kernel.git/drivers/ntb/hw/idt, branch master

ntb: reduce stack usage in idt_scan_mws

2025-03-18T17:34:59Z

idt_scan_mws() puts a large fixed-size array on the stack and copies it into a smaller dynamically allocated array at the end. On 32-bit targets, the fixed size can easily exceed the warning limit for possible stack overflow: drivers/ntb/hw/idt/ntb_hw_idt.c:1041:27: error: stack frame size (1032) exceeds limit (1024) in 'idt_scan_mws' [-Werror,-Wframe-larger-than] Change it to instead just always use dynamic allocation for the array from the start. It's too big for the stack, but not actually all that much for a permanent allocation. Reported-by: kernel test robot Closes: https://lore.kernel.org/all/202205111109.PiKTruEj-lkp@intel.com/ Signed-off-by: Arnd Bergmann Reviewed-by: Dave Jiang Reviewed-by: Damien Le Moal Signed-off-by: Jon Mason

ntb: idt: Replace deprecated PCI functions

2024-10-30T21:07:38Z

pcim_iomap_table() and pcim_iomap_regions_request_all() have been deprecated by the PCI subsystem in commit e354bb84a4c1 ("PCI: Deprecate pcim_iomap_table(), pcim_iomap_regions_request_all()"). Replace these functions with their successors, pcim_iomap() and pcim_request_all_regions(). Link: https://lore.kernel.org/r/20241030112743.104395-8-pstanner@redhat.com Signed-off-by: Philipp Stanner Signed-off-by: Bjorn Helgaas Acked-by: Serge Semin

ntb: idt: Fix the cacography in ntb_hw_idt.c

2024-09-20T14:50:38Z

The word 'swtich' is wrong, so fix it. Signed-off-by: zhang jiao Acked-by: Serge Semin Reviewed-by: Dave Jiang Signed-off-by: Jon Mason

ntb: idt: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY

2024-04-25T17:53:30Z

Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro. Link: https://lore.kernel.org/r/20240325070944.3600338-9-dlemoal@kernel.org Signed-off-by: Damien Le Moal Signed-off-by: Bjorn Helgaas Reviewed-by: Dave Jiang

ntb: idt: drop redundant pci_enable_pcie_error_reporting()

2023-07-08T15:02:36Z

pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by: Bjorn Helgaas Acked-by: Serge Semin Signed-off-by: Jon Mason

ntb: idt: Fix error handling in idt_pci_driver_init()

2023-07-08T14:51:55Z

A problem about ntb_hw_idt create debugfs failed is triggered with the following log given: [ 1236.637636] IDT PCI-E Non-Transparent Bridge Driver 2.0 [ 1236.639292] debugfs: Directory 'ntb_hw_idt' with parent '/' already present! The reason is that idt_pci_driver_init() returns pci_register_driver() directly without checking its return value, if pci_register_driver() failed, it returns without destroy the newly created debugfs, resulting the debugfs of ntb_hw_idt can never be created later. idt_pci_driver_init() debugfs_create_dir() # create debugfs directory pci_register_driver() driver_register() bus_add_driver() priv = kzalloc(...) # OOM happened # return without destroy debugfs directory Fix by removing debugfs when pci_register_driver() returns error. Fixes: bf2a952d31d2 ("NTB: Add IDT 89HPESxNTx PCIe-switches support") Signed-off-by: Yuan Can Signed-off-by: Jon Mason

ntb: idt: fix clang -Wformat warnings

2022-08-09T15:54:40Z

When building with Clang we encounter these warnings: | drivers/ntb/hw/idt/ntb_hw_idt.c:2409:28: error: format specifies type | 'unsigned char' but the argument has type 'int' [-Werror,-Wformat] | "\t%hhu-%hhu.\t", idx + cnt - 1); - | drivers/ntb/hw/idt/ntb_hw_idt.c:2438:29: error: format specifies type | 'unsigned char' but the argument has type 'int' [-Werror,-Wformat] | "\t%hhu-%hhu.\t", idx + cnt - 1); - | drivers/ntb/hw/idt/ntb_hw_idt.c:2484:15: error: format specifies type | 'unsigned char' but the argument has type 'int' [-Werror,-Wformat], src); For the first two warnings the format specifier used is `%hhu` which describes a u8. Both `idx` and `cnt` are u8 as well. However, the expression as a whole is promoted to an int as you cannot get smaller-than-int from addition. Therefore, to fix the warning, use the promoted-to-type's format specifier -- in this case `%d`. example: `` uint8_t a = 4, b = 7; int size = sizeof(a + b - 1); printf("%d\n", size); // output: 4 ``` For the last warning, src is of type `int` while the format specifier describes a u8. The fix here is just to use the proper specifier `%d`. See more: (https://wiki.sei.cmu.edu/confluence/display/c/INT02-C.+Understand+integer+conversion+rules) "Integer types smaller than int are promoted when an operation is performed on them. If all values of the original type can be represented as an int, the value of the smaller type is converted to an int; otherwise, it is converted to an unsigned int." Link: https://github.com/ClangBuiltLinux/linux/issues/378 Signed-off-by: Justin Stitt Acked-by: Serge Semin Signed-off-by: Jon Mason

NTB: switch from 'pci_' to 'dma_' API

2021-09-05T22:08:14Z

The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET Acked-by: Serge Semin Signed-off-by: Jon Mason

ntb: idt: fix error check in ntb_hw_idt.c

2020-12-06T23:14:44Z

idt_create_dev never return NULL and fix smatch warning. Signed-off-by: Wang Qing Acked-by: Serge Semin Signed-off-by: Jon Mason

ntb: hw: remove the code that sets the DMA mask

2020-06-06T00:02:08Z

This patch removes the code that sets the DMA mask as it no longer makes sense to do this. Fixes: 7f46c8b3a552 ("NTB: ntb_tool: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe Tested-by: Alexander Fomichev Signed-off-by: Sanjay R Mehta Signed-off-by: Jon Mason