kernel.git/drivers/net/virtio_net.c, branch linux-5.14.y

virtio-net: fix pages leaking when building skb in big mode

2021-09-30T08:12:57Z

[ Upstream commit afd92d82c9d715fb97565408755acad81573591a ] We try to use build_skb() if we had sufficient tailroom. But we forget to release the unused pages chained via private in big mode which will leak pages. Fixing this by release the pages after building the skb in big mode. Cc: Xuan Zhuo Fixes: fb32856b16ad ("virtio-net: page_to_skb() use build_skb when there's sufficient tailroom") Signed-off-by: Jason Wang Reviewed-by: Xuan Zhuo Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

virtio-net: use NETIF_F_GRO_HW instead of NETIF_F_LRO

2021-08-17T09:45:09Z

Commit a02e8964eaf92 ("virtio-net: ethtool configurable LRO") maps LRO to virtio guest offloading features and allows the administrator to enable and disable those features via ethtool. This leads to several issues: - For a device that doesn't support control guest offloads, the "LRO" can't be disabled triggering WARN in dev_disable_lro() when turning off LRO or when enabling forwarding bridging etc. - For a device that supports control guest offloads, the guest offloads are disabled in cases of bridging, forwarding etc slowing down the traffic. Fix this by using NETIF_F_GRO_HW instead. Though the spec does not guarantee packets to be re-segmented as the original ones, we can add that to the spec, possibly with a flag for devices to differentiate between GRO and LRO. Further, we never advertised LRO historically before a02e8964eaf92 ("virtio-net: ethtool configurable LRO") and so bridged/forwarded configs effectively always relied on virtio receive offloads behaving like GRO - thus even if this breaks any configs it is at least not a regression. Fixes: a02e8964eaf92 ("virtio-net: ethtool configurable LRO") Acked-by: Michael S. Tsirkin Reported-by: Ivan Tested-by: Ivan Signed-off-by: Jason Wang Signed-off-by: David S. Miller

Merge tag 'net-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2021-07-14T16:24:32Z

Pull networking fixes from Jakub Kicinski. "Including fixes from bpf and netfilter. Current release - regressions: - sock: fix parameter order in sock_setsockopt() Current release - new code bugs: - netfilter: nft_last: - fix incorrect arithmetic when restoring last used - honor NFTA_LAST_SET on restoration Previous releases - regressions: - udp: properly flush normal packet at GRO time - sfc: ensure correct number of XDP queues; don't allow enabling the feature if there isn't sufficient resources to Tx from any CPU - dsa: sja1105: fix address learning getting disabled on the CPU port - mptcp: addresses a rmem accounting issue that could keep packets in subflow receive buffers longer than necessary, delaying MPTCP-level ACKs - ip_tunnel: fix mtu calculation for ETHER tunnel devices - do not reuse skbs allocated from skbuff_fclone_cache in the napi skb cache, we'd try to return them to the wrong slab cache - tcp: consistently disable header prediction for mptcp Previous releases - always broken: - bpf: fix subprog poke descriptor tracking use-after-free - ipv6: - allocate enough headroom in ip6_finish_output2() in case iptables TEE is used - tcp: drop silly ICMPv6 packet too big messages to avoid expensive and pointless lookups (which may serve as a DDOS vector) - make sure fwmark is copied in SYNACK packets - fix 'disable_policy' for forwarded packets (align with IPv4) - netfilter: conntrack: - do not renew entry stuck in tcp SYN_SENT state - do not mark RST in the reply direction coming after SYN packet for an out-of-sync entry - mptcp: cleanly handle error conditions with MP_JOIN and syncookies - mptcp: fix double free when rejecting a join due to port mismatch - validate lwtstate->data before returning from skb_tunnel_info() - tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path - mt76: mt7921: continue to probe driver when fw already downloaded - bonding: fix multiple issues with offloading IPsec to (thru?) bond - stmmac: ptp: fix issues around Qbv support and setting time back - bcmgenet: always clear wake-up based on energy detection Misc: - sctp: move 198 addresses from unusable to private scope - ptp: support virtual clocks and timestamping - openvswitch: optimize operation for key comparison" * tag 'net-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (158 commits) net: dsa: properly check for the bridge_leave methods in dsa_switch_bridge_leave() sfc: add logs explaining XDP_TX/REDIRECT is not available sfc: ensure correct number of XDP queues sfc: fix lack of XDP TX queues - error XDP TX failed (-22) net: fddi: fix UAF in fza_probe net: dsa: sja1105: fix address learning getting disabled on the CPU port net: ocelot: fix switchdev objects synced for wrong netdev with LAG offload net: Use nlmsg_unicast() instead of netlink_unicast() octeontx2-pf: Fix uninitialized boolean variable pps ipv6: allocate enough headroom in ip6_finish_output2() net: hdlc: rename 'mod_init' & 'mod_exit' functions to be module-specific net: bridge: multicast: fix MRD advertisement router port marking race net: bridge: multicast: fix PIM hello router port marking race net: phy: marvell10g: fix differentiation of 88X3310 from 88X3340 dsa: fix for_each_child.cocci warnings virtio_net: check virtqueue_add_sgs() return value mptcp: properly account bulk freed memory selftests: mptcp: fix case multiple subflows limited by server mptcp: avoid processing packet if a subflow reset mptcp: fix syncookie process if mptcp can not_accept new subflow ...

virtio_net: check virtqueue_add_sgs() return value

2021-07-10T18:29:30Z

As virtqueue_add_sgs() can fail, we should check the return value. Addresses-Coverity-ID: 1464439 ("Unchecked return value") Signed-off-by: Yunjian Wang Signed-off-by: David S. Miller

virtio_net: disable cb aggressively

2021-07-08T11:49:01Z

There are currently two cases where we poll TX vq not in response to a callback: start xmit and rx napi. We currently do this with callbacks enabled which can cause extra interrupts from the card. Used not to be a big issue as we run with interrupts disabled but that is no longer the case, and in some cases the rate of spurious interrupts is so high linux detects this and actually kills the interrupt. Fix up by disabling the callbacks before polling the tx vq. Signed-off-by: Michael S. Tsirkin

virtio_net: move txq wakeups under tx q lock

2021-07-03T08:51:17Z

We currently check num_free outside tx q lock which is unsafe: new packets can arrive meanwhile and there won't be space in the queue. Thus a spurious queue wakeup causing overhead and even packet drops. Move the check under the lock to fix that. Signed-off-by: Michael S. Tsirkin

virtio_net: move tx vq operation under tx queue lock

2021-07-03T08:51:17Z

It's unsafe to operate a vq from multiple threads. Unfortunately this is exactly what we do when invoking clean tx poll from rx napi. Same happens with napi-tx even without the opportunistic cleaning from the receive interrupt: that races with processing the vq in start_xmit. As a fix move everything that deals with the vq to under tx lock. Fixes: b92f1e6751a6 ("virtio-net: transmit napi") Signed-off-by: Michael S. Tsirkin

virtio_net: Fix error handling in virtnet_restore()

2021-07-03T08:50:52Z

Do some cleanups in virtnet_restore() when virtnet_cpu_notif_add() failed. Signed-off-by: Xie Yongji Link: https://lore.kernel.org/r/20210517084516.332-1-xieyongji@bytedance.com Acked-by: Jason Wang Signed-off-by: Michael S. Tsirkin

virtio_net: Use virtio_find_vqs_ctx() helper

2021-06-23T20:52:22Z

virtio_find_vqs_ctx() is defined but never be called currently, it is the right place to use it. Signed-off-by: Xianting Tian Reviewed-by: Stefano Garzarella Signed-off-by: David S. Miller

virtio_net: Remove BUG() to avoid machine dead

2021-06-07T20:06:46Z

We should not directly BUG() when there is hdr error, it is better to output a print when such error happens. Currently, the caller of xmit_skb() already did it. Signed-off-by: Xianting Tian Reviewed-by: Leon Romanovsky Signed-off-by: David S. Miller