kernel.git/drivers/ntb/hw/mscc, branch linux-5.6.y

ntb_hw_switchtec: make ntb_mw_set_trans() work when addr == 0

2019-09-23T21:20:40Z

On switchtec_ntb_mw_set_trans() call, when (only) address == 0, it acts as ntb_mw_clear_trans(). Fix this, since address == 0 and size != 0 is valid combination for setting translation. Signed-off-by: Alexander Fomichev Reviewed-by: Logan Gunthorpe Signed-off-by: Jon Mason

Merge tag 'ntb-5.3' of git://github.com/jonmason/ntb

2019-07-21T16:46:59Z

Pull NTB updates from Jon Mason: "New feature to add support for NTB virtual MSI interrupts, the ability to test and use this feature in the NTB transport layer. Also, bug fixes for the AMD and Switchtec drivers, as well as some general patches" * tag 'ntb-5.3' of git://github.com/jonmason/ntb: (22 commits) NTB: Describe the ntb_msi_test client in the documentation. NTB: Add MSI interrupt support to ntb_transport NTB: Add ntb_msi_test support to ntb_test NTB: Introduce NTB MSI Test Client NTB: Introduce MSI library NTB: Rename ntb.c to support multiple source files in the module NTB: Introduce functions to calculate multi-port resource index NTB: Introduce helper functions to calculate logical port number PCI/switchtec: Add module parameter to request more interrupts PCI/MSI: Support allocating virtual MSI interrupts ntb_hw_switchtec: Fix setup MW with failure bug ntb_hw_switchtec: Skip unnecessary re-setup of shared memory window for crosslink case ntb_hw_switchtec: Remove redundant steps of switchtec_ntb_reinit_peer() function NTB: correct ntb_dev_ops and ntb_dev comment typos NTB: amd: Silence shift wrapping warning in amd_ntb_db_vector_mask() ntb_hw_switchtec: potential shift wrapping bug in switchtec_ntb_init_sndev() NTB: ntb_transport: Ensure qp->tx_mw_dma_addr is initaliazed NTB: ntb_hw_amd: set peer limit register NTB: ntb_perf: Clear stale values in doorbell and command SPAD register NTB: ntb_perf: Disable NTB link after clearing peer XLAT registers ...

ntb_hw_switchtec: Fix setup MW with failure bug

2019-06-13T12:59:31Z

Switchtec does not support setting multiple MWs simultaneously. The driver takes a hardware lock to ensure that two peers are not doing this simultaneously and it fails if someone else takes the lock. In most cases, this is fine as clients only setup the MWs once on one side of the link. However, there's a race condition when a re-initialization is caused by a link event. The driver will re-setup the shared memory window asynchronously and this races with the client setting up it's memory windows on the link up event. To fix this we ensure do the entire initialization in a work queue and signal the client once it's done. Signed-off-by: Joey Zhang Signed-off-by: Wesley Sheng Signed-off-by: Jon Mason

ntb_hw_switchtec: Skip unnecessary re-setup of shared memory window for crosslink case

2019-06-13T12:59:28Z

In case of NTB crosslink topology, the setting of shared memory window in the virtual partition doesn't reset on peer's reboot. So skip the unnecessary re-setup of shared memory window for that case. Signed-off-by: Wesley Sheng Signed-off-by: Jon Mason

ntb_hw_switchtec: Remove redundant steps of switchtec_ntb_reinit_peer() function

2019-06-13T12:59:25Z

When a re-initialization is caused by a link event, the driver will re-setup the shared memory window. But at that time, the shared memory is still valid, and it's unnecessary to free, reallocate and then initialize it again. We only need to reconfigure the hardware registers. Remove the redundant steps from switchtec_ntb_reinit_peer() function. Signed-off-by: Joey Zhang Signed-off-by: Wesley Sheng Reviewed-by: Logan Gunthorpe Signed-off-by: Jon Mason

ntb_hw_switchtec: potential shift wrapping bug in switchtec_ntb_init_sndev()

2019-06-13T12:59:14Z

This code triggers a Smatch warning: drivers/ntb/hw/mscc/ntb_hw_switchtec.c:884 switchtec_ntb_init_sndev() warn: should '(1 << sndev->peer_partition)' be a 64 bit type? The "part_map" and "tpart_vec" variables are u64 type so this seems like a valid warning. Fixes: 3df54c870f52 ("ntb_hw_switchtec: Allow using Switchtec NTB in multi-partition setups") Signed-off-by: Dan Carpenter Reviewed-by: Logan Gunthorpe Signed-off-by: Jon Mason

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288

2019-06-05T15:36:37Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 263 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Alexios Zavras Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de Signed-off-by: Greg Kroah-Hartman

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge tag 'ntb-5.1' of git://github.com/jonmason/ntb

2019-03-15T21:32:59Z

Pull NTB updates from Jon Mason: - fixes for switchtec debugability and mapping table entries - NTB transport improvements - a reworking of the peer_db_addr for better abstraction * tag 'ntb-5.1' of git://github.com/jonmason/ntb: NTB: add new parameter to peer_db_addr() db_bit and db_data NTB: ntb_transport: Ensure the destination buffer is mapped for TX DMA NTB: ntb_transport: Free MWs in ntb_transport_link_cleanup() ntb_hw_switchtec: Added support of >=4G memory windows ntb_hw_switchtec: NT req id mapping table register entry number should be 512 ntb_hw_switchtec: debug print 64bit aligned crosslink BAR Numbers

NTB: add new parameter to peer_db_addr() db_bit and db_data

2019-02-13T16:03:18Z

NTB door bell usage depends on NTB hardware. ex: intel NTB gen1 has one peer door bell register which can be controlled by the bitmap writen to it, while Intel NTB gen3 has a registers per door bell and the data trigering the each door bell is always 1. therefore exposing only peer door bell address forcing the user to be aware of such low level details Signed-off-by: Leonid Ravich Acked-by: Logan Gunthorpe Acked-by: Dave Jiang Acked-by: Allen Hubbe Signed-off-by: Jon Mason