kernel.git/drivers/net/wireless/ralink, branch linux-6.7.y

wifi: rt2x00: correct wrong BBP register in RxDCOC calibration

2024-02-05T20:16:49Z

[ Upstream commit 50da74e1e8b682853d1e07fc8bbe3a0774ae5e09 ] Refer to Mediatek vendor driver RxDCOC_Calibration() function, when performing gainfreeze calibration, we should write register 140 instead of 141. This fix can reduce the total calibration time from 6 seconds to 1 second. Signed-off-by: Shiji Yang Acked-by: Stanislaw Gruszka Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/TYAP286MB0315B13B89DF57B6B27BB854BCAFA@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM Signed-off-by: Sasha Levin

wifi: rt2x00: restart beacon queue when hardware reset

2024-02-05T20:16:49Z

[ Upstream commit a11d965a218f0cd95b13fe44d0bcd8a20ce134a8 ] When a hardware reset is triggered, all registers are reset, so all queues are forced to stop in hardware interface. However, mac80211 will not automatically stop the queue. If we don't manually stop the beacon queue, the queue will be deadlocked and unable to start again. This patch fixes the issue where Apple devices cannot connect to the AP after calling ieee80211_restart_hw(). Signed-off-by: Shiji Yang Acked-by: Stanislaw Gruszka Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/TYAP286MB031530EB6D98DCE4DF20766CBCA4A@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM Signed-off-by: Sasha Levin

wifi: rt2x00: rework MT7620 PA/LNA RF calibration

2023-10-25T09:06:16Z

1. Move MT7620 PA/LNA calibration code to dedicated functions. 2. For external PA/LNA devices, restore RF and BBP registers before R-Calibration. 3. Do Rx DCOC calibration again before RXIQ calibration. 4. Add some missing LNA related registers' initialization. Signed-off-by: Shiji Yang Acked-by: Stanislaw Gruszka Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/TYAP286MB0315979F92DC563019B8F238BCD4A@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM

wifi: rt2x00: rework MT7620 channel config function

2023-10-25T09:06:15Z

1. Move the channel configuration code from rt2800_vco_calibration() to the rt2800_config_channel(). 2. Use MT7620 SoC specific AGC initial LNA value instead of the RT5592's value. 3. BBP{195,196} pairing write has been replaced with rt2800_bbp_glrt_write() to reduce redundant code. Signed-off-by: Shiji Yang Acked-by: Stanislaw Gruszka Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/TYAP286MB0315622A4340BFFA530B1B86BCD4A@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM

wifi: rt2x00: improve MT7620 register initialization

2023-10-25T09:06:15Z

1. Do not hard reset the BBP. We can use soft reset instead. This change has some help to the calibration failure issue. 2. Enable falling back to legacy rate from the HT/RTS rate by setting the HT_FBK_TO_LEGACY register. 3. Implement MCS rate specific maximum PSDU size. It can improve the transmission quality under the low RSSI condition. 4. Set BBP_84 register value to 0x19. This is used for extension channel overlapping IOT. Signed-off-by: Shiji Yang Acked-by: Stanislaw Gruszka Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/TYAP286MB031553CCD4B7A3B89C85935DBCD4A@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM

wifi: rt2x00: fix rt2800 watchdog function

2023-10-23T17:25:43Z

The watchdog function is broken on rt2800 series SoCs. This patch fixes the incorrect watchdog logic to make it work again. 1. Update current wdt queue index if it's not equal to the previous index. Watchdog compares the current and previous queue index to judge if the queue hung. 2. Make sure hung_{rx,tx} 'true' status won't be override by the normal queue. Any queue hangs should trigger a reset action. 3. Clear the watchdog counter of all queues before resetting the hardware. This change may help to avoid the reset loop. 4. Change hang check function return type to bool as we only need to return two status, yes or no. Signed-off-by: Shiji Yang Acked-by: Stanislaw Gruszka Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/TYAP286MB0315BC1D83D31154924F0D39BCD1A@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM

wifi: mac80211: rename ieee80211_tx_status() to ieee80211_tx_status_skb()

2023-10-23T10:26:51Z

make htmldocs warns: Documentation/driver-api/80211/mac80211:109: ./include/net/mac80211.h:5170: WARNING: Duplicate C declaration, also defined at mac80211:1117. Declaration is '.. c:function:: void ieee80211_tx_status (struct ieee80211_hw *hw, struct sk_buff *skb)'. This is because there's a function named ieee80211_tx_status() and a struct named ieee80211_tx_status. This has been discussed previously but no solution found: https://lore.kernel.org/all/20220521114629.6ee9fc06@coco.lan/ There's also a bug open for three years with no solution in sight: https://github.com/sphinx-doc/sphinx/pull/8313 So I guess we have no other solution than to a workaround this in the code, for example to rename the function to ieee80211_tx_status_skb() to avoid the name conflict. I got the idea for the name from ieee80211_tx_status_noskb() in which the skb is not provided as an argument, instead with ieee80211_tx_status_skb() the skb is provided. Compile tested only. Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20231012114229.2931808-2-kvalo@kernel.org Signed-off-by: Johannes Berg

wifi: rt2x00: fix MT7620 low RSSI issue

2023-10-03T11:42:18Z

On Mediatek vendor driver[1], MT7620 (RT6352) uses different RSSI base value '-2' compared to the other RT2x00 chips. This patch introduces the SoC specific base value to fix the low RSSI value reports on MT7620. [1] Found on MT76x2E_MT7620_LinuxAP_V3.0.4.0_P3 ConvertToRssi(). Signed-off-by: Shiji Yang Acked-by: Stanislaw Gruszka Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/TYAP286MB031571CDB146C414A908A66DBCFEA@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM

wifi: rt2x00: remove redundant check if u8 array element is less than zero

2023-09-28T16:24:30Z

The check on vga_gain[ch_idx] being less than zero is always false since vga_gain is a u8 array. Clean up the code by removing the check and the following assignment. Cleans up clang scan build warning: drivers/net/wireless/ralink/rt2x00/rt2800lib.c:9704:26: warning: result of comparison of unsigned expression < 0 is always false [-Wtautological-unsigned-zero-compare] Signed-off-by: Colin Ian King Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20230920121240.120455-1-colin.i.king@gmail.com

Fix nomenclature for USB and PCI wireless devices

2023-08-25T09:56:49Z

A mouse that uses a USB connection is called a "USB mouse" device (or "USB mouse" for short), not a "mouse USB" device. By analogy, a WiFi adapter that connects to the host computer via USB is a "USB wireless" device, not a "wireless USB" device. (The latter term more properly refers to a defunct Wireless USB specification, which described a technology for sending USB protocol messages over an ultra wideband radio link.) Similarly for a WiFi adapter card that plugs into a PCIe slot: It is a "PCIe wireless" device, not a "wireless PCIe" device. Rephrase the text in the kernel source where the word ordering is wrong. Signed-off-by: Alan Stern Reviewed-by: Greg Kroah-Hartman Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/57da7c80-0e48-41b5-8427-884a02648f55@rowland.harvard.edu