kernel.git/drivers/net/wireless/b43, branch linux-4.4.y

b43: fix a lower bounds test

2021-11-26T10:58:39Z

[ Upstream commit 9b793db5fca44d01f72d3564a168171acf7c4076 ] The problem is that "channel" is an unsigned int, when it's less 5 the value of "channel - 5" is not a negative number as one would expect but is very high positive value instead. This means that "start" becomes a very high positive value. The result of that is that we never enter the "for (i = start; i <= end; i++) {" loop. Instead of storing the result from b43legacy_radio_aci_detect() it just uses zero. Fixes: ef1a628d83fc ("b43: Implement dynamic PHY API") Signed-off-by: Dan Carpenter Acked-by: Michael Büsch Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20211006073621.GE8404@kili Signed-off-by: Sasha Levin

b43: N-PHY: Fix the update of coef for the PHY revision >= 3case

2021-03-03T15:44:16Z

[ Upstream commit 4773acf3d4b50768bf08e9e97a204819e9ea0895 ] The documentation for the PHY update [1] states: Loop 4 times with index i If PHY Revision >= 3 Copy table[i] to coef[i] Otherwise Set coef[i] to 0 the copy of the table to coef is currently implemented the wrong way around, table is being updated from uninitialized values in coeff. Fix this by swapping the assignment around. [1] https://bcm-v4.sipsolutions.net/802.11/PHY/N/RestoreCal/ Fixes: 2f258b74d13c ("b43: N-PHY: implement restoring general configuration") Addresses-Coverity: ("Uninitialized scalar variable") Signed-off-by: Colin Ian King Acked-by: Larry Finger Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

b43: Fix connection problem with WPA3

2020-06-20T08:23:23Z

commit 75d057bda1fbca6ade21378aa45db712e5f7d962 upstream. Since the driver was first introduced into the kernel, it has only handled the ciphers associated with WEP, WPA, and WPA2. It fails with WPA3 even though mac80211 can handle those additional ciphers in software, b43 did not report that it could handle them. By setting MFP_CAPABLE using ieee80211_set_hw(), the problem is fixed. With this change, b43 will handle the ciphers it knows in hardware, and let mac80211 handle the others in software. It is not necessary to use the module parameter NOHWCRYPT to turn hardware encryption off. Although this change essentially eliminates that module parameter, I am choosing to keep it for cases where the hardware is broken, and software encryption is required for all ciphers. Reported-and-tested-by: Rui Salvaterra Signed-off-by: Larry Finger Cc: Stable Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20200526155909.5807-2-Larry.Finger@lwfinger.net Signed-off-by: Greg Kroah-Hartman

b43: shut up clang -Wuninitialized variable warning

2019-06-11T10:24:02Z

[ Upstream commit d825db346270dbceef83b7b750dbc29f1d7dcc0e ] Clang warns about what is clearly a case of passing an uninitalized variable into a static function: drivers/net/wireless/broadcom/b43/phy_lp.c:1852:23: error: variable 'gains' is uninitialized when used here [-Werror,-Wuninitialized] lpphy_papd_cal(dev, gains, 0, 1, 30); ^~~~~ drivers/net/wireless/broadcom/b43/phy_lp.c:1838:2: note: variable 'gains' is declared here struct lpphy_tx_gains gains, oldgains; ^ 1 error generated. However, this function is empty, and its arguments are never evaluated, so gcc in contrast does not warn here. Both compilers behave in a reasonable way as far as I can tell, so we should change the code to avoid the warning everywhere. We could just eliminate the lpphy_papd_cal() function entirely, given that it has had the TODO comment in it for 10 years now and is rather unlikely to ever get done. I'm doing a simpler change here, and just pass the 'oldgains' variable in that has been initialized, based on the guess that this is what was originally meant. Fixes: 2c0d6100da3e ("b43: LP-PHY: Begin implementing calibration & software RFKILL support") Signed-off-by: Arnd Bergmann Acked-by: Larry Finger Reviewed-by: Nathan Chancellor Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin

b43: Fix error in cordic routine

2019-01-13T09:05:33Z

commit 8ea3819c0bbef57a51d8abe579e211033e861677 upstream. The cordic routine for calculating sines and cosines that was added in commit 6f98e62a9f1b ("b43: update cordic code to match current specs") contains an error whereby a quantity declared u32 can in fact go negative. This problem was detected by Priit Laes who is switching b43 to use the routine in the library functions of the kernel. Fixes: 986504540306 ("b43: make cordic common (LP-PHY and N-PHY need it)") Reported-by: Priit Laes Cc: Rafał Miłecki Cc: Stable # 2.6.34 Signed-off-by: Larry Finger Signed-off-by: Priit Laes Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman

