kernel.git/drivers/net/ethernet/xilinx, branch linux-5.14.y

net: ll_temac: Remove left-over debug message

2021-06-21T21:44:09Z

Fixes: f63963411942 ("net: ll_temac: Avoid ndo_start_xmit returning NETDEV_TX_BUSY") Signed-off-by: Esben Haabendal Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2021-06-19T02:47:02Z

Trivial conflicts in net/can/isotp.c and tools/testing/selftests/net/mptcp/mptcp_connect.sh scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c to include/linux/ptp_clock_kernel.h in -next so re-apply the fix there. Signed-off-by: Jakub Kicinski

net: ll_temac: Avoid ndo_start_xmit returning NETDEV_TX_BUSY

2021-06-18T19:11:51Z

As documented in Documentation/networking/driver.rst, the ndo_start_xmit method must not return NETDEV_TX_BUSY under any normal circumstances, and as recommended, we simply stop the tx queue in advance, when there is a risk that the next xmit would cause a NETDEV_TX_BUSY return. Signed-off-by: Esben Haabendal Signed-off-by: David S. Miller

net: ll_temac: Fix TX BD buffer overwrite

2021-06-18T19:11:51Z

Just as the initial check, we need to ensure num_frag+1 buffers available, as that is the number of buffers we are going to use. This fixes a buffer overflow, which might be seen during heavy network load. Complete lockup of TEMAC was reproducible within about 10 minutes of a particular load. Fixes: 84823ff80f74 ("net: ll_temac: Fix race condition causing TX hang") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Esben Haabendal Signed-off-by: David S. Miller

net: ll_temac: Add memory-barriers for TX BD access

2021-06-18T19:11:51Z

Add a couple of memory-barriers to ensure correct ordering of read/write access to TX BDs. In xmit_done, we should ensure that reading the additional BD fields are only done after STS_CTRL_APP0_CMPLT bit is set. When xmit_done marks the BD as free by setting APP0=0, we need to ensure that the other BD fields are reset first, so we avoid racing with the xmit path, which writes to the same fields. Finally, making sure to read APP0 of next BD after the current BD, ensures that we see all available buffers. Signed-off-by: Esben Haabendal Signed-off-by: David S. Miller

net: ll_temac: Make sure to free skb when it is completely used

2021-06-18T19:11:51Z

With the skb pointer piggy-backed on the TX BD, we have a simple and efficient way to free the skb buffer when the frame has been transmitted. But in order to avoid freeing the skb while there are still fragments from the skb in use, we need to piggy-back on the TX BD of the skb, not the first. Without this, we are doing use-after-free on the DMA side, when the first BD of a multi TX BD packet is seen as completed in xmit_done, and the remaining BDs are still being processed. Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Esben Haabendal Signed-off-by: David S. Miller

net: axienet: Use devm_platform_get_and_ioremap_resource()

2021-06-10T20:53:13Z

Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by: Yang Yingliang Signed-off-by: David S. Miller

net: axienet: Fix fall-through warning for Clang

2021-05-30T20:44:39Z

In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly adding a fallthrough statement instead of just letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva Link: https://lore.kernel.org/r/20210528195831.GA39131@embeddedor Signed-off-by: Jakub Kicinski

net: xilinx_emaclite: Do not print real IOMEM pointer

2021-05-21T20:16:56Z

Printing kernel pointers is discouraged because they might leak kernel memory layout. This fixes smatch warning: drivers/net/ethernet/xilinx/xilinx_emaclite.c:1191 xemaclite_of_probe() warn: argument 4 to %08lX specifier is cast from pointer Signed-off-by: YueHaibing Signed-off-by: David S. Miller

net: xilinx: drivers need/depend on HAS_IOMEM

2021-04-19T22:36:00Z

kernel test robot reports build errors in 3 Xilinx ethernet drivers. They all use ioremap functions that are only available when HAS_IOMEM is set/enabled. If it is not enabled, they all have build errors, so make these 3 drivers depend on HAS_IOMEM. ld: drivers/net/ethernet/xilinx/xilinx_emaclite.o: in function `xemaclite_of_probe': xilinx_emaclite.c:(.text+0x9fc): undefined reference to `devm_ioremap_resource' ld: drivers/net/ethernet/xilinx/xilinx_axienet_main.o: in function `axienet_probe': xilinx_axienet_main.c:(.text+0x942): undefined reference to `devm_ioremap_resource' ld: drivers/net/ethernet/xilinx/ll_temac_main.o: in function `temac_probe': ll_temac_main.c:(.text+0x1283): undefined reference to `devm_platform_ioremap_resource_byname' ld: ll_temac_main.c:(.text+0x13ad): undefined reference to `devm_of_iomap' ld: ll_temac_main.c:(.text+0x162e): undefined reference to `devm_platform_ioremap_resource' Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Randy Dunlap Reported-by: kernel test robot Cc: Radhey Shyam Pandey Cc: Gary Guo Cc: Zhang Changzhong Cc: Andre Przywara Cc: stable@vger.kernel.org Cc: Daniel Borkmann Cc: "David S. Miller" Cc: Jakub Kicinski Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller