kernel.git/drivers/net/wireless/marvell, branch linux-5.14.y

libertas: Fix possible memory leak in probe and disconnect

2021-11-17T10:04:16Z

[ Upstream commit 9692151e2fe7a326bafe99836fd1f20a2cc3a049 ] I got memory leak as follows when doing fault injection test: unreferenced object 0xffff88812c7d7400 (size 512): comm "kworker/6:1", pid 176, jiffies 4295003332 (age 822.830s) hex dump (first 32 bytes): 00 68 1e 04 81 88 ff ff 01 00 00 00 00 00 00 00 .h.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [] slab_post_alloc_hook+0x9c/0x490 [] kmem_cache_alloc_trace+0x1f7/0x470 [] if_usb_probe+0x63/0x446 [usb8xxx] [] usb_probe_interface+0x1aa/0x3c0 [usbcore] [] really_probe+0x190/0x480 [] __driver_probe_device+0xf9/0x180 [] driver_probe_device+0x53/0x130 [] __device_attach_driver+0x105/0x130 [] bus_for_each_drv+0x129/0x190 [] __device_attach+0x1c9/0x270 [] device_initial_probe+0x20/0x30 [] bus_probe_device+0x142/0x160 [] device_add+0x829/0x1300 [] usb_set_configuration+0xb01/0xcc0 [usbcore] [] usb_generic_driver_probe+0x6e/0x90 [usbcore] [] usb_probe_device+0x6f/0x130 [usbcore] cardp is missing being freed in the error handling path of the probe and the path of the disconnect, which will cause memory leak. This patch adds the missing kfree(). Fixes: 876c9d3aeb98 ("[PATCH] Marvell Libertas 8388 802.11b/g USB driver") Reported-by: Hulk Robot Signed-off-by: Wang Hai Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20211020120345.2016045-3-wanghai38@huawei.com Signed-off-by: Sasha Levin

libertas_tf: Fix possible memory leak in probe and disconnect

2021-11-17T10:04:16Z

[ Upstream commit d549107305b4634c81223a853701c06bcf657bc3 ] I got memory leak as follows when doing fault injection test: unreferenced object 0xffff88810a2ddc00 (size 512): comm "kworker/6:1", pid 176, jiffies 4295009893 (age 757.220s) hex dump (first 32 bytes): 00 50 05 18 81 88 ff ff 00 00 00 00 00 00 00 00 .P.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [] slab_post_alloc_hook+0x9c/0x490 [] kmem_cache_alloc_trace+0x1f7/0x470 [] if_usb_probe+0x60/0x37c [libertas_tf_usb] [] usb_probe_interface+0x1aa/0x3c0 [usbcore] [] really_probe+0x190/0x480 [] __driver_probe_device+0xf9/0x180 [] driver_probe_device+0x53/0x130 [] __device_attach_driver+0x105/0x130 [] bus_for_each_drv+0x129/0x190 [] __device_attach+0x1c9/0x270 [] device_initial_probe+0x20/0x30 [] bus_probe_device+0x142/0x160 [] device_add+0x829/0x1300 [] usb_set_configuration+0xb01/0xcc0 [usbcore] [] usb_generic_driver_probe+0x6e/0x90 [usbcore] [] usb_probe_device+0x6f/0x130 [usbcore] cardp is missing being freed in the error handling path of the probe and the path of the disconnect, which will cause memory leak. This patch adds the missing kfree(). Fixes: c305a19a0d0a ("libertas_tf: usb specific functions") Reported-by: Hulk Robot Signed-off-by: Wang Hai Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20211020120345.2016045-2-wanghai38@huawei.com Signed-off-by: Sasha Levin

mwifiex: Send DELBA requests according to spec

2021-11-17T10:04:12Z

[ Upstream commit cc8a8bc37466f79b24d972555237f3d591150602 ] While looking at on-air packets using Wireshark, I noticed we're never setting the initiator bit when sending DELBA requests to the AP: While we set the bit on our del_ba_param_set bitmask, we forget to actually copy that bitmask over to the command struct, which means we never actually set the initiator bit. Fix that and copy the bitmask over to the host_cmd_ds_11n_delba command struct. Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Signed-off-by: Jonas Dreßler Acked-by: Pali Rohár Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20211016153244.24353-5-verdre@v0yd.nl Signed-off-by: Sasha Levin

mwl8k: Fix use-after-free in mwl8k_fw_state_machine()

2021-11-17T10:03:52Z

[ Upstream commit 257051a235c17e33782b6e24a4b17f2d7915aaec ] When the driver fails to request the firmware, it calls its error handler. In the error handler, the driver detaches device from driver first before releasing the firmware, which can cause a use-after-free bug. Fix this by releasing firmware first. The following log reveals it: [ 9.007301 ] BUG: KASAN: use-after-free in mwl8k_fw_state_machine+0x320/0xba0 [ 9.010143 ] Workqueue: events request_firmware_work_func [ 9.010830 ] Call Trace: [ 9.010830 ] dump_stack_lvl+0xa8/0xd1 [ 9.010830 ] print_address_description+0x87/0x3b0 [ 9.010830 ] kasan_report+0x172/0x1c0 [ 9.010830 ] ? mutex_unlock+0xd/0x10 [ 9.010830 ] ? mwl8k_fw_state_machine+0x320/0xba0 [ 9.010830 ] ? mwl8k_fw_state_machine+0x320/0xba0 [ 9.010830 ] __asan_report_load8_noabort+0x14/0x20 [ 9.010830 ] mwl8k_fw_state_machine+0x320/0xba0 [ 9.010830 ] ? mwl8k_load_firmware+0x5f0/0x5f0 [ 9.010830 ] request_firmware_work_func+0x172/0x250 [ 9.010830 ] ? read_lock_is_recursive+0x20/0x20 [ 9.010830 ] ? process_one_work+0x7a1/0x1100 [ 9.010830 ] ? request_firmware_nowait+0x460/0x460 [ 9.010830 ] ? __this_cpu_preempt_check+0x13/0x20 [ 9.010830 ] process_one_work+0x9bb/0x1100 Signed-off-by: Zheyu Ma Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/1634356979-6211-1-git-send-email-zheyuma97@gmail.com Signed-off-by: Sasha Levin

mwifiex: Properly initialize private structure on interface type changes

2021-11-17T10:03:45Z

[ Upstream commit c606008b70627a2fc485732a53cc22f0f66d0981 ] When creating a new virtual interface in mwifiex_add_virtual_intf(), we update our internal driver states like bss_type, bss_priority, bss_role and bss_mode to reflect the mode the firmware will be set to. When switching virtual interface mode using mwifiex_init_new_priv_params() though, we currently only update bss_mode and bss_role. In order for the interface mode switch to actually work, we also need to update bss_type to its proper value, so do that. This fixes a crash of the firmware (because the driver tries to execute commands that are invalid in AP mode) when switching from station mode to AP mode. Signed-off-by: Jonas Dreßler Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20210914195909.36035-9-verdre@v0yd.nl Signed-off-by: Sasha Levin

mwifiex: Run SET_BSS_MODE when changing from P2P to STATION vif-type

2021-11-17T10:03:45Z

[ Upstream commit c2e9666cdffd347460a2b17988db4cfaf2a68fb9 ] We currently handle changing from the P2P to the STATION virtual interface type slightly different than changing from P2P to ADHOC: When changing to STATION, we don't send the SET_BSS_MODE command. We do send that command on all other type-changes though, and it probably makes sense to send the command since after all we just changed our BSS_MODE. Looking at prior changes to this part of the code, it seems that this is simply a leftover from old refactorings. Since sending the SET_BSS_MODE command is the only difference between mwifiex_change_vif_to_sta_adhoc() and the current code, we can now use mwifiex_change_vif_to_sta_adhoc() for both switching to ADHOC and STATION interface type. This does not fix any particular bug and just "looked right", so there's a small chance it might be a regression. Signed-off-by: Jonas Dreßler Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20210914195909.36035-4-verdre@v0yd.nl Signed-off-by: Sasha Levin

mwifiex: Try waking the firmware until we get an interrupt

2021-11-17T10:03:35Z

commit 8e3e59c31fea5de95ffc52c46f0c562c39f20c59 upstream. It seems that the PCIe+USB firmware (latest version 15.68.19.p21) of the 88W8897 card sometimes ignores or misses when we try to wake it up by writing to the firmware status register. This leads to the firmware wakeup timeout expiring and the driver resetting the card because we assume the firmware has hung up or crashed. Turns out that the firmware actually didn't hang up, but simply "missed" our wakeup request and didn't send us an interrupt with an AWAKE event. Trying again to read the firmware status register after a short timeout usually makes the firmware wake up as expected, so add a small retry loop to mwifiex_pm_wakeup_card() that looks at the interrupt status to check whether the card woke up. The number of tries and timeout lengths for this were determined experimentally: The firmware usually takes about 500 us to wake up after we attempt to read the status register. In some cases where the firmware is very busy (for example while doing a bluetooth scan) it might even miss our requests for multiple milliseconds, which is why after 15 tries the waiting time gets increased to 10 ms. The maximum number of tries it took to wake the firmware when testing this was around 20, so a maximum number of 50 tries should give us plenty of safety margin. Here's a reproducer for those firmware wakeup failures I've found: 1) Make sure wifi powersaving is enabled (iw dev wlp1s0 set power_save on) 2) Connect to any wifi network (makes firmware go into wifi powersaving mode, not deep sleep) 3) Make sure bluetooth is turned off (to ensure the firmware actually enters powersave mode and doesn't keep the radio active doing bluetooth stuff) 4) To confirm that wifi powersaving is entered ping a device on the LAN, pings should be a few ms higher than without powersaving 5) Run "while true; do iwconfig; sleep 0.0001; done", this wakes and suspends the firmware extremely often 6) Wait until things explode, for me it consistently takes <5 minutes BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=109681 Cc: stable@vger.kernel.org Signed-off-by: Jonas Dreßler Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20211011133224.15561-3-verdre@v0yd.nl Signed-off-by: Greg Kroah-Hartman

mwifiex: Read a PCI register after writing the TX ring write pointer

2021-11-17T10:03:35Z

commit e5f4eb8223aa740237cd463246a7debcddf4eda1 upstream. On the 88W8897 PCIe+USB card the firmware randomly crashes after setting the TX ring write pointer. The issue is present in the latest firmware version 15.68.19.p21 of the PCIe+USB card. Those firmware crashes can be worked around by reading any PCI register of the card after setting that register, so read the PCI_VENDOR_ID register here. The reason this works is probably because we keep the bus from entering an ASPM state for a bit longer, because that's what causes the cards firmware to crash. This fixes a bug where during RX/TX traffic and with ASPM L1 substates enabled (the specific substates where the issue happens appear to be platform dependent), the firmware crashes and eventually a command timeout appears in the logs. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=109681 Cc: stable@vger.kernel.org Signed-off-by: Jonas Dreßler Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20211011133224.15561-2-verdre@v0yd.nl Signed-off-by: Greg Kroah-Hartman

mwifiex: fix division by zero in fw download path

2021-11-17T10:03:33Z

commit 89f8765a11d8df49296d92c404067f9b5c58ee26 upstream. Add the missing endpoint sanity checks to probe() to avoid division by zero in mwifiex_write_data_sync() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Only add checks for the firmware-download boot stage, which require both command endpoints, for now. The driver looks like it will handle a missing endpoint during normal operation without oopsing, albeit not very gracefully as it will try to submit URBs to the default pipe and fail. Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Fixes: 4daffe354366 ("mwifiex: add support for Marvell USB8797 chipset") Cc: stable@vger.kernel.org # 3.5 Cc: Amitkumar Karwar Signed-off-by: Johan Hovold Reviewed-by: Brian Norris Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20211027080819.6675-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman

Merge tag 'asm-generic-unaligned-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

2021-07-02T19:43:40Z

Pull asm/unaligned.h unification from Arnd Bergmann: "Unify asm/unaligned.h around struct helper The get_unaligned()/put_unaligned() helpers are traditionally architecture specific, with the two main variants being the "access-ok.h" version that assumes unaligned pointer accesses always work on a particular architecture, and the "le-struct.h" version that casts the data to a byte aligned type before dereferencing, for architectures that cannot always do unaligned accesses in hardware. Based on the discussion linked below, it appears that the access-ok version is not realiable on any architecture, but the struct version probably has no downsides. This series changes the code to use the same implementation on all architectures, addressing the few exceptions separately" Link: https://lore.kernel.org/lkml/75d07691-1e4f-741f-9852-38c0b4f520bc@synopsys.com/ Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100363 Link: https://lore.kernel.org/lkml/20210507220813.365382-14-arnd@kernel.org/ Link: git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git unaligned-rework-v2 Link: https://lore.kernel.org/lkml/CAHk-=whGObOKruA_bU3aPGZfoDqZM1_9wBkwREp0H0FgR-90uQ@mail.gmail.com/ * tag 'asm-generic-unaligned-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic: simplify asm/unaligned.h asm-generic: uaccess: 1-byte access is always aligned netpoll: avoid put_unaligned() on single character mwifiex: re-fix for unaligned accesses apparmor: use get_unaligned() only for multi-byte words partitions: msdos: fix one-byte get_unaligned() asm-generic: unaligned always use struct helpers asm-generic: unaligned: remove byteshift helpers powerpc: use linux/unaligned/le_struct.h on LE power7 m68k: select CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS sh: remove unaligned access for sh4a openrisc: always use unaligned-struct header asm-generic: use asm-generic/unaligned.h for most architectures