (Kunihiko Hayashi) * remotes/lorenzo/pci/uniphier: PCI: uniphier: Add UniPhier PCIe host controller support dt-bindings: PCI: Add UniPhier PCIe host controller description # Conflicts: # drivers/pci/controller/dwc/Kconfig # drivers/pci/controller/dwc/Makefile 2018-12-19T10:25:44Z Kunihiko Hayashi 2018-12-07T00:53:12Z urn:sha1:7e6d5cd88a6f4961ed2968799ef98528c13ac5f8 This introduces specific glue layer for UniPhier platform to support PCIe host controller that is based on the DesignWare PCIe core, and this driver supports Root Complex (host) mode. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> 2018-12-19T10:24:30Z Yue Wang 2018-12-18T08:04:46Z urn:sha1:9c0ef6d34fdbfb4f948b96d7611f0fd47649044e The Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core. This patch adds the driver support for Meson PCIe controller. Link: https://lore.kernel.org/linux-pci/20181218224708.GB22610@google.com/ Signed-off-by: Yue Wang <yue.wang@amlogic.com> Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com> [lorenzo.pieralisi@arm.com: updated coding/comment style] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> 2018-10-17T08:43:44Z Kishon Vijay Abraham I 2018-10-17T07:40:59Z urn:sha1:b492aca35c982011500377797d2e85b36fffda22 No functional change. Having two different files for keystone PCI driver doesn't serve any purpose. Merge pci-keystone-dw.c and pci-keystone.c into a single pci-keystone.c file and remove pci-keystone.h. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> 2018-06-08T12:50:11Z Shawn Lin 2018-05-31T01:12:37Z urn:sha1:6e0832fa432ec99c94caee733c8f5851cf85560b Native PCI drivers for root complex devices were originally all in drivers/pci/host/. Some of these devices can also be operated in endpoint mode. Drivers for endpoint mode didn't seem to fit in the "host" directory, so we put both the root complex and endpoint drivers in per-device directories, e.g., drivers/pci/dwc/, drivers/pci/cadence/, etc. These per-device directories contain trivial Kconfig and Makefiles and clutter drivers/pci/. Make a new drivers/pci/controllers/ directory and collect all the device-specific drivers there. No functional change intended. Link: https://lkml.kernel.org/r/1520304202-232891-1-git-send-email-shawn.lin@rock-chips.com Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>