kernel.git/drivers/net/wireless/realtek, branch linux-4.7.y

rtl8xxxu: fix typo on variable name, compare against correct variable

2016-06-16T14:49:18Z

path_b_ok is being assigned but immediately after path_a_ok is being compared to the value 0x03. This appears to be a typo on the variable name, compare path_b_ok instead. Signed-off-by: Colin Ian King Signed-off-by: Jes Sorensen Signed-off-by: Kalle Valo

rtlwifi: Fix scheduling while atomic error from commit 49f86ec21c01

2016-05-27T17:53:39Z

Commit 49f86ec21c01 ("rtlwifi: Change long delays to sleeps") was correct for most cases; however, driver rtl8192ce calls the affected routines while in atomic context. The kernel bug output is as follows: BUG: scheduling while atomic: wpa_supplicant/627/0x00000002 [...] [] __schedule+0x899/0xad0 [] schedule+0x3c/0x90 [] schedule_hrtimeout_range_clock+0xa2/0x120 [] ? hrtimer_init+0x120/0x120 [] ? schedule_hrtimeout_range_clock+0x96/0x120 [] schedule_hrtimeout_range+0x13/0x20 [] usleep_range+0x4f/0x70 [] rtl_rfreg_delay+0x38/0x50 [rtlwifi] [] rtl92c_phy_config_rf_with_headerfile+0xc7/0xe0 [rtl8192ce] To fix this bug, three of the changes from delay to sleep are reverted. Unfortunately, one of the changes involves a delay of 50 msec. The calling code will be modified so that this long delay can be avoided; however, this change is being pushed now to fix the problem in kernel 4.6.0. Fixes: 49f86ec21c01 ("rtlwifi: Change long delays to sleeps") Reported-by: James Feeney Signed-off-by: Larry Finger Cc: James Feeney Cc: Stable [4.6+] Signed-off-by: Kalle Valo

Merge tag 'wireless-drivers-next-for-davem-2016-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

2016-05-20T23:40:35Z

Kalle Valo says: ==================== wireless-drivers patches for 4.7 Major changes: iwlwifi * remove IWLWIFI_DEBUG_EXPERIMENTAL_UCODE kconfig option * work for RX multiqueue continues * dynamic queue allocation work continues * add Luca as maintainer * a bunch of fixes and improvements all over brcmfmac * add 4356 sdio support ath6kl * add ability to set debug uart baud rate with a module parameter wil6210 * add debugfs file to configure firmware led functionality ==================== Signed-off-by: David S. Miller

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2016-05-18T00:05:30Z

Pull trivial tree updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (21 commits) gitignore: fix wording mfd: ab8500-debugfs: fix "between" in printk memstick: trivial fix of spelling mistake on management cpupowerutils: bench: fix "average" treewide: Fix typos in printk IB/mlx4: printk fix pinctrl: sirf/atlas7: fix printk spelling serial: mctrl_gpio: Grammar s/lines GPIOs/line GPIOs/, /sets/set/ w1: comment spelling s/minmum/minimum/ Blackfin: comment spelling s/divsor/divisor/ metag: Fix misspellings in comments. ia64: Fix misspellings in comments. hexagon: Fix misspellings in comments. tools/perf: Fix misspellings in comments. cris: Fix misspellings in comments. c6x: Fix misspellings in comments. blackfin: Fix misspelling of 'register' in comment. avr32: Fix misspelling of 'definitions' in comment. treewide: Fix typos in printk Doc: treewide : Fix typos in DocBook/filesystem.xml ...

rtlwifi: pci: use dev_kfree_skb_irq instead of kfree_skb in rtl_pci_reset_trx_ring

