kernel.git/drivers/net/team/team.c, branch linux-4.10.y

team: use ETH_MAX_MTU as max mtu

2017-03-22T11:57:00Z

[ Upstream commit 3331aa378e9bcbd0d16de9034b0c20f4050e26b4 ] This restores the ability to set a team device's mtu to anything higher than 1500. Similar to the reported issue with bonding, the team driver calls ether_setup(), which sets an initial max_mtu of 1500, while the underlying hardware can handle something much larger. Just set it to ETH_MAX_MTU to support all possible values, and the limitations of the underlying devices will prevent setting anything too large. Fixes: 91572088e3fd ("net: use core MTU range checking in core net infra") CC: Cong Wang CC: Jiri Pirko CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

genetlink: mark families as __ro_after_init

2016-10-27T20:16:09Z

Now genl_register_family() is the only thing (other than the users themselves, perhaps, but I didn't find any doing that) writing to the family struct. In all families that I found, genl_register_family() is only called from __init functions (some indirectly, in which case I've add __init annotations to clarifly things), so all can actually be marked __ro_after_init. This protects the data structure from accidental corruption. Signed-off-by: Johannes Berg Signed-off-by: David S. Miller

genetlink: statically initialize families

2016-10-27T20:16:09Z

Instead of providing macros/inline functions to initialize the families, make all users initialize them statically and get rid of the macros. This reduces the kernel code size by about 1.6k on x86-64 (with allyesconfig). Signed-off-by: Johannes Berg Signed-off-by: David S. Miller

genetlink: no longer support using static family IDs

2016-10-27T20:16:09Z

Static family IDs have never really been used, the only use case was the workaround I introduced for those users that assumed their family ID was also their multicast group ID. Additionally, because static family IDs would never be reserved by the generic netlink code, using a relatively low ID would only work for built-in families that can be registered immediately after generic netlink is started, which is basically only the control family (apart from the workaround code, which I also had to add code for so it would reserve those IDs) Thus, anything other than GENL_ID_GENERATE is flawed and luckily not used except in the cases I mentioned. Move those workarounds into a few lines of code, and then get rid of GENL_ID_GENERATE entirely, making it more robust. Signed-off-by: Johannes Berg Signed-off-by: David S. Miller

net: introduce default neigh_construct/destroy ndo calls for L2 upper devices

2016-07-05T16:06:28Z

L2 upper device needs to propagate neigh_construct/destroy calls down to lower devices. Do this by defining default ndo functions and use them in team, bond, bridge and vlan. Signed-off-by: Jiri Pirko Reviewed-by: Ido Schimmel Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2016-06-30T09:03:36Z

Several cases of overlapping changes, except the packet scheduler conflicts which deal with the addition of the free list parameter to qdisc_enqueue(). Signed-off-by: David S. Miller

team: Fix possible deadlock during team enslave

2016-06-22T20:31:03Z

Both dev_uc_sync_multiple() and dev_mc_sync_multiple() require the source device to be locked by netif_addr_lock_bh(), but this is missing in team's enslave function, so add it. This fixes the following lockdep warning: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(_xmit_ETHER/1); local_irq_disable(); lock(&(&mc->mca_lock)->rlock); lock(&team_netdev_addr_lock_key); lock(&(&mc->mca_lock)->rlock); *** DEADLOCK *** Fixes: cb41c997d444 ("team: team should sync the port's uc/mc addrs when add a port") Signed-off-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller

net: add netdev_lockdep_set_classes() helper

2016-06-09T20:28:37Z

It is time to add netdev_lockdep_set_classes() helper so that lockdep annotations per device type are easier to manage. This removes a lot of copies and missing annotations. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller

net_sched: transform qdisc running bit into a seqcount

2016-06-07T23:37:13Z

Instead of using a single bit (__QDISC___STATE_RUNNING) in sch->__state, use a seqcount. This adds lockdep support, but more importantly it will allow us to sample qdisc/class statistics without having to grab qdisc root lock. Signed-off-by: Eric Dumazet Cc: Cong Wang Cc: Jamal Hadi Salim Signed-off-by: David S. Miller

team: don't call netdev_change_features under team->lock

2016-05-25T19:58:04Z

The team_device_event() notifier calls team_compute_features() to fix vlan_features under team->lock to protect team->port_list. The problem is that subsequent __team_compute_features() calls netdev_change_features() to propagate vlan_features to upper vlan devices while team->lock is still taken. This can lead to deadlock when NETIF_F_LRO is modified on lower devices or team device itself. Example: The team0 as active backup with eth0 and eth1 NICs. Both eth0 & eth1 are LRO capable and LRO is enabled. Thus LRO is also enabled on team0. The command 'ethtool -K team0 lro off' now hangs due to this deadlock: dev_ethtool() -> ethtool_set_features() -> __netdev_update_features(team) -> netdev_sync_lower_features() -> netdev_update_features(lower_1) -> __netdev_update_features(lower_1) -> netdev_features_change(lower_1) -> call_netdevice_notifiers(...) -> team_device_event(lower_1) -> team_compute_features(team) [TAKES team->lock] -> netdev_change_features(team) -> __netdev_update_features(team) -> netdev_sync_lower_features() -> netdev_update_features(lower_2) -> __netdev_update_features(lower_2) -> netdev_features_change(lower_2) -> call_netdevice_notifiers(...) -> team_device_event(lower_2) -> team_compute_features(team) [DEADLOCK] The bug is present in team from the beginning but it appeared after the commit fd867d5 (net/core: generic support for disabling netdev features down stack) that adds synchronization of features with lower devices. Fixes: fd867d5 (net/core: generic support for disabling netdev features down stack) Cc: Jiri Pirko Signed-off-by: Ivan Vecera Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller