kernel.git/drivers/net/phy/micrel.c, branch linux-3.17.y

net/phy: micrel: Disable asymmetric pause for KSZ9031

2014-09-15T18:24:10Z

The KSZ9031 appears to suffer from the same hardware bug as described for the KSZ9021 in commit 32fcafbcd1c9f6c7013016a22a5369b4acb93577 ("net/phy: micrel: Disable asymmetric pause for KSZ9021") you have to unplug the cable and plug it back to get it to work. Remove the SUPPORTED_Asym_Pause flag for the KSZ9031 to fix this. Signed-off-by: Mike Looijmans Signed-off-by: David S. Miller

net: libphy: Add stubs to hook IEEE MMD Register reads and writes

2014-07-31T03:00:21Z

The Micrel ksz9021 PHY does not support standard IEEE standard MMD extended register access, therefore requires stubs to fail the read register method and do nothing for the write register method when libphy attempts to read and/or configure Energy Efficient Ethernet features in PHYS that do support those features. This problem was observed on an Altera Cyclone V SOC development kit that uses the Synopsys EMAC and the Micrel ksz9021 PHY. This patch was tested on the same board, and Energy Efficient Ethernet is now disabled as expected since the Micrel PHY does not support that feature. Signed-off-by: Vince Bridgers Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

ARM: i.MX6: Add OF configuration support for ksz9031

2014-05-07T20:51:09Z

Adds support for ksz9031 PAD skew configuration over devicetree. Signed-off-by: Hubert Chaumette Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net/phy: micrel: fix bugged test on device tree loading for ksz9021

2014-04-23T18:58:58Z

In ksz9021_load_values_from_of() val2 to val4 aren't tested against their initialization value. This causes the test to always succeed, and this value to be used as if it was loaded from the devicetree instead of being ignored, in case of a missing/invalid property in the ethernet OF device node. As a result, the value "0" is written to the relevant registers. Change the conditions to test against the right initialization value. Signed-off-by: Hubert Chaumette Signed-off-by: David S. Miller

micrel: fix masking off LED bits

2014-03-19T21:41:50Z

Commit 20d8435a1cff (phy: micrel: add of configuration for LED mode) made the obvious mistake when masking off the LED mode bits: forgot to do a logical NOT to the mask with which it ANDs the register value, so that unrelated bits are cleared instead. Signed-off-by: Sergei Shtylyov Acked-by: Laurent Pinchart Acked-by: Ben Dooks Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

phy: micrel: add of configuration for LED mode

2014-02-26T22:00:07Z

Add support for the led-mode property for the following PHYs which have a single LED mode configuration value. KSZ8001 and KSZ8041 which both use register 0x1e bits 15,14 and KSZ8021, KSZ8031 and KSZ8051 which use register 0x1f bits 5,4 to control the LED configuration. Signed-off-by: Ben Dooks Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2013-12-18T21:42:06Z

Conflicts: drivers/net/ethernet/intel/i40e/i40e_main.c drivers/net/macvtap.c Both minor merge hassles, simple overlapping changes. Signed-off-by: David S. Miller

net: phy: micrel: fix checkpath errors

2013-12-18T05:49:02Z

checkpatch spotted a few spaces vs tabs errors, fix them. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

micrel: add support for KSZ8041RNLI

2013-12-11T18:54:13Z

Renesas R-Car development boards use KSZ8041RNLI PHY which for some reason has ID of 0x00221537 that is not documented for KSZ8041-family PHYs and does not match the documented ID of 0x0022151x (where 'x' is the revision). We have to add the new #define PHY_ID_* and new ksphy_driver[] entry, almost the same as KSZ8041 one, differing only in the 'phy_id' and 'name' fields. Signed-off-by: Sergei Shtylyov Tested-by: Geert Uytterhoeven Signed-off-by: David S. Miller

phy/micrel: Add suspend/resume support to Micrel PHYs

2013-09-20T18:41:03Z

All supported Micrel PHYs implement the standard "power down" bit 11 of BMCR, so this patch adds support using the generic genphy_{suspend,resume} functions. Signed-off-by: Patrice Vilchez [b.brezillon@overkiz.com: adapt to newer kernel and generalize to other phys] Signed-off-by: Boris BREZILLON [nicolas.ferre@atmel.com: commit message modification] Signed-off-by: Nicolas Ferre Cc: David J. Choi Signed-off-by: David S. Miller