kernel.git/drivers/net/vxlan.c, branch linux-4.19.y

vxlan: Fix regression when dropping packets due to invalid src addresses

2024-07-05T07:00:20Z

[ Upstream commit 1cd4bc987abb2823836cbb8f887026011ccddc8a ] Commit f58f45c1e5b9 ("vxlan: drop packets from invalid src-address") has recently been added to vxlan mainly in the context of source address snooping/learning so that when it is enabled, an entry in the FDB is not being created for an invalid address for the corresponding tunnel endpoint. Before commit f58f45c1e5b9 vxlan was similarly behaving as geneve in that it passed through whichever macs were set in the L2 header. It turns out that this change in behavior breaks setups, for example, Cilium with netkit in L3 mode for Pods as well as tunnel mode has been passing before the change in f58f45c1e5b9 for both vxlan and geneve. After mentioned change it is only passing for geneve as in case of vxlan packets are dropped due to vxlan_set_mac() returning false as source and destination macs are zero which for E/W traffic via tunnel is totally fine. Fix it by only opting into the is_valid_ether_addr() check in vxlan_set_mac() when in fact source address snooping/learning is actually enabled in vxlan. This is done by moving the check into vxlan_snoop(). With this change, the Cilium connectivity test suite passes again for both tunnel flavors. Fixes: f58f45c1e5b9 ("vxlan: drop packets from invalid src-address") Signed-off-by: Daniel Borkmann Cc: David Bauer Cc: Ido Schimmel Cc: Nikolay Aleksandrov Cc: Martin KaFai Lau Reviewed-by: Ido Schimmel Reviewed-by: Nikolay Aleksandrov Reviewed-by: David Bauer Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

vxlan: Fix regression when dropping packets due to invalid src addresses

2024-06-16T11:23:38Z

commit 1cd4bc987abb2823836cbb8f887026011ccddc8a upstream. Commit f58f45c1e5b9 ("vxlan: drop packets from invalid src-address") has recently been added to vxlan mainly in the context of source address snooping/learning so that when it is enabled, an entry in the FDB is not being created for an invalid address for the corresponding tunnel endpoint. Before commit f58f45c1e5b9 vxlan was similarly behaving as geneve in that it passed through whichever macs were set in the L2 header. It turns out that this change in behavior breaks setups, for example, Cilium with netkit in L3 mode for Pods as well as tunnel mode has been passing before the change in f58f45c1e5b9 for both vxlan and geneve. After mentioned change it is only passing for geneve as in case of vxlan packets are dropped due to vxlan_set_mac() returning false as source and destination macs are zero which for E/W traffic via tunnel is totally fine. Fix it by only opting into the is_valid_ether_addr() check in vxlan_set_mac() when in fact source address snooping/learning is actually enabled in vxlan. This is done by moving the check into vxlan_snoop(). With this change, the Cilium connectivity test suite passes again for both tunnel flavors. Fixes: f58f45c1e5b9 ("vxlan: drop packets from invalid src-address") Signed-off-by: Daniel Borkmann Cc: David Bauer Cc: Ido Schimmel Cc: Nikolay Aleksandrov Cc: Martin KaFai Lau Reviewed-by: Ido Schimmel Reviewed-by: Nikolay Aleksandrov Reviewed-by: David Bauer Signed-off-by: David S. Miller [ Backport note: vxlan snooping/learning not supported in 6.8 or older, so commit is simply a revert. ] Signed-off-by: Daniel Borkmann Signed-off-by: Greg Kroah-Hartman

vxlan: drop packets from invalid src-address

2024-05-02T14:17:11Z

[ Upstream commit f58f45c1e5b92975e91754f5407250085a6ae7cf ] The VXLAN driver currently does not check if the inner layer2 source-address is valid. In case source-address snooping/learning is enabled, a entry in the FDB for the invalid address is created with the layer3 address of the tunnel endpoint. If the frame happens to have a non-unicast address set, all this non-unicast traffic is subsequently not flooded to the tunnel network but sent to the learnt host in the FDB. To make matters worse, this FDB entry does not expire. Apply the same filtering for packets as it is done for bridges. This not only drops these invalid packets but avoids them from being learnt into the FDB. Fixes: d342894c5d2f ("vxlan: virtual extensible lan") Suggested-by: Ido Schimmel Signed-off-by: David Bauer Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

vxlan: generalize vxlan_parse_gpe_hdr and remove unused args

2023-09-23T08:47:57Z

[ Upstream commit 17a0a64448b568442a101de09575f81ffdc45d15 ] The vxlan_parse_gpe_hdr function extracts the next protocol value from the GPE header and marks GPE bits as parsed. In order to be used in the next patch, split the function into protocol extraction and bit marking. The bit marking is meaningful only in vxlan_rcv; move it directly there. Rename the function to vxlan_parse_gpe_proto to reflect what it now does. Remove unused arguments skb and vxflags. Move the function earlier in the file to allow it to be called from more places in the next patch. Signed-off-by: Jiri Benc Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

vxlan: fix error return code in vxlan_fdb_append

2022-04-27T11:39:43Z

[ Upstream commit 7cea5560bf656b84f9ed01c0cc829d4eecd0640b ] When kmalloc and dst_cache_init failed, should return ENOMEM rather than ENOBUFS. Signed-off-by: Hongbin Wang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

vxlan: add missing rcu_read_lock() in neigh_reduce()

2021-07-20T14:15:51Z

[ Upstream commit 85e8b032d6ebb0f698a34dd22c2f13443d905888 ] syzbot complained in neigh_reduce(), because rcu_read_lock_bh() is treated differently than rcu_read_lock() WARNING: suspicious RCU usage 5.13.0-rc6-syzkaller #0 Not tainted ----------------------------- include/net/addrconf.h:313 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by kworker/0:0/5: #0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: arch_atomic64_set arch/x86/include/asm/atomic64_64.h:34 [inline] #0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: atomic64_set include/asm-generic/atomic-instrumented.h:856 [inline] #0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: atomic_long_set include/asm-generic/atomic-long.h:41 [inline] #0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: set_work_data kernel/workqueue.c:617 [inline] #0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: set_work_pool_and_clear_pending kernel/workqueue.c:644 [inline] #0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x871/0x1600 kernel/workqueue.c:2247 #1: ffffc90000ca7da8 ((work_completion)(&port->wq)){+.+.}-{0:0}, at: process_one_work+0x8a5/0x1600 kernel/workqueue.c:2251 #2: ffffffff8bf795c0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1da/0x3130 net/core/dev.c:4180 stack backtrace: CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.13.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events ipvlan_process_multicast Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x141/0x1d7 lib/dump_stack.c:120 __in6_dev_get include/net/addrconf.h:313 [inline] __in6_dev_get include/net/addrconf.h:311 [inline] neigh_reduce drivers/net/vxlan.c:2167 [inline] vxlan_xmit+0x34d5/0x4c30 drivers/net/vxlan.c:2919 __netdev_start_xmit include/linux/netdevice.h:4944 [inline] netdev_start_xmit include/linux/netdevice.h:4958 [inline] xmit_one net/core/dev.c:3654 [inline] dev_hard_start_xmit+0x1eb/0x920 net/core/dev.c:3670 __dev_queue_xmit+0x2133/0x3130 net/core/dev.c:4246 ipvlan_process_multicast+0xa99/0xd70 drivers/net/ipvlan/ipvlan_core.c:287 process_one_work+0x98d/0x1600 kernel/workqueue.c:2276 worker_thread+0x64c/0x1120 kernel/workqueue.c:2422 kthread+0x3b1/0x4a0 kernel/kthread.c:313 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 Fixes: f564f45c4518 ("vxlan: add ipv6 proxy support") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

vxlan: move debug check after netdev unregister

2021-03-04T08:39:49Z

[ Upstream commit 92584ddf550ae72d492858c19d1f9025e07a9350 ] The debug check must be done after unregister_netdevice_many() call -- the hlist_del_rcu() for this is done inside .ndo_stop. This is the same with commit 0fda7600c2e1 ("geneve: move debug check after netdev unregister") Test commands: ip netns del A ip netns add A ip netns add B ip netns exec B ip link add vxlan0 type vxlan vni 100 local 10.0.0.1 \ remote 10.0.0.2 dstport 4789 srcport 4789 4789 ip netns exec B ip link set vxlan0 netns A ip netns exec A ip link set vxlan0 up ip netns del B Splat looks like: [ 73.176249][ T7] ------------[ cut here ]------------ [ 73.178662][ T7] WARNING: CPU: 4 PID: 7 at drivers/net/vxlan.c:4743 vxlan_exit_batch_net+0x52e/0x720 [vxlan] [ 73.182597][ T7] Modules linked in: vxlan openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 mlx5_core nfp mlxfw ixgbevf tls sch_fq_codel nf_tables nfnetlink ip_tables x_tables unix [ 73.190113][ T7] CPU: 4 PID: 7 Comm: kworker/u16:0 Not tainted 5.11.0-rc7+ #838 [ 73.193037][ T7] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 73.196986][ T7] Workqueue: netns cleanup_net [ 73.198946][ T7] RIP: 0010:vxlan_exit_batch_net+0x52e/0x720 [vxlan] [ 73.201509][ T7] Code: 00 01 00 00 0f 84 39 fd ff ff 48 89 ca 48 c1 ea 03 80 3c 1a 00 0f 85 a6 00 00 00 89 c2 48 83 c2 02 49 8b 14 d4 48 85 d2 74 ce <0f> 0b eb ca e8 b9 51 db dd 84 c0 0f 85 4a fe ff ff 48 c7 c2 80 bc [ 73.208813][ T7] RSP: 0018:ffff888100907c10 EFLAGS: 00010286 [ 73.211027][ T7] RAX: 000000000000003c RBX: dffffc0000000000 RCX: ffff88800ec411f0 [ 73.213702][ T7] RDX: ffff88800a278000 RSI: ffff88800fc78c70 RDI: ffff88800fc78070 [ 73.216169][ T7] RBP: ffff88800b5cbdc0 R08: fffffbfff424de61 R09: fffffbfff424de61 [ 73.218463][ T7] R10: ffffffffa126f307 R11: fffffbfff424de60 R12: ffff88800ec41000 [ 73.220794][ T7] R13: ffff888100907d08 R14: ffff888100907c50 R15: ffff88800fc78c40 [ 73.223337][ T7] FS: 0000000000000000(0000) GS:ffff888114800000(0000) knlGS:0000000000000000 [ 73.225814][ T7] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 73.227616][ T7] CR2: 0000562b5cb4f4d0 CR3: 0000000105fbe001 CR4: 00000000003706e0 [ 73.229700][ T7] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 73.231820][ T7] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 73.233844][ T7] Call Trace: [ 73.234698][ T7] ? vxlan_err_lookup+0x3c0/0x3c0 [vxlan] [ 73.235962][ T7] ? ops_exit_list.isra.11+0x93/0x140 [ 73.237134][ T7] cleanup_net+0x45e/0x8a0 [ ... ] Fixes: 57b61127ab7d ("vxlan: speedup vxlan tunnels dismantle") Signed-off-by: Taehee Yoo Link: https://lore.kernel.org/r/20210221154552.11749-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

vxlan: Copy needed_tailroom from lowerdev

2020-12-30T10:25:46Z

[ Upstream commit a5e74021e84bb5eadf760aaf2c583304f02269be ] While vxlan doesn't need any extra tailroom, the lowerdev might need it. In that case, copy it over to reduce the chance for additional (re)allocations in the transmit path. Signed-off-by: Sven Eckelmann Link: https://lore.kernel.org/r/20201126125247.1047977-2-sven@narfation.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

vxlan: Add needed_headroom for lower device

2020-12-30T10:25:46Z

[ Upstream commit 0a35dc41fea67ac4495ce7584406bf9557a6e7d0 ] It was observed that sending data via batadv over vxlan (on top of wireguard) reduced the performance massively compared to raw ethernet or batadv on raw ethernet. A check of perf data showed that the vxlan_build_skb was calling all the time pskb_expand_head to allocate enough headroom for: min_headroom = LL_RESERVED_SPACE(dst->dev) + dst->header_len + VXLAN_HLEN + iphdr_len; But the vxlan_config_apply only requested needed headroom for: lowerdev->hard_header_len + VXLAN6_HEADROOM or VXLAN_HEADROOM So it completely ignored the needed_headroom of the lower device. The first caller of net_dev_xmit could therefore never make sure that enough headroom was allocated for the rest of the transmit path. Cc: Annika Wickert Signed-off-by: Sven Eckelmann Tested-by: Annika Wickert Link: https://lore.kernel.org/r/20201126125247.1047977-1-sven@narfation.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

Revert "vxlan: fix tos value before xmit"

2020-08-11T13:32:35Z

[ Upstream commit a0dced17ad9dc08b1b25e0065b54c97a318e6e8b ] This reverts commit 71130f29979c7c7956b040673e6b9d5643003176. In commit 71130f29979c ("vxlan: fix tos value before xmit") we want to make sure the tos value are filtered by RT_TOS() based on RFC1349. 0 1 2 3 4 5 6 7 +-----+-----+-----+-----+-----+-----+-----+-----+ | PRECEDENCE | TOS | MBZ | +-----+-----+-----+-----+-----+-----+-----+-----+ But RFC1349 has been obsoleted by RFC2474. The new DSCP field defined like 0 1 2 3 4 5 6 7 +-----+-----+-----+-----+-----+-----+-----+-----+ | DS FIELD, DSCP | ECN FIELD | +-----+-----+-----+-----+-----+-----+-----+-----+ So with IPTOS_TOS_MASK 0x1E RT_TOS(tos) ((tos)&IPTOS_TOS_MASK) the first 3 bits DSCP info will get lost. To take all the DSCP info in xmit, we should revert the patch and just push all tos bits to ip_tunnel_ecn_encap(), which will handling ECN field later. Fixes: 71130f29979c ("vxlan: fix tos value before xmit") Signed-off-by: Hangbin Liu Acked-by: Guillaume Nault Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman