kernel.git/drivers/net/ethernet/ti, branch linux-5.7.y

net: ethernet: ti: am65-cpsw-nuss: restore vlan configuration while down/up

2020-08-19T06:23:49Z

[ Upstream commit 7bcffde02152dd3cb180f6f3aef27e8586b2a905 ] The vlan configuration is not restored after interface down/up sequence. Steps to check: # ip link add link eth0 name eth0.100 type vlan id 100 # ifconfig eth0 down # ifconfig eth0 up This patch fixes it, restoring vlan ALE entries on .ndo_open(). Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Grygorii Strashko Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

drivers: net: davinci_mdio: fix potential NULL dereference in davinci_mdio_probe()

2020-06-22T07:32:37Z

[ Upstream commit e00edb4efbbc07425441a3be2aa87abaf5800d96 ] platform_get_resource() may fail and return NULL, so we should better check it's return value to avoid a NULL pointer dereference since devm_ioremap() does not check input parameters for null. This is detected by Coccinelle semantic patch. @@ expression pdev, res, n, t, e, e1, e2; @@ res = \(platform_get_resource\|platform_get_resource_byname\)(pdev, t, n); + if (!res) + return -EINVAL; ... when != res == NULL e = devm_ioremap(e1, res->start, e2); Fixes: 03f66f067560 ("net: ethernet: ti: davinci_mdio: use devm_ioremap()") Signed-off-by: Wei Yongjun Reviewed-by: Grygorii Strashko Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: ethernet: ti: fix return value check in k3_cppi_desc_pool_create_name()

2020-06-22T07:32:18Z

[ Upstream commit 2ac757e4152e3322a04a6dfb3d1fa010d3521abf ] In case of error, the function gen_pool_create() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init

2020-06-17T14:42:58Z

[ Upstream commit 2074f9eaa58795a99e9da61c10f93180f810cfd6 ] The ALE parameters structure is created on stack, so it has to be reset before passing to cpsw_ale_create() to avoid garbage values. Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Grygorii Strashko Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: ethernet: ti: ale: fix allmulti for nu type ale

2020-06-17T14:42:58Z

[ Upstream commit bc139119a1708ae3db1ebb379630f286e28d06e8 ] On AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS allmulti setting does not allow unregistered mcast packets to pass. This happens, because ALE VLAN entries on these SoCs do not contain port masks for reg/unreg mcast packets, but instead store indexes of ALE_VLAN_MASK_MUXx_REG registers which intended for store port masks for reg/unreg mcast packets. This path was missed by commit 9d1f6447274f ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled"). Hence, fix it by taking into account ALE type in cpsw_ale_set_allmulti(). Fixes: 9d1f6447274f ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled") Signed-off-by: Grygorii Strashko Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: ethernet: ti: cpsw: fix ASSERT_RTNL() warning during suspend

2020-05-23T23:33:20Z

vlan_for_each() are required to be called with rtnl_lock taken, otherwise ASSERT_RTNL() warning will be triggered - which happens now during System resume from suspend: cpsw_suspend() |- cpsw_ndo_stop() |- __hw_addr_ref_unsync_dev() |- cpsw_purge_all_mc() |- vlan_for_each() |- ASSERT_RTNL(); Hence, fix it by surrounding cpsw_ndo_stop() by rtnl_lock/unlock() calls. Fixes: 15180eca569b ("net: ethernet: ti: cpsw: fix vlan mcast") Signed-off-by: Grygorii Strashko Signed-off-by: David S. Miller

net: ethernet: ti: am65-cpsw-nuss: fix error handling of am65_cpsw_nuss_probe

2020-05-22T00:14:18Z

Convert to using IS_ERR() instead of NULL test for cpsw_ale_create() error handling. Also fix to return negative error code from this error handling case instead of 0 in. Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Reported-by: Hulk Robot Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller

net: ethernet: ti: fix some return value check of cpsw_ale_create()

2020-05-22T00:14:18Z

cpsw_ale_create() can return both NULL and PTR_ERR(), but all of the caller only check NULL for error handling. This patch convert it to only return PTR_ERR() in all error cases, and the caller using IS_ERR() instead of NULL test. Fixes: 4b41d3436796 ("net: ethernet: ti: cpsw: allow untagged traffic on host port") Reported-by: Hulk Robot Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller

net: ethernet: ti: Remove TI_CPTS_MOD workaround

2020-05-12T19:33:27Z

My recent commit b6d49cab44b5 ("net: Make PTP-specific drivers depend on PTP_1588_CLOCK") exposes a missing dependency in defconfigs that select TI_CPTS without selecting PTP_1588_CLOCK, leading to linker errors of the form: drivers/net/ethernet/ti/cpsw.o: in function `cpsw_ndo_stop': cpsw.c:(.text+0x680): undefined reference to `cpts_unregister' ... That's because TI_CPTS_MOD (which is the symbol gating the _compilation_ of cpts.c) now depends on PTP_1588_CLOCK, and so is not enabled in these configurations, but TI_CPTS (which is the symbol gating _calls_ to the cpts functions) _is_ enabled. So we end up compiling calls to functions that don't exist, resulting in the linker errors. This patch fixes build errors and restores previous behavior by: - ensure PTP_1588_CLOCK=y in TI specific configs and CPTS will be built - remove TI_CPTS_MOD and, instead, add dependencies from CPTS in TI_CPSW/TI_KEYSTONE_NETCP/TI_CPSW_SWITCHDEV as below: config TI_CPSW_SWITCHDEV ... depends on TI_CPTS || !TI_CPTS which will ensure proper dependencies PTP_1588_CLOCK -> TI_CPTS -> TI_CPSW/TI_KEYSTONE_NETCP/TI_CPSW_SWITCHDEV and build type selection. Note. For NFS boot + CPTS all of above configs have to be built-in. Cc: Arnd Bergmann Cc: Dan Murphy Cc: Tony Lindgren Fixes: b6d49cab44b5 ("net: Make PTP-specific drivers depend on PTP_1588_CLOCK") Reported-by: kbuild test robot Signed-off-by: Clay McClure [grygorii.strashko@ti.com: rewording, add deps cpsw/netcp from cpts, drop IS_REACHABLE] Signed-off-by: Grygorii Strashko Reviewed-by: Arnd Bergmann Tested-by: Tony Lindgren Signed-off-by: David S. Miller

net: ethernet: ti: am65-cpsw-nuss: fix irqs type

2020-05-07T00:53:00Z

The K3 INTA driver, which is source TX/RX IRQs for CPSW NUSS, defines IRQs triggering type as EDGE by default, but triggering type for CPSW NUSS TX/RX IRQs has to be LEVEL as the EDGE triggering type may cause unnecessary IRQs triggering and NAPI scheduling for empty queues. It was discovered with RT-kernel. Fix it by explicitly specifying CPSW NUSS TX/RX IRQ type as IRQF_TRIGGER_HIGH. Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Grygorii Strashko Signed-off-by: David S. Miller