kernel.git/drivers/nvme/host, branch linux-6.1.y

nvme-fc: release admin tagset if init fails

2026-02-11T12:37:23Z

[ Upstream commit d1877cc7270302081a315a81a0ee8331f19f95c8 ] nvme_fabrics creates an NVMe/FC controller in following path: nvmf_dev_write() -> nvmf_create_ctrl() -> nvme_fc_create_ctrl() -> nvme_fc_init_ctrl() nvme_fc_init_ctrl() allocates the admin blk-mq resources right after nvme_add_ctrl() succeeds. If any of the subsequent steps fail (changing the controller state, scheduling connect work, etc.), we jump to the fail_ctrl path, which tears down the controller references but never frees the admin queue/tag set. The leaked blk-mq allocations match the kmemleak report seen during blktests nvme/fc. Check ctrl->ctrl.admin_tagset in the fail_ctrl path and call nvme_remove_admin_tag_set() when it is set so that all admin queue allocations are reclaimed whenever controller setup aborts. Reported-by: Yi Zhang Reviewed-by: Justin Tee Signed-off-by: Chaitanya Kulkarni Signed-off-by: Keith Busch Signed-off-by: Sasha Levin

nvme: fix PCIe subsystem reset controller state transition

2026-02-06T15:44:20Z

[ Upstream commit 0edb475ac0a7d153318a24d4dca175a270a5cc4f ] The commit d2fe192348f9 (“nvme: only allow entering LIVE from CONNECTING state”) disallows controller state transitions directly from RESETTING to LIVE. However, the NVMe PCIe subsystem reset path relies on this transition to recover the controller on PowerPC (PPC) systems. On PPC systems, issuing a subsystem reset causes a temporary loss of communication with the NVMe adapter. A subsequent PCIe MMIO read then triggers EEH recovery, which restores the PCIe link and brings the controller back online. For EEH recovery to proceed correctly, the controller must transition back to the LIVE state. Due to the changes introduced by commit d2fe192348f9 (“nvme: only allow entering LIVE from CONNECTING state”), the controller can no longer transition directly from RESETTING to LIVE. As a result, EEH recovery exits prematurely, leaving the controller stuck in the RESETTING state. Fix this by explicitly transitioning the controller state from RESETTING to CONNECTING and then to LIVE. This satisfies the updated state transition rules and allows the controller to be successfully recovered on PPC systems following a PCIe subsystem reset. Cc: stable@vger.kernel.org Fixes: d2fe192348f9 ("nvme: only allow entering LIVE from CONNECTING state") Reviewed-by: Daniel Wagner Signed-off-by: Nilay Shroff Signed-off-by: Keith Busch Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

nvme-pci: do not directly handle subsys reset fallout

2026-02-06T15:44:20Z

[ Upstream commit 210b1f6576e8b367907e7ff51ef425062e1468e4 ] Scheduling reset_work after a nvme subsystem reset is expected to fail on pcie, but this also prevents potential handling the platform's pcie services may provide that might successfully recovering the link without re-enumeration. Such examples include AER, DPC, and power's EEH. Provide a pci specific operation that safely initiates a subsystem reset, and instead of scheduling reset work, read back the status register to trigger a pcie read error. Since this only affects pci, the other fabrics drivers subscribe to a generic nvmf subsystem reset that is exactly the same as before. The loop fabric doesn't use it because nvmet doesn't support setting that property anyway. And since we're using the magic NSSR value in two places now, provide a symbolic define for it. Reported-by: Nilay Shroff Reviewed-by: Christoph Hellwig Signed-off-by: Keith Busch Stable-dep-of: 0edb475ac0a7 ("nvme: fix PCIe subsystem reset controller state transition") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

nvme-fc: rename free_ctrl callback to match name pattern

2026-02-06T15:44:20Z

[ Upstream commit 205fb5fa6fde1b5b426015eb1ff69f2ff25ef5bb ] Rename nvme_fc_nvme_ctrl_freed to nvme_fc_free_ctrl to match the name pattern for the callback. Reviewed-by: Christoph Hellwig Reviewed-by: Sagi Grimberg Reviewed-by: Hannes Reinecke Signed-off-by: Daniel Wagner Signed-off-by: Keith Busch Stable-dep-of: 0edb475ac0a7 ("nvme: fix PCIe subsystem reset controller state transition") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

