kernel.git/drivers/net/sfc/phy.h, branch linux-2.6.34.y

sfc: Update version, copyright dates, authors

2009-11-30T01:23:58Z

This driver has been mostly rewritten since Michael Brown's initial work, so swap the order of the authors. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller

sfc: Add support for SFC9000 family (2)

2009-11-30T01:23:57Z

This integrates support for the SFC9000 family of 10G Ethernet controllers and LAN-on-motherboard chips, starting with the SFL9021 'Siena' and SFC9020 'Bethpage'. Credit for this code is largely due to my colleagues at Solarflare: Guido Barzini Steve Hodgson Kieran Mansley Matthew Slattery Neil Turton Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller

sfc: Use a single blink implementation

2009-11-24T18:58:39Z

Only some PHYs have firmware support for a LED blink mode, so we currently blink the others in a timer function. Since all PHYs have simple on and off modes, we don't gain anything by using multiple blink implementations. Also, since we have a process context there is no need to use a timer. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller

sfc: Rename 'xfp' file and functions to reflect reality

2009-10-24T11:27:28Z

The 'XFP' driver is really a driver for the QT2022C2 and QT2025C PHYs, covering both more and less than XFP. Rename its functions and constants to reflect reality and to reduce namespace pollution when sfc is a built-in driver. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller

sfc: Add support for QT2025C PHY

2009-03-02T11:15:04Z

This is a new PHY supporting SFP+ modules, used in the SFN4112F reference design. It is similar to the QT2022C2 and shares much of its support code. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller

sfc: SFT9001/SFN4111T: Check PHY boot status during board initialisation

2009-03-02T11:15:03Z

During SFN4111T initialisation, check whether the PHY boot status indicates a bad firmware checksum. If so, prepare to reflash rather than continuing with normal initialisation. Remove redundant PHY boot status check from tenxpress_phy_init(). Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller

sfc: SFX7101: Remove workaround for bad link training

2009-01-30T22:06:27Z

Early versions of the SFX7101 firmware could complete link training in a state where it would not adequately cancel noise (Solarflare bug 10750). We previously worked around this by resetting the PHY after seeing many Ethernet CRC errors. This workaround is unsafe since it takes no account of the interval between errors; it also appears to be unnecessary with production firmware. Therefore remove it. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller

sfc: Add support for Solarflare 10Xpress SFT9001

2008-12-13T06:00:17Z

Add type codes for the new PHY and rename the SFX7101 type code. Add definition of clause 22 extension MMD. Adapt the 10Xpress SFX7101 code to support the SFT9001 as well. Clean up register definitions. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller

sfc: Make PHY flash mode a device attribute, not a module parameter

2008-09-03T13:53:47Z

This allows updating PHY firmware for one interface without removing all other interfaces handled by the driver. Replace tx_disabled flags and 10Xpress status enumeration with flags in enum efx_phy_mode. Prevent an interface from being brought up while in PHY flash mode. Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik

sfc: Use explicit bool for boolean variables, parameters and return values

2008-09-03T13:53:45Z

Replace (cond ? 1 : 0) with cond or !!cond as appropriate, and (cond ? 0 : 1) with !cond. Remove some redundant boolean temporaries. Rename one field that looks like a flag but isn't. Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik