kernel.git/drivers/net/wireless/rsi, branch linux-5.17.y

Merge branch 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

2022-01-17T03:49:30Z

Pull signal/exit/ptrace updates from Eric Biederman: "This set of changes deletes some dead code, makes a lot of cleanups which hopefully make the code easier to follow, and fixes bugs found along the way. The end-game which I have not yet reached yet is for fatal signals that generate coredumps to be short-circuit deliverable from complete_signal, for force_siginfo_to_task not to require changing userspace configured signal delivery state, and for the ptrace stops to always happen in locations where we can guarantee on all architectures that the all of the registers are saved and available on the stack. Removal of profile_task_ext, profile_munmap, and profile_handoff_task are the big successes for dead code removal this round. A bunch of small bug fixes are included, as most of the issues reported were small enough that they would not affect bisection so I simply added the fixes and did not fold the fixes into the changes they were fixing. There was a bug that broke coredumps piped to systemd-coredump. I dropped the change that caused that bug and replaced it entirely with something much more restrained. Unfortunately that required some rebasing. Some successes after this set of changes: There are few enough calls to do_exit to audit in a reasonable amount of time. The lifetime of struct kthread now matches the lifetime of struct task, and the pointer to struct kthread is no longer stored in set_child_tid. The flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is removed. Issues where task->exit_code was examined with signal->group_exit_code should been examined were fixed. There are several loosely related changes included because I am cleaning up and if I don't include them they will probably get lost. The original postings of these changes can be found at: https://lkml.kernel.org/r/87a6ha4zsd.fsf@email.froward.int.ebiederm.org https://lkml.kernel.org/r/87bl1kunjj.fsf@email.froward.int.ebiederm.org https://lkml.kernel.org/r/87r19opkx1.fsf_-_@email.froward.int.ebiederm.org I trimmed back the last set of changes to only the obviously correct once. Simply because there was less time for review than I had hoped" * 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits) ptrace/m68k: Stop open coding ptrace_report_syscall ptrace: Remove unused regs argument from ptrace_report_syscall ptrace: Remove second setting of PT_SEIZED in ptrace_attach taskstats: Cleanup the use of task->exit_code exit: Use the correct exit_code in /proc//stat exit: Fix the exit_code for wait_task_zombie exit: Coredumps reach do_group_exit exit: Remove profile_handoff_task exit: Remove profile_task_exit & profile_munmap signal: clean up kernel-doc comments signal: Remove the helper signal_group_exit signal: Rename group_exit_task group_exec_task coredump: Stop setting signal->group_exit_task signal: Remove SIGNAL_GROUP_COREDUMP signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process signal: Make coredump handling explicit in complete_signal signal: Have prepare_signal detect coredumps using signal->core_state signal: Have the oom killer detect coredumps using signal->core_state exit: Move force_uaccess back into do_exit exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit ...

rsi: fix array out of bound

2021-12-15T14:28:26Z

Limit the max of 'ii'. If 'ii' greater than or equal to 'RSI_MAX_VIFS', the array 'adapter->vifs' may be out of bound Signed-off-by: zhangyue Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20211208095341.47777-1-zhangyue1@kylinos.cn

exit: Rename complete_and_exit to kthread_complete_and_exit

2021-12-13T18:04:45Z

Update complete_and_exit to call kthread_exit instead of do_exit. Change the name to reflect this change in functionality. All of the users of complete_and_exit are causing the current kthread to exit so this change makes it clear what is happening. Move the implementation of kthread_complete_and_exit from kernel/exit.c to to kernel/kthread.c. As this function is kthread specific it makes most sense to live with the kthread functions. There are no functional change. Signed-off-by: "Eric W. Biederman"

rsi: Fix out-of-bounds read in rsi_read_pkt()

2021-11-29T10:43:54Z

rsi_get_* functions rely on an offset variable from usb input. The size of usb input is RSI_MAX_RX_USB_PKT_SIZE(3000), while 2-byte offset can be up to 0xFFFF. Thus a large offset can cause out-of-bounds read. The patch adds a bound checking condition when rcv_pkt_len is 0, indicating it's USB. It's unclear whether this is triggerable from other type of bus. The following check might help in that case. offset > rcv_pkt_len - FRAME_DESC_SZ The bug is trigerrable with conpromised/malfunctioning USB devices. I tested the patch with the crashing input and got no more bug report. Attached is the KASAN report from fuzzing. BUG: KASAN: slab-out-of-bounds in rsi_read_pkt+0x42e/0x500 [rsi_91x] Read of size 2 at addr ffff888019439fdb by task RX-Thread/227 CPU: 0 PID: 227 Comm: RX-Thread Not tainted 5.6.0 #66 Call Trace: dump_stack+0x76/0xa0 print_address_description.constprop.0+0x16/0x200 ? rsi_read_pkt+0x42e/0x500 [rsi_91x] ? rsi_read_pkt+0x42e/0x500 [rsi_91x] __kasan_report.cold+0x37/0x7c ? rsi_read_pkt+0x42e/0x500 [rsi_91x] kasan_report+0xe/0x20 rsi_read_pkt+0x42e/0x500 [rsi_91x] rsi_usb_rx_thread+0x1b1/0x2fc [rsi_usb] ? rsi_probe+0x16a0/0x16a0 [rsi_usb] ? _raw_spin_lock_irqsave+0x7b/0xd0 ? _raw_spin_trylock_bh+0x120/0x120 ? __wake_up_common+0x10b/0x520 ? rsi_probe+0x16a0/0x16a0 [rsi_usb] kthread+0x2b5/0x3b0 ? kthread_create_on_node+0xd0/0xd0 ret_from_fork+0x22/0x40 Reported-by: Brendan Dolan-Gavitt Signed-off-by: Zekun Shen Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/YXxXS4wgu2OsmlVv@10-18-43-117.dynapool.wireless.nyu.edu

rsi: Fix use-after-free in rsi_rx_done_handler()

2021-11-29T10:43:15Z

When freeing rx_cb->rx_skb, the pointer is not set to NULL, a later rsi_rx_done_handler call will try to read the freed address. This bug will very likley lead to double free, although detected early as use-after-free bug. The bug is triggerable with a compromised/malfunctional usb device. After applying the patch, the same input no longer triggers the use-after-free. Attached is the kasan report from fuzzing. BUG: KASAN: use-after-free in rsi_rx_done_handler+0x354/0x430 [rsi_usb] Read of size 4 at addr ffff8880188e5930 by task modprobe/231 Call Trace: dump_stack+0x76/0xa0 print_address_description.constprop.0+0x16/0x200 ? rsi_rx_done_handler+0x354/0x430 [rsi_usb] ? rsi_rx_done_handler+0x354/0x430 [rsi_usb] __kasan_report.cold+0x37/0x7c ? dma_direct_unmap_page+0x90/0x110 ? rsi_rx_done_handler+0x354/0x430 [rsi_usb] kasan_report+0xe/0x20 rsi_rx_done_handler+0x354/0x430 [rsi_usb] __usb_hcd_giveback_urb+0x1e4/0x380 usb_giveback_urb_bh+0x241/0x4f0 ? __usb_hcd_giveback_urb+0x380/0x380 ? apic_timer_interrupt+0xa/0x20 tasklet_action_common.isra.0+0x135/0x330 __do_softirq+0x18c/0x634 ? handle_irq_event+0xcd/0x157 ? handle_edge_irq+0x1eb/0x7b0 irq_exit+0x114/0x140 do_IRQ+0x91/0x1e0 common_interrupt+0xf/0xf Reported-by: Brendan Dolan-Gavitt Signed-off-by: Zekun Shen Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/YXxQL/vIiYcZUu/j@10-18-43-117.dynapool.wireless.nyu.edu

rsi: fix control-message timeout

2021-10-28T13:26:18Z

USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Use the common control-message timeout define for the five-second timeout. Fixes: dad0d04fa7ba ("rsi: Add RS9113 wireless driver") Cc: stable@vger.kernel.org # 3.15 Signed-off-by: Johan Hovold Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20211025120522.6045-5-johan@kernel.org

rsi: stop thread firstly in rsi_91x_init() error handling

2021-10-20T08:39:43Z

When fail to init coex module, free 'common' and 'adapter' directly, but common->tx_thread which will access 'common' and 'adapter' is running at the same time. That will trigger the UAF bug. ================================================================== BUG: KASAN: use-after-free in rsi_tx_scheduler_thread+0x50f/0x520 [rsi_91x] Read of size 8 at addr ffff8880076dc000 by task Tx-Thread/124777 CPU: 0 PID: 124777 Comm: Tx-Thread Not tainted 5.15.0-rc5+ #19 Call Trace: dump_stack_lvl+0xe2/0x152 print_address_description.constprop.0+0x21/0x140 ? rsi_tx_scheduler_thread+0x50f/0x520 kasan_report.cold+0x7f/0x11b ? rsi_tx_scheduler_thread+0x50f/0x520 rsi_tx_scheduler_thread+0x50f/0x520 ... Freed by task 111873: kasan_save_stack+0x1b/0x40 kasan_set_track+0x1c/0x30 kasan_set_free_info+0x20/0x30 __kasan_slab_free+0x109/0x140 kfree+0x117/0x4c0 rsi_91x_init+0x741/0x8a0 [rsi_91x] rsi_probe+0x9f/0x1750 [rsi_usb] Stop thread before free 'common' and 'adapter' to fix it. Fixes: 2108df3c4b18 ("rsi: add coex support") Signed-off-by: Ziyang Xuan Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20211015040335.1021546-1-william.xuanziyang@huawei.com

rsi: Fix module dev_oper_mode parameter description

2021-09-21T15:03:48Z

The module parameters are missing dev_oper_mode 12, BT classic alone, add it. Moreover, the parameters encode newlines, which ends up being printed malformed e.g. by modinfo, so fix that too. However, the module parameter string is duplicated in both USB and SDIO modules and the dev_oper_mode mode enumeration in those module parameters is a duplicate of macros used by the driver. Furthermore, the enumeration is confusing. So, deduplicate the module parameter string and use __stringify() to encode the correct mode enumeration values into the module parameter string. Finally, replace 'Wi-Fi' with 'Wi-Fi alone' and 'BT' with 'BT classic alone' to clarify what those modes really mean. Fixes: 898b255339310 ("rsi: add module parameter operating mode") Signed-off-by: Marek Vasut Cc: Amitkumar Karwar Cc: Angus Ainslie Cc: David S. Miller Cc: Jakub Kicinski Cc: Kalle Valo Cc: Karun Eagalapati Cc: Martin Fuzzey Cc: Martin Kepplinger Cc: Prameela Rani Garnepudi Cc: Sebastian Krzyszkowiak Cc: Siva Rebbagondla Cc: netdev@vger.kernel.org Cc: # 4.17+ Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20210916144245.10181-1-marex@denx.de

rsi: fix rate mask set leading to P2P failure

2021-09-21T05:42:37Z

P2P client mode was only working the first time. On subsequent connection attempts the group was successfully created but no data was sent (no transmitted data packets were seen with a sniffer). The reason for this was that the hardware was being configured in fixed rate mode with rate RSI_RATE_1 (1Mbps) which is not valid in the 5GHz band. In P2P mode wpa_supplicant uses NL80211_CMD_SET_TX_BITRATE_MASK to disallow the 11b rates in the 2.4GHz band which updated common->fixedrate_mask. rsi_set_min_rate() then used the fixedrate_mask to calculate the minimum allowed rate, or 0xffff = auto if none was found. However that calculation did not account for the different rate sets allowed in the different bands leading to the error. Fixing set_min_rate() would result in 6Mb/s being used all the time which is not what we want either. The reason the problem did not occur on the first connection is that rsi_mac80211_set_rate_mask() only updated the fixedrate_mask for the *current* band. When it was called that was still 2.4GHz as the switch is done later. So the when set_min_rate() was subsequently called after the switch to 5GHz it still had a mask of zero, leading to defaulting to auto mode. Fix this by differentiating the case of a single rate being requested, in which case the hardware will be used in fixed rate mode with just that rate, and multiple rates being requested, in which case we remain in auto mode but the firmware rate selection algorithm is configured with a restricted set of rates. Fixes: dad0d04fa7ba ("rsi: Add RS9113 wireless driver") Signed-off-by: Martin Fuzzey CC: stable@vger.kernel.org Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/1630337206-12410-4-git-send-email-martin.fuzzey@flowbird.group

rsi: fix key enabled check causing unwanted encryption for vap_id > 0

2021-09-21T05:42:37Z

My previous patch checked if encryption should be enabled by directly checking info->control.hw_key (like the downstream driver). However that missed that the control and driver_info members of struct ieee80211_tx_info are union fields. Due to this when rsi_core_xmit() updates fields in "tx_params" (driver_info) it can overwrite the control.hw_key, causing the result of the later test to be incorrect. With the current structure layout the first byte of control.hw_key is overlayed with the vap_id so, since we only test if control.hw_key is NULL / non NULL, a non zero vap_id will incorrectly enable encryption. In basic STA and AP modes the vap_id is always zero so it works but in P2P client mode a second VIF is created causing vap_id to be non zero and hence encryption to be enabled before keys have been set. Fix this by extracting the key presence flag to a new field in the driver private tx_params structure and populating it first. Fixes: 314538041b56 ("rsi: fix AP mode with WPA failure due to encrypted EAPOL") Signed-off-by: Martin Fuzzey CC: stable@vger.kernel.org Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/1630337206-12410-3-git-send-email-martin.fuzzey@flowbird.group