nvme-pci: disable secondary temp for Wodposit WPBSNM8

2026-02-06T15:43:59Z

commit 340f4fc5508c2905a1f30de229e2a4b299d55735 upstream. Secondary temperature thresholds (temp2_{min,max}) were not reported properly on this NVMe SSD. This resulted in an error while attempting to read these values with sensors(1): ERROR: Can't get value of subfeature temp2_min: I/O error ERROR: Can't get value of subfeature temp2_max: I/O error Add the device to the nvme_id_table with the NVME_QUIRK_NO_SECONDARY_TEMP_THRESH flag to suppress access to all non- composite temperature thresholds. Cc: stable@vger.kernel.org Tested-by: Wu Haotian Signed-off-by: Ilikara Zheng Signed-off-by: Keith Busch Signed-off-by: Greg Kroah-Hartman

nvme-fc: don't hold rport lock when putting ctrl

2026-01-11T14:18:49Z

[ Upstream commit b71cbcf7d170e51148d5467820ae8a72febcb651 ] nvme_fc_ctrl_put can acquire the rport lock when freeing the ctrl object: nvme_fc_ctrl_put nvme_fc_ctrl_free spin_lock_irqsave(rport->lock) Thus we can't hold the rport lock when calling nvme_fc_ctrl_put. Justin suggested use the safe list iterator variant because nvme_fc_ctrl_put will also modify the rport->list. Cc: Justin Tee Reviewed-by: Christoph Hellwig Signed-off-by: Daniel Wagner Signed-off-by: Keith Busch Signed-off-by: Sasha Levin

nvme-multipath: fix lockdep WARN due to partition scan work

2025-12-06T21:12:39Z

[ Upstream commit 6d87cd5335784351280f82c47cc8a657271929c3 ] Blktests test cases nvme/014, 057 and 058 fail occasionally due to a lockdep WARN. As reported in the Closes tag URL, the WARN indicates that a deadlock can happen due to the dependency among disk->open_mutex, kblockd workqueue completion and partition_scan_work completion. To avoid the lockdep WARN and the potential deadlock, cut the dependency by running the partition_scan_work not by kblockd workqueue but by nvme_wq. Reported-by: Yi Zhang Closes: https://lore.kernel.org/linux-block/CAHj4cs8mJ+R_GmQm9R8ebResKAWUE8kF5+_WVg0v8zndmqd6BQ@mail.gmail.com/ Link: https://lore.kernel.org/linux-block/oeyzci6ffshpukpfqgztsdeke5ost5hzsuz4rrsjfmvpqcevax@5nhnwbkzbrpa/ Fixes: 1f021341eef4 ("nvme-multipath: defer partition scanning") Signed-off-by: Shin'ichiro Kawasaki Reviewed-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Signed-off-by: Keith Busch Signed-off-by: Sasha Levin

nvme: nvme-fc: Ensure ->ioerr_work is cancelled in nvme_fc_delete_ctrl()

2025-12-06T21:12:37Z

commit 0a2c5495b6d1ecb0fa18ef6631450f391a888256 upstream. nvme_fc_delete_assocation() waits for pending I/O to complete before returning, and an error can cause ->ioerr_work to be queued after cancel_work_sync() had been called. Move the call to cancel_work_sync() to be after nvme_fc_delete_association() to ensure ->ioerr_work is not running when the nvme_fc_ctrl object is freed. Otherwise the following can occur: [ 1135.911754] list_del corruption, ff2d24c8093f31f8->next is NULL [ 1135.917705] ------------[ cut here ]------------ [ 1135.922336] kernel BUG at lib/list_debug.c:52! [ 1135.926784] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 1135.931851] CPU: 48 UID: 0 PID: 726 Comm: kworker/u449:23 Kdump: loaded Not tainted 6.12.0 #1 PREEMPT(voluntary) [ 1135.943490] Hardware name: Dell Inc. PowerEdge R660/0HGTK9, BIOS 2.5.4 01/16/2025 [ 1135.950969] Workqueue: 0x0 (nvme-wq) [ 1135.954673] RIP: 0010:__list_del_entry_valid_or_report.cold+0xf/0x6f [ 1135.961041] Code: c7 c7 98 68 72 94 e8 26 45 fe ff 0f 0b 48 c7 c7 70 68 72 94 e8 18 45 fe ff 0f 0b 48 89 fe 48 c7 c7 80 69 72 94 e8 07 45 fe ff <0f> 0b 48 89 d1 48 c7 c7 a0 6a 72 94 48 89 c2 e8 f3 44 fe ff 0f 0b [ 1135.979788] RSP: 0018:ff579b19482d3e50 EFLAGS: 00010046 [ 1135.985015] RAX: 0000000000000033 RBX: ff2d24c8093f31f0 RCX: 0000000000000000 [ 1135.992148] RDX: 0000000000000000 RSI: ff2d24d6bfa1d0c0 RDI: ff2d24d6bfa1d0c0 [ 1135.999278] RBP: ff2d24c8093f31f8 R08: 0000000000000000 R09: ffffffff951e2b08 [ 1136.006413] R10: ffffffff95122ac8 R11: 0000000000000003 R12: ff2d24c78697c100 [ 1136.013546] R13: fffffffffffffff8 R14: 0000000000000000 R15: ff2d24c78697c0c0 [ 1136.020677] FS: 0000000000000000(0000) GS:ff2d24d6bfa00000(0000) knlGS:0000000000000000 [ 1136.028765] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1136.034510] CR2: 00007fd207f90b80 CR3: 000000163ea22003 CR4: 0000000000f73ef0 [ 1136.041641] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1136.048776] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 1136.055910] PKRU: 55555554 [ 1136.058623] Call Trace: [ 1136.061074] [ 1136.063179] ? show_trace_log_lvl+0x1b0/0x2f0 [ 1136.067540] ? show_trace_log_lvl+0x1b0/0x2f0 [ 1136.071898] ? move_linked_works+0x4a/0xa0 [ 1136.075998] ? __list_del_entry_valid_or_report.cold+0xf/0x6f [ 1136.081744] ? __die_body.cold+0x8/0x12 [ 1136.085584] ? die+0x2e/0x50 [ 1136.088469] ? do_trap+0xca/0x110 [ 1136.091789] ? do_error_trap+0x65/0x80 [ 1136.095543] ? __list_del_entry_valid_or_report.cold+0xf/0x6f [ 1136.101289] ? exc_invalid_op+0x50/0x70 [ 1136.105127] ? __list_del_entry_valid_or_report.cold+0xf/0x6f [ 1136.110874] ? asm_exc_invalid_op+0x1a/0x20 [ 1136.115059] ? __list_del_entry_valid_or_report.cold+0xf/0x6f [ 1136.120806] move_linked_works+0x4a/0xa0 [ 1136.124733] worker_thread+0x216/0x3a0 [ 1136.128485] ? __pfx_worker_thread+0x10/0x10 [ 1136.132758] kthread+0xfa/0x240 [ 1136.135904] ? __pfx_kthread+0x10/0x10 [ 1136.139657] ret_from_fork+0x31/0x50 [ 1136.143236] ? __pfx_kthread+0x10/0x10 [ 1136.146988] ret_from_fork_asm+0x1a/0x30 [ 1136.150915] Fixes: 19fce0470f05 ("nvme-fc: avoid calling _nvme_fc_abort_outstanding_ios from interrupt context") Cc: stable@vger.kernel.org Tested-by: Marco Patalano Reviewed-by: Justin Tee Signed-off-by: Ewan D. Milne Signed-off-by: Keith Busch Signed-off-by: Greg Kroah-Hartman

nvme: Use non zero KATO for persistent discovery connections

2025-12-06T21:12:17Z

[ Upstream commit 2e482655019ab6fcfe8865b62432c6d03f0b5f80 ] The NVMe Base Specification 2.1 states that: """ A host requests an explicit persistent connection ... by specifying a non-zero Keep Alive Timer value in the Connect command. """ As such if we are starting a persistent connection to a discovery controller and the KATO is currently 0 we need to update KATO to a non zero value to avoid continuous timeouts on the target. Signed-off-by: Alistair Francis Reviewed-by: Hannes Reinecke Reviewed-by: Christoph Hellwig Signed-off-by: Keith Busch Signed-off-by: Sasha Levin

nvme-fc: use lock accessing port_state and rport state

2025-12-06T21:12:16Z

[ Upstream commit 891cdbb162ccdb079cd5228ae43bdeebce8597ad ] nvme_fc_unregister_remote removes the remote port on a lport object at any point in time when there is no active association. This races with with the reconnect logic, because nvme_fc_create_association is not taking a lock to check the port_state and atomically increase the active count on the rport. Reported-by: Shinichiro Kawasaki Closes: https://lore.kernel.org/all/u4ttvhnn7lark5w3sgrbuy2rxupcvosp4qmvj46nwzgeo5ausc@uyrkdls2muwx Signed-off-by: Daniel Wagner Reviewed-by: Hannes Reinecke Signed-off-by: Keith Busch Signed-off-by: Sasha Levin