2016-05-11T18:59:04Z

We can't use kfree_skb in irq disable context, because spin_lock_irqsave make sure we are always in irq disable context, use dev_kfree_skb_irq instead of kfree_skb is better than dev_kfree_skb_any. This patch fix below kernel warning: [ 7612.095528] ------------[ cut here ]------------ [ 7612.095546] WARNING: CPU: 3 PID: 4460 at kernel/softirq.c:150 __local_bh_enable_ip+0x58/0x80() [ 7612.095550] Modules linked in: rtl8723be x86_pkg_temp_thermal btcoexist rtl_pci rtlwifi rtl8723_common [ 7612.095567] CPU: 3 PID: 4460 Comm: ifconfig Tainted: G W 4.4.0+ #4 [ 7612.095570] Hardware name: LENOVO 20DFA04FCD/20DFA04FCD, BIOS J5ET48WW (1.19 ) 08/27/2015 [ 7612.095574] 00000000 00000000 da37fc70 c12ce7c5 00000000 da37fca0 c104cc59 c19d4454 [ 7612.095584] 00000003 0000116c c19d4784 00000096 c10508a8 c10508a8 00000200 c1b42400 [ 7612.095594] f29be780 da37fcb0 c104ccad 00000009 00000000 da37fcbc c10508a8 f21f08b8 [ 7612.095604] Call Trace: [ 7612.095614] [] dump_stack+0x41/0x5c [ 7612.095620] [] warn_slowpath_common+0x89/0xc0 [ 7612.095628] [] ? __local_bh_enable_ip+0x58/0x80 [ 7612.095634] [] ? __local_bh_enable_ip+0x58/0x80 [ 7612.095640] [] warn_slowpath_null+0x1d/0x20 [ 7612.095646] [] __local_bh_enable_ip+0x58/0x80 [ 7612.095653] [] destroy_conntrack+0x64/0xa0 [ 7612.095660] [] nf_conntrack_destroy+0xf/0x20 [ 7612.095665] [] skb_release_head_state+0x55/0xa0 [ 7612.095670] [] skb_release_all+0xb/0x20 [ 7612.095674] [] __kfree_skb+0xb/0x60 [ 7612.095679] [] kfree_skb+0x30/0x70 [ 7612.095686] [] ? rtl_pci_reset_trx_ring+0x22d/0x370 [rtl_pci] [ 7612.095692] [] rtl_pci_reset_trx_ring+0x22d/0x370 [rtl_pci] [ 7612.095698] [] rtl_pci_start+0x19/0x190 [rtl_pci] [ 7612.095705] [] rtl_op_start+0x56/0x90 [rtlwifi] [ 7612.095712] [] drv_start+0x36/0xc0 [ 7612.095717] [] ieee80211_do_open+0x2d3/0x890 [ 7612.095725] [] ? call_netdevice_notifiers_info+0x2e/0x60 [ 7612.095730] [] ieee80211_open+0x4d/0x50 [ 7612.095736] [] __dev_open+0xa3/0x130 [ 7612.095742] [] ? _raw_spin_unlock_bh+0x13/0x20 [ 7612.095748] [] __dev_change_flags+0x89/0x140 [ 7612.095753] [] ? selinux_capable+0xd/0x10 [ 7612.095759] [] dev_change_flags+0x29/0x60 [ 7612.095765] [] devinet_ioctl+0x553/0x670 [ 7612.095772] [] ? _copy_to_user+0x28/0x40 [ 7612.095777] [] inet_ioctl+0x85/0xb0 [ 7612.095783] [] sock_ioctl+0x67/0x260 [ 7612.095788] [] ? sock_fasync+0x80/0x80 [ 7612.095795] [] do_vfs_ioctl+0x6b/0x550 [ 7612.095800] [] ? selinux_file_ioctl+0x102/0x1e0 [ 7612.095807] [] ? timekeeping_suspend+0x294/0x320 [ 7612.095813] [] ? __hrtimer_run_queues+0x14a/0x210 [ 7612.095820] [] ? security_file_ioctl+0x34/0x50 [ 7612.095827] [] SyS_ioctl+0x70/0x80 [ 7612.095832] [] do_fast_syscall_32+0x84/0x120 [ 7612.095839] [] sysenter_past_esp+0x36/0x55 [ 7612.095844] ---[ end trace 97e9c637a20e8348 ]--- Signed-off-by: Wang YanQing Cc: Stable Acked-by: Larry Finger Signed-off-by: Kalle Valo

rtlwifi: Remove double check for cnt_after_linked

2016-05-11T18:55:31Z

rtl_lps_enter does two successive check for cnt_after_linked to make sure some time has elapsed after linked. The second check isn't necessary, because if cnt_after_linked is bigger than 5, it is bigger than 2 of course! This patch remove the second check code. Signed-off-by: Wang YanQing Signed-off-by: Kalle Valo

rtlwifi: rtl818x: silence uninitialized variable warning

2016-05-11T18:51:45Z

What about if "rtlphy->pwrgroup_cnt" is 2? In that case we would use an uninitialized "chnlgroup" variable and probably crash. Maybe that can't happen for some reason which is not obvious but in that case this patch is harmless. Setting it to zero seems like a standard default in the surrounding code so it's probably fine here as well. Signed-off-by: Dan Carpenter Signed-off-by: Kalle Valo

rtlwifi: Fix logic error in enter/exit power-save mode

2016-05-11T18:44:07Z

In commit a269913c52ad ("rtlwifi: Rework rtl_lps_leave() and rtl_lps_enter() to use work queue"), the tests for enter/exit power-save mode were inverted. With this change applied, the wifi connection becomes much more stable. Fixes: a269913c52ad ("rtlwifi: Rework rtl_lps_leave() and rtl_lps_enter() to use work queue") Signed-off-by: Wang YanQing CC: Stable [3.10+] Acked-by: Larry Finger Signed-off-by: Kalle Valo

rtlwifi: rtl818x: constify rtl_intf_ops structures

2016-05-11T18:41:55Z

The rtl_intf_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall Signed-off-by: Kalle Valo

rtl8xxxu: Remove the now obsolete mbox_ext_reg info from rtl8xxxu_fileops

2016-05-03T10:07:24Z

With two different h2c_cmd() functions, mbox_ext_reg and mbox_ext_width are no longer needed. Signed-off-by: Jes Sorensen Signed-off-by: Kalle Valo