Merge tag 'driver-core-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2015-11-05T05:50:37Z

Pull driver core updates from Greg KH: "Here's the "big" driver core updates for 4.4-rc1. Primarily a bunch of debugfs updates, with a smattering of minor driver core fixes and updates as well. All have been in linux-next for a long time" * tag 'driver-core-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: debugfs: Add debugfs_create_ulong() of: to support binding numa node to specified device in devicetree debugfs: Add read-only/write-only bool file ops debugfs: Add read-only/write-only size_t file ops debugfs: Add read-only/write-only x64 file ops debugfs: Consolidate file mode checks in debugfs_create_*() Revert "mm: Check if section present during memory block (un)registering" driver-core: platform: Provide helpers for multi-driver modules mm: Check if section present during memory block (un)registering devres: fix a for loop bounds check CMA: fix CONFIG_CMA_SIZE_MBYTES overflow in 64bit base/platform: assert that dev_pm_domain callbacks are called unconditionally sysfs: correctly handle short reads on PREALLOC attrs. base: soc: siplify ida usage kobject: move EXPORT_SYMBOL() macros next to corresponding definitions kobject: explain what kobject's sd field is debugfs: document that debugfs_remove*() accepts NULL and error values debugfs: Pass bool pointer to debugfs_create_bool() ACPI / EC: Fix broken 64bit big-endian users of 'global_lock'

ssb: pick PCMCIA host code support from b43 driver

2015-10-28T19:04:04Z

ssb bus can be found on various "host" devices like PCI/PCMCIA/SDIO. Every ssb bus contains cores AKA devices. The main idea is to have ssb driver scan/initialize bus and register ready-to-use cores. This way ssb drivers can operate on a single core mostly ignoring underlaying details. For some reason PCMCIA support was split between ssb and b43. We got PCMCIA host device probing in b43, then bus scanning in ssb and then wireless core probing back in b43. The truth is it's very unlikely we will ever see PCMCIA ssb device with no 802.11 core but I still don't see any advantage of the current architecture. With proposed change we get the same functionality with a simpler architecture, less Kconfig symbols, one killed EXPORT and hopefully cleaner b43. Since b43 supports both: ssb & bcma I prefer to keep ssb specific code in ssb driver. This mostly moves code from b43's pcmcia.c to bridge_pcmcia_80211.c. We already use similar solution with b43_pci_bridge.c. I didn't use "b43" in name of this new file as in theory any driver can operate on wireless core. Signed-off-by: Rafał Miłecki Signed-off-by: Kalle Valo

debugfs: Pass bool pointer to debugfs_create_bool()

2015-10-04T10:36:07Z

Its a bit odd that debugfs_create_bool() takes 'u32 *' as an argument, when all it needs is a boolean pointer. It would be better to update this API to make it accept 'bool *' instead, as that will make it more consistent and often more convenient. Over that bool takes just a byte. That required updates to all user sites as well, in the same commit updating the API. regmap core was also using debugfs_{read|write}_file_bool(), directly and variable types were updated for that to be bool as well. Signed-off-by: Viresh Kumar Acked-by: Mark Brown Acked-by: Charles Keepax Signed-off-by: Greg Kroah-Hartman

b43: probe bcma core (device) rev 0x15

2015-09-26T17:37:36Z

OpenWrt user reported b43 doesn't probe wireless core on SoC BCM5356A1: [ 0.000000] bcma: bus0: Found chip with id 0x5356, rev 0x01 and package 0x04 it is because this chip uses different 802.11 core revison than others: [ 0.000000] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x15, class 0x0) Signed-off-by: Rafał Miłecki Signed-off-by: Kalle Valo

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2015-08-13T23:23:11Z

Conflicts: drivers/net/ethernet/cavium/Kconfig The cavium conflict was overlapping dependency changes. Signed-off-by: David S. Miller