kernel.git/drivers/net/phy/phy-core.c, branch linux-5.8.y

net: mdiobus: add clause 45 mdiobus accessors

2020-05-26T22:31:45Z

There is a recurring pattern throughout some of the PHY code converting a devad and regnum to our packed clause 45 representation. Rather than having this scattered around the code, let's put a common translation function in mdio.h, and provide some register accessors. Convert the phylib core, phylink, bcm87xx and cortina to use these. Signed-off-by: Russell King Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: phy: add and use phy_check_downshift

2020-03-24T04:09:47Z

So far PHY drivers have to check whether a downshift occurred to be able to notify the user. To make life of drivers authors a little bit easier move the downshift notification to phylib. phy_check_downshift() compares the highest mutually advertised speed with the actual value of phydev->speed (typically read by the PHY driver from a vendor-specific register) to detect a downshift. v2: - Add downshift hint to phy_print_status Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller

net: mdiobus: add APIs for modifying a MDIO device register

2020-03-18T05:51:16Z

Add APIs for modifying a MDIO device register, similar to the existing phy_modify() group of functions, but at mdiobus level instead. Adapt __phy_modify_changed() to use the new mdiobus level helper. Signed-off-by: Russell King Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

ethtool: Add support for low latency RS FEC

2020-02-19T03:17:31Z

Add support for low latency Reed Solomon FEC as LLRS. The LL-FEC is defined by the 25G/50G ethernet consortium, in the document titled "Low Latency Reed Solomon Forward Error Correction" Signed-off-by: Aya Levin Reviewed-by: Eran Ben Elisha CC: Andrew Lunn Signed-off-by: Saeed Mahameed Reviewed-by: Andrew Lunn

net: phy: don't crash in phy_read/_write_mmd without a PHY driver

2020-01-20T09:08:20Z

The APIs can be used by Ethernet drivers without actually loading a PHY driver. This may become more widespread in the future with 802.3z compatible MAC PCS devices being locally driven by the MAC driver when configuring for a PHY mode with in-band negotiation. Check that drv is not NULL before reading from it. Signed-off-by: Alex Marginean Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: phy: add helpers phy_(un)lock_mdio_bus

2019-11-25T18:47:00Z

Add helpers to make locking/unlocking the MDIO bus easier. Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller

net: phy: avoid NPE if read_page/write_page callbacks are not available

2019-10-18T16:57:55Z

Currently there's a bug in the module subsystem [0] preventing load of the PHY driver module on certain systems (as one symptom). This results in a NPE on such systems for the following reason: Instead of the correct PHY driver the genphy driver is loaded that doesn't implement the read_page/write_page callbacks. Every call to phy_read_paged() et al will result in a NPE therefore. In parallel to fixing the root cause we should make sure that this one and maybe similar issues in other subsystems don't result in a NPE in phylib. So let's check for the callbacks before using them and warn once if they are not available. [0] https://marc.info/?t=157072642100001&r=1&w=2 Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller

ethtool: Add support for 400Gbps (50Gbps per lane) link modes

2019-10-15T22:02:30Z

Add support for 400Gbps speed, link modes of 50Gbps per lane Signed-off-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller

net: phy: extract pause mode

2019-10-05T01:11:08Z

Extract the update of phylib's software pause mode state from genphy_read_status(), so that we can re-use this functionality with PHYs that have alternative ways to read the negotiation results. Tested-by: tinywrkb Reviewed-by: Andrew Lunn Signed-off-by: Russell King Signed-off-by: David S. Miller

net: phy: add phy_speed_down_core and phy_resolve_min_speed

2019-08-14T00:14:06Z

phy_speed_down_core provides most of the functionality for phy_speed_down. It makes use of new helper phy_resolve_min_speed that is based on the sorting of the settings[] array. In certain cases it may be helpful to be able to exclude legacy half duplex modes, therefore prepare phy_resolve_min_speed() for it. v2: - rename __phy_speed_down to phy_speed_down_core Signed-off-by: Heiner Kallweit Reviewed-by: Andrew Lunn Signed-off-by: Jakub Kicinski