kernel.git/drivers/nvme/host/fc.c, branch linux-4.19.y

nvme-fc: fail new connections to a deleted host or remote port

2020-10-07T06:00:07Z

[ Upstream commit 9e0e8dac985d4bd07d9e62922b9d189d3ca2fccf ] The lldd may have made calls to delete a remote port or local port and the delete is in progress when the cli then attempts to create a new controller. Currently, this proceeds without error although it can't be very successful. Fix this by validating that both the host port and remote port are present when a new controller is to be created. Signed-off-by: James Smart Reviewed-by: Himanshu Madhani Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin

nvme-fc: cancel async events before freeing event struct

2020-09-23T10:10:58Z

[ Upstream commit e126e8210e950bb83414c4f57b3120ddb8450742 ] Cancel async event work in case async event has been queued up, and nvme_fc_submit_async_event() runs after event has been freed. Signed-off-by: David Milburn Reviewed-by: Keith Busch Reviewed-by: Sagi Grimberg Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin

nvme-fc: Fix wrong return value in __nvme_fc_init_request()

2020-09-03T09:24:23Z

[ Upstream commit f34448cd0dc697723fb5f4118f8431d9233b370d ] On an error exit path, a negative error code should be returned instead of a positive return value. Fixes: e399441de9115 ("nvme-fabrics: Add host support for FC transport") Cc: James Smart Signed-off-by: Tianjia Zhang Reviewed-by: Chaitanya Kulkarni Reviewed-by: Christoph Hellwig Signed-off-by: Sagi Grimberg Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

nvme-fc: Revert "add module to ops template to allow module references"

2020-04-17T08:48:45Z

commit 8c5c660529209a0e324c1c1a35ce3f83d67a2aa5 upstream. The original patch was to resolve the lldd being able to be unloaded while being used to talk to the boot device of the system. However, the end result of the original patch is that any driver unload while a nvme controller is live via the lldd is now being prohibited. Given the module reference, the module teardown routine can't be called, thus there's no way, other than manual actions to terminate the controllers. Fixes: 863fbae929c7 ("nvme_fc: add module to ops template to allow module references") Cc: # v5.4+ Signed-off-by: James Smart Reviewed-by: Himanshu Madhani Signed-off-by: Christoph Hellwig Signed-off-by: Greg Kroah-Hartman

nvme-fc: fix double-free scenarios on hw queues

2020-01-09T09:18:54Z

[ Upstream commit c869e494ef8b5846d9ba91f1e922c23cd444f0c1 ] If an error occurs on one of the ios used for creating an association, the creating routine has error paths that are invoked by the command failure and the error paths will free up the controller resources created to that point. But... the io was ultimately determined by an asynchronous completion routine that detected the error and which unconditionally invokes the error_recovery path which calls delete_association. Delete association deletes all outstanding io then tears down the controller resources. So the create_association thread can be running in parallel with the error_recovery thread. What was seen was the LLDD received a call to delete a queue, causing the LLDD to do a free of a resource, then the transport called the delete queue again causing the driver to repeat the free call. The second free routine corrupted the allocator. The transport shouldn't be making the duplicate call, and the delete queue is just one of the resources being freed. To fix, it is realized that the create_association path is completely serialized with one command at a time. So the failed io completion will always be seen by the create_association path and as of the failure, there are no ios to terminate and there is no reason to be manipulating queue freeze states, etc. The serialized condition stays true until the controller is transitioned to the LIVE state. Thus the fix is to change the error recovery path to check the controller state and only invoke the teardown path if not already in the CONNECTING state. Reviewed-by: Himanshu Madhani Reviewed-by: Ewan D. Milne Signed-off-by: James Smart Signed-off-by: Keith Busch Signed-off-by: Sasha Levin

nvme_fc: add module to ops template to allow module references

2020-01-09T09:18:54Z

[ Upstream commit 863fbae929c7a5b64e96b8a3ffb34a29eefb9f8f ] In nvme-fc: it's possible to have connected active controllers and as no references are taken on the LLDD, the LLDD can be unloaded. The controller would enter a reconnect state and as long as the LLDD resumed within the reconnect timeout, the controller would resume. But if a namespace on the controller is the root device, allowing the driver to unload can be problematic. To reload the driver, it may require new io to the boot device, and as it's no longer connected we get into a catch-22 that eventually fails, and the system locks up. Fix this issue by taking a module reference for every connected controller (which is what the core layer did to the transport module). Reference is cleared when the controller is removed. Acked-by: Himanshu Madhani Reviewed-by: Christoph Hellwig Signed-off-by: James Smart Signed-off-by: Keith Busch Signed-off-by: Sasha Levin

nvme-fc: use separate work queue to avoid warning

2019-09-16T06:21:44Z

[ Upstream commit 8730c1ddb69bdeeb10c1f613a4e15e95862b1981 ] When tearing down a controller the following warning is issued: WARNING: CPU: 0 PID: 30681 at ../kernel/workqueue.c:2418 check_flush_dependency This happens as the err_work workqueue item is scheduled on the system workqueue (which has WQ_MEM_RECLAIM not set), but is flushed from a workqueue which has WQ_MEM_RECLAIM set. Fix this by providing an FC-NVMe specific workqueue. Fixes: 4cff280a5fcc ("nvme-fc: resolve io failures during connect") Signed-off-by: Hannes Reinecke Reviewed-by: James Smart Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin

nvme-fc: correct csn initialization and increments on error

2019-05-10T15:54:09Z

[ Upstream commit 67f471b6ed3b09033c4ac77ea03f92afdb1989fe ] This patch fixes a long-standing bug that initialized the FC-NVME cmnd iu CSN value to 1. Early FC-NVME specs had the connection starting with CSN=1. By the time the spec reached approval, the language had changed to state a connection should start with CSN=0. This patch corrects the initialization value for FC-NVME connections. Additionally, in reviewing the transport, the CSN value is assigned to the new IU early in the start routine. It's possible that a later dma map request may fail, causing the command to never be sent to the controller. Change the location of the assignment so that it is immediately prior to calling the lldd. Add a comment block to explain the impacts if the lldd were to additionally fail sending the command. Signed-off-by: Dick Kennedy Signed-off-by: James Smart Reviewed-by: Ewan D. Milne Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin

nvme-fc: resolve io failures during connect

2018-12-13T08:16:11Z

[ Upstream commit 4cff280a5fccf6513ed9e895bb3a4e7ad8b0cedc ] If an io error occurs on an io issued while connecting, recovery of the io falls flat as the state checking ends up nooping the error handler. Create an err_work work item that is scheduled upon an io error while connecting. The work thread terminates all io on all queues and marks the queues as not connected. The termination of the io will return back to the callee, which will then back out of the connection attempt and will reschedule, if possible, the connection attempt. The changes: - in case there are several commands hitting the error handler, a state flag is kept so that the error work is only scheduled once, on the first error. The subsequent errors can be ignored. - The calling sequence to stop keep alive and terminate the queues and their io is lifted from the reset routine. Made a small service routine used by both reset and err_work. - During debugging, found that the teardown path can reference an uninitialized pointer, resulting in a NULL pointer oops. The aen_ops weren't initialized yet. Add validation on their initialization before calling the teardown routine. Signed-off-by: James Smart Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin

Merge tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block

2018-08-14T17:23:25Z

Pull block updates from Jens Axboe: "First pull request for this merge window, there will also be a followup request with some stragglers. This pull request contains: - Fix for a thundering heard issue in the wbt block code (Anchal Agarwal) - A few NVMe pull requests: * Improved tracepoints (Keith) * Larger inline data support for RDMA (Steve Wise) * RDMA setup/teardown fixes (Sagi) * Effects log suppor for NVMe target (Chaitanya Kulkarni) * Buffered IO suppor for NVMe target (Chaitanya Kulkarni) * TP4004 (ANA) support (Christoph) * Various NVMe fixes - Block io-latency controller support. Much needed support for properly containing block devices. (Josef) - Series improving how we handle sense information on the stack (Kees) - Lightnvm fixes and updates/improvements (Mathias/Javier et al) - Zoned device support for null_blk (Matias) - AIX partition fixes (Mauricio Faria de Oliveira) - DIF checksum code made generic (Max Gurtovoy) - Add support for discard in iostats (Michael Callahan / Tejun) - Set of updates for BFQ (Paolo) - Removal of async write support for bsg (Christoph) - Bio page dirtying and clone fixups (Christoph) - Set of bcache fix/changes (via Coly) - Series improving blk-mq queue setup/teardown speed (Ming) - Series improving merging performance on blk-mq (Ming) - Lots of other fixes and cleanups from a slew of folks" * tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block: (190 commits) blkcg: Make blkg_root_lookup() work for queues in bypass mode bcache: fix error setting writeback_rate through sysfs interface null_blk: add lock drop/acquire annotation Blk-throttle: reduce tail io latency when iops limit is enforced block: paride: pd: mark expected switch fall-throughs block: Ensure that a request queue is dissociated from the cgroup controller block: Introduce blk_exit_queue() blkcg: Introduce blkg_root_lookup() block: Remove two superfluous #include directives blk-mq: count the hctx as active before allocating tag block: bvec_nr_vecs() returns value for wrong slab bcache: trivial - remove tailing backslash in macro BTREE_FLAG bcache: make the pr_err statement used for ENOENT only in sysfs_attatch section bcache: set max writeback rate when I/O request is idle bcache: add code comments for bset.c bcache: fix mistaken comments in request.c bcache: fix mistaken code comments in bcache.h bcache: add a comment in super.c bcache: avoid unncessary cache prefetch bch_btree_node_get() bcache: display rate debug parameters to 0 when writeback is not running ...