kernel.git/drivers/nfc/pn544, branch linux-4.9.y

nfc: pn544: Fix occasional HW initialization failure

2020-03-11T06:53:05Z

[ Upstream commit c3331d2fe3fd4d5e321f2467d01f72de7edfb5d0 ] The PN544 driver checks the "enable" polarity during of driver's probe and it's doing that by turning ON and OFF NFC with different polarities until enabling succeeds. It takes some time for the hardware to power-down, and thus, to deassert the IRQ that is raised by turning ON the hardware. Since the delay after last power-down of the polarity-checking process is missed in the code, the interrupt may trigger immediately after installing the IRQ handler (right after the checking is done), which results in IRQ handler trying to touch the disabled HW and ends with marking NFC as 'DEAD' during of the driver's probe: pn544_hci_i2c 1-002a: NFC: nfc_en polarity : active high pn544_hci_i2c 1-002a: NFC: invalid len byte shdlc: llc_shdlc_recv_frame: NULL Frame -> link is dead This patch fixes the occasional NFC initialization failure on Nexus 7 device. Signed-off-by: Dmitry Osipenko Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

NFC: pn544: Adjust indentation in pn544_hci_check_presence

2020-02-14T21:31:05Z

commit 5080832627b65e3772a35d1dced68c64e2b24442 upstream. Clang warns ../drivers/nfc/pn544/pn544.c:696:4: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] return nfc_hci_send_cmd(hdev, NFC_HCI_RF_READER_A_GATE, ^ ../drivers/nfc/pn544/pn544.c:692:3: note: previous statement is here if (target->nfcid1_len != 4 && target->nfcid1_len != 7 && ^ 1 warning generated. This warning occurs because there is a space after the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. Fixes: da052850b911 ("NFC: Add pn544 presence check for different targets") Link: https://github.com/ClangBuiltLinux/linux/issues/814 Signed-off-by: Nathan Chancellor Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

nfc: Drop owner assignment from i2c_driver

2016-05-01T21:38:14Z

i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Samuel Ortiz

NFC: pn544: Drop two useless checks in ACPI probe path

2016-03-03T09:34:45Z

When pn544_hci_i2c_acpi_request_resources() gets called we already know that the entries in ->acpi_match_table have matched ACPI ID of the device. In addition I2C client pointer cannot be NULL in any case (otherwise I2C core would not call ->probe() for the driver in the first place). Drop the two useless checks from the driver. Signed-off-by: Mika Westerberg Signed-off-by: Samuel Ortiz

nfc: pn544: Remove i2c client gpio irq configuration

2015-12-29T18:06:23Z

gpio irq is already configured by the core i2c layers when reaching the probe function Signed-off-by: Christophe Ricard Signed-off-by: Samuel Ortiz

nfc: pn544: Remove #ifdef CONFIG_OF

2015-12-29T18:06:14Z

All of_* APIs are safe if CONFIG_OF is not define. Signed-off-by: Christophe Ricard Signed-off-by: Samuel Ortiz

Merge tag 'char-misc-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2015-11-05T06:15:15Z

Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver update for 4.4-rc1. Lots of different driver and subsystem updates, hwtracing being the largest with the addition of some new platforms that are now supported. Full details in the shortlog. All of these have been in linux-next for a long time with no reported issues" * tag 'char-misc-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (181 commits) fpga: socfpga: Fix check of return value of devm_request_irq lkdtm: fix ACCESS_USERSPACE test mcb: Destroy IDA on module unload mcb: Do not return zero on error path in mcb_pci_probe() mei: bus: set the device name before running fixup mei: bus: use correct lock ordering mei: Fix debugfs filename in error output char: ipmi: ipmi_ssif: Replace timeval with timespec64 fpga: zynq-fpga: Fix issue with drvdata being overwritten. fpga manager: remove unnecessary null pointer checks fpga manager: ensure lifetime with of_fpga_mgr_get fpga: zynq-fpga: Change fw format to handle bin instead of bit. fpga: zynq-fpga: Fix unbalanced clock handling misc: sram: partition base address belongs to __iomem space coresight: etm3x: adding documentation for sysFS's cpu interface vme: 8-bit status/id takes 256 values, not 255 fpga manager: Adding FPGA Manager support for Xilinx Zynq 7000 ARM: zynq: dt: Updated devicetree for Zynq 7000 platform. ARM: dt: fpga: Added binding docs for Xilinx Zynq FPGA manager. ver_linux: proc/modules, limit text processing to 'sed' ...

NFC: pn544: Auto-select core module

2015-10-19T17:56:28Z

As I understand it, the core nfc_pn544 module is useless without either the I2C or the MEI access module. So hide NFC_PN544 and select it automatically if either NFC_PN544_I2C or NFC_PN544_MEI is selected. This avoids presenting NFC_PN544 when neither NFC_PN544_I2C nor NFC_PN544_MEI can be selected. Signed-off-by: Jean Delvare Cc: Lauro Ramos Venancio Cc: Aloisio Almeida Jr Cc: Samuel Ortiz Signed-off-by: Samuel Ortiz

mei: bus: use mei_cldev_ prefix for the API functions

2015-09-21T02:31:10Z

Use mei_cldev_ prefix for all mei client bus api functions in order to resolve prefix conflict with functions that handle client function and are defined in client.c Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman

mei: bus: complete variable rename of type struct mei_cl_device

2015-09-21T02:31:09Z

In the commit 5c079ae11921 ("mei: bus: fix drivers and devices names confusion") we set the variables of type struct mei_cl_device to 'cldev' but few places were left out, namely mei_cl_bus.h header and the mei nfc drivers. Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman