kernel.git/drivers/net/usb/Kconfig, branch linux-3.16.y

USB2NET: Fix Default to 'y' for SR9800 Device Driver, setting to 'n'

2014-02-13T23:42:01Z

Signed-off-by: Liu Junliang Signed-off-by: David S. Miller

USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support

2014-02-11T00:53:06Z

Signed-off-by: Liu Junliang Signed-off-by: David S. Miller

r8152: change the descriptor

2014-01-15T02:48:54Z

The r8152 could support RTL8153. Update the relative descriptor. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller

dm9601: make it clear that dm9620/dm9621a are also supported

2013-12-18T22:46:55Z

The driver nowadays also support dm9620/dm9621a based USB 2.0 ethernet adapters, so adjust module/driver description and Kconfig help text to match. Signed-off-by: Peter Korsgaard Signed-off-by: David S. Miller

net: huawei_cdc_ncm: Introduce the huawei_cdc_ncm driver

2013-11-05T20:21:25Z

This driver supports devices using the NCM protocol as an encapsulation layer for other protocols, like the E3131 Huawei 3G modem. This drivers approach was heavily inspired by the qmi_wwan/cdc_mbim approach & code model. Signed-off-by: Enrico Mioso Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller

USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support

2013-09-04T02:26:03Z

Signed-off-by: Liu Junliang Signed-off-by: David S. Miller

net: Move MII out from under NET_CORE and hide it

2013-06-20T05:22:56Z

All drivers that select MII also need to select NET_CORE because MII depends on it. This is a bit ridiculous because NET_CORE is just a menu option that doesn't enable any code by itself. There is also no need for it to be a visible option, since its users all select it. Signed-off-by: Ben Hutchings Acked-by: Jeff Kirsher Signed-off-by: David S. Miller

net/usb: new driver for RTL8152

2013-05-06T20:16:52Z

Add new driver for supporting Realtek RTL8152 Based USB 2.0 Ethernet Adapters Signed-off-by: Hayes Wang Cc: Realtek linux nic maintainers Signed-off-by: David S. Miller

smsc75xx: configuration help incorrectly mentions smsc95xx

2013-03-15T13:06:57Z

The Kconfig file help information incorrectly mentions that the SMSC LAN75xx config option is for SMSC LAN95xx devices. Signed-off-by: Robert de Vries Signed-off-by: David S. Miller

ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver

2013-03-03T06:43:47Z

This is a resubmission. Added kfree() in ax88179_get_eeprom to prevent memory leakage. Modified "__le16 rxctl" to "u16 rxctl" in "struct ax88179_data" and removed pointless casts. Removed asix_init and asix_exit functions and added "module_usb_driver(ax88179_178a_driver)". Fixed endianness issue on big endian systems and verified this driver on iBook G4. Removed steps that change net->features in ax88179_set_features function. Added "const" to ethtool_ops structure and fixed the coding style of AX88179_BULKIN_SIZE array. Fixed the issue that the default MTU is not 1500. Added ax88179_change_mtu function and enabled the hardware jumbo frame function to support an MTU higher than 1500. Fixed indentation and empty line coding style errors. The _nopm version usb functions were added to access register in suspend and resume functions. Serveral variables allocted dynamically were removed and replaced by stack variables. ax88179_get_eeprom were modified from asix_get_eeprom in asix_common. This patch adds a driver for ASIX's AX88179 family of USB 3.0/2.0 to gigabit ethernet adapters. It's based on the AX88xxx driver but the usb commands used to access registers for AX88179 are completely different. This driver had been verified on x86 system with AX88179/AX88178A and Sitcomm LN-032 USB dongles. Signed-off-by: Freddy Xin Signed-off-by: David S. Miller