kernel.git/drivers/net/wireless/b43, branch linux-3.17.y

b43: N-PHY: fix "Data bus error" while working in 5 GHz

2014-07-31T17:45:31Z

When switching from one 5 GHz channel to another 5 GHz channel we need to make sure BPHY is still in a reset. However to access BPHY register we have to switch to 2 GHz mode for a moment. Otherwise this may result in "Data bus error" (noticed by Hauke with BCM43224 connected to the SoC). Reported-by: Hauke Mehrtens Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville

b43: update PHY descriptions in Kconfig

2014-07-31T17:45:30Z

Add lists of chipsets, so people can enable support for their device easier (at least after checking lspci). Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville

b43: add support for BCM43131 chipset with N-PHY rev 17

2014-07-29T14:32:57Z

It contains radio 0x2057 rev 14 just like a BCM43217, so it doesn't require any magic. The main difference is that BCM4313 is 1x1:1. Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville

b43: enable 5 GHz support for N-PHY devices

2014-07-23T17:08:36Z

This has been tested on 14e4:4328 (BCM4321), 14e4:432b (BCM4322), 14e4:4353 (BCM43224) and 14e4:4359 (BCM43228) which is an almost complete list of 5 GHz capable device (only BCM43222 is missing). Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville

b43: register limited amount of 5G channels for BCM43228

2014-07-23T17:08:36Z

We don't have all needed channel tables due to RE process for this device. Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville

b43: N-PHY: don't calculate values for TSSI if we can't transmit

2014-07-23T17:08:36Z

This process requires sending some sample tone, so make sure we're allowed to transmit first. Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville

b43: report correct rate to mac80211 for 5 GHz packets

2014-07-23T17:08:35Z

So far we were assuming only A-PHY supports 5 GHz. Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville

b43: N-PHY: fix rev7+ typos at random places

2014-07-23T17:08:35Z

Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville

b43: extract one more radio parameter: version

2014-07-22T17:53:18Z

Some radios may share the same ID and revision but differ by a version. E.g. radio in BCM5357B0 is version 1 and requires specific handling. Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville

b43: enable radio 0x2057 rev 14 support (AKA BCM43217)

2014-07-22T17:53:18Z

Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville