kernel.git/drivers/net/phy/Kconfig, branch linux-5.14.y

net: phy: add driver for Motorcomm yt8511 phy

2021-05-21T20:19:11Z

Add a driver for the Motorcomm yt8511 phy that will be used in the production Pine64 rk3566-quartz64 development board. It supports gigabit transfer speeds, rgmii, and 125mhz clk output. Signed-off-by: Peter Geis Signed-off-by: David S. Miller

net: phy: add MediaTek Gigabit Ethernet PHY driver

2021-05-19T20:27:42Z

Add support for MediaTek Gigabit Ethernet PHYs found in MT7530 and MT7531 switches. The initialization procedure is from the vendor driver, but due to lack of documentation, the function of some register values remains unknown. Signed-off-by: DENG Qingfang Signed-off-by: David S. Miller

net: phy: add support for qca8k switch internal PHY in at803x

2021-05-14T22:30:23Z

Since the at803x share the same regs, it's assumed they are based on the same implementation. Make it part of the at803x PHY driver to skip having redudant code. Add initial support for qca8k internal PHYs. The internal PHYs requires special mmd and debug values to be set based on the switch revision passwd using the dev_flags. Supports output of idle, receive and eee_wake errors stats. Some debug values sets can't be translated as the documentation lacks any reference about them. Signed-off-by: Ansuel Smith Signed-off-by: David S. Miller

phy: nxp-c45: add driver for tja1103

2021-04-19T23:19:44Z

Add driver for tja1103 driver and for future NXP C45 PHYs. Signed-off-by: Radu Pirea (NXP OSS) Signed-off-by: David S. Miller

net: phy: add Marvell 88X2222 transceiver support

2021-03-15T21:50:28Z

Add basic support for the Marvell 88X2222 multi-speed ethernet transceiver. This PHY provides data transmission over fiber-optic as well as Twinax copper links. The 88X2222 supports 2 ports of 10GBase-R and 1000Base-X on the line-side interface. The host-side interface supports 4 ports of 10GBase-R, RXAUI, 1000Base-X and 2 ports of XAUI. This driver, however, supports only XAUI on the host-side and 1000Base-X/10GBase-R on the line-side, for now. The SGMII is also supported over 1000Base-X. Interrupts are not supported. Internal registers access compliant with the Clause 45 specification. Signed-off-by: Ivan Bornyakov Signed-off-by: David S. Miller

net: phy: Sort Kconfig and Makefile

2020-08-27T13:55:51Z

Sort the Kconfig based on the text shown in make menuconfig and sort the Makefile by CONFIG symbol. Acked-by: Florian Fainelli Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller

net: mdio: Move MDIO drivers into a new subdirectory

2020-08-27T13:55:50Z

Move all the MDIO drivers and multiplexers into drivers/net/mdio. The mdio core is however left in the phy directory, due to mutual dependencies between the MDIO core and the PHY core. Take this opportunity to sort the Kconfig based on the menuconfig strings, and move the multiplexers to the end with a separating comment. v2: Fix typo in commit message Acked-by: Florian Fainelli Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller

net: pcs: Move XPCS into new PCS subdirectory

2020-08-27T13:55:50Z

Create drivers/net/pcs and move the Synopsys DesignWare XPCS into the new directory. Move the header file into a subdirectory include/linux/pcs Start a naming convention of all PCS files use the prefix pcs-, and rename the XPCS files to fit. v2: Add include/linux/pcs v4: Fix include path in stmmac. Remove PCS_DEVICES to avoid new prompts Cc: Jose Abreu Reviewed-by: Florian Fainelli Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: mdio-mvusb: select MDIO_DEVRES in Kconfig

2020-08-03T22:49:49Z

PHYLIB is not selected by the mvusb driver but it uses mdio devres helpers. Explicitly select MDIO_DEVRES in this driver's Kconfig entry. Reported-by: kernel test robot Fixes: 1814cff26739 ("net: phy: add a Kconfig option for mdio_devres") Signed-off-by: Bartosz Golaszewski Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: phy: fix mdio-mscc-miim build

2020-07-14T00:29:19Z

PHYLIB is not selected by mdio-mscc-miim but it uses mdio devres helpers. Explicitly select MDIO_DEVRES in this driver's Kconfig entry. Reported-by: kernel test robot Fixes: 1814cff26739 ("net: phy: add a Kconfig option for mdio_devres") Signed-off-by: Bartosz Golaszewski Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller