kernel.git/drivers/net/ethernet/ti, branch linux-5.19.y

net: ethernet: ti: davinci_mdio: fix build for mdio bitbang uses

2022-10-24T07:58:30Z

commit 35bbe652c421037822aba29423f5f1f7d0d69f3f upstream. davinci_mdio.c uses mdio bitbang APIs, so it should select MDIO_BITBANG to prevent build errors. arm-linux-gnueabi-ld: drivers/net/ethernet/ti/davinci_mdio.o: in function `davinci_mdio_remove': drivers/net/ethernet/ti/davinci_mdio.c:649: undefined reference to `free_mdio_bitbang' arm-linux-gnueabi-ld: drivers/net/ethernet/ti/davinci_mdio.o: in function `davinci_mdio_probe': drivers/net/ethernet/ti/davinci_mdio.c:545: undefined reference to `alloc_mdio_bitbang' arm-linux-gnueabi-ld: drivers/net/ethernet/ti/davinci_mdio.o: in function `davinci_mdiobb_read': drivers/net/ethernet/ti/davinci_mdio.c:236: undefined reference to `mdiobb_read' arm-linux-gnueabi-ld: drivers/net/ethernet/ti/davinci_mdio.o: in function `davinci_mdiobb_write': drivers/net/ethernet/ti/davinci_mdio.c:253: undefined reference to `mdiobb_write' Fixes: d04807b80691 ("net: ethernet: ti: davinci_mdio: Add workaround for errata i2329") Signed-off-by: Randy Dunlap Cc: Grygorii Strashko Cc: Ravi Gunasekaran Cc: Eric Dumazet Cc: Paolo Abeni Cc: Naresh Kamboju Cc: Sudip Mukherjee (Codethink) Link: https://lore.kernel.org/r/20220824024216.4939-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: ethernet: ti: davinci_mdio: Add workaround for errata i2329

2022-10-24T07:58:11Z

[ Upstream commit d04807b80691c6041ca8e3dcf1870d1bf1082c22 ] On the CPSW and ICSS peripherals, there is a possibility that the MDIO interface returns corrupt data on MDIO reads or writes incorrect data on MDIO writes. There is also a possibility for the MDIO interface to become unavailable until the next peripheral reset. The workaround is to configure the MDIO in manual mode and disable the MDIO state machine and emulate the MDIO protocol by reading and writing appropriate fields in MDIO_MANUAL_IF_REG register of the MDIO controller to manipulate the MDIO clock and data pins. More details about the errata i2329 and the workaround is available in: https://www.ti.com/lit/er/sprz487a/sprz487a.pdf Add implementation to disable MDIO state machine, configure MDIO in manual mode and achieve MDIO read and writes via MDIO Bitbanging Signed-off-by: Ravi Gunasekaran Reported-by: kernel test robot Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: ethernet: ti: am65-cpsw: Fix devlink port register sequence

2022-07-08T00:21:44Z

Renaming interfaces using udevd depends on the interface being registered before its netdev is registered. Otherwise, udevd reads an empty phys_port_name value, resulting in the interface not being renamed. Fix this by registering the interface before registering its netdev by invoking am65_cpsw_nuss_register_devlink() before invoking register_netdev() for the interface. Move the function call to devlink_port_type_eth_set(), invoking it after register_netdev() is invoked, to ensure that netlink notification for the port state change is generated after the netdev is completely initialized. Fixes: 58356eb31d60 ("net: ti: am65-cpsw-nuss: Add devlink support") Signed-off-by: Siddharth Vadapalli Link: https://lore.kernel.org/r/20220706070208.12207-1-s-vadapalli@ti.com Signed-off-by: Jakub Kicinski

net: ethernet: ti: am65-cpsw-nuss: Fix some refcount leaks

2022-05-27T07:00:40Z

of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. am65_cpsw_init_cpts() and am65_cpsw_nuss_probe() don't release the refcount in error case. Add missing of_node_put() to avoid refcount leak. Fixes: b1f66a5bee07 ("net: ethernet: ti: am65-cpsw-nuss: enable packet timestamping support") Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Miaoqian Lin Signed-off-by: David S. Miller

net: ethernet: ti: am65-cpsw: Fix fwnode passed to phylink_create()

2022-05-26T04:49:25Z

am65-cpsw-nuss driver incorrectly uses fwnode member of common ethernet device's "struct device_node" instead of using fwnode member of the port's "struct device_node" in phylink_create(). This results in all ports having the same phy data when there are multiple ports with their phy properties populated in their respective nodes rather than the common ethernet device node. Fix it here by using fwnode member of the port's node. Fixes: e8609e69470f ("net: ethernet: ti: am65-cpsw: Convert to PHYLINK") Signed-off-by: Siddharth Vadapalli Link: https://lore.kernel.org/r/20220524062558.19296-1-s-vadapalli@ti.com Signed-off-by: Jakub Kicinski

ethernet/ti: delete if NULL check befort devm_kfree

2022-05-17T09:19:15Z

devm_kfree check the pointer, there is no need to check before devm_kfree call. This change is to cleanup the code a bit. Signed-off-by: Bernard Zhao Link: https://lore.kernel.org/r/20220516015208.6526-1-bernard@vivo.com Signed-off-by: Paolo Abeni

net: switch to netif_napi_add_tx()

2022-05-05T22:54:12Z

Switch net callers to the new API not requiring the NAPI_POLL_WEIGHT argument. Acked-by: Florian Fainelli Reviewed-by: Alex Elder Acked-by: Mat Martineau Acked-by: Alexandra Winter Link: https://lore.kernel.org/r/20220504163725.550782-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-05-05T20:03:18Z

tools/testing/selftests/net/forwarding/Makefile f62c5acc800e ("selftests/net/forwarding: add missing tests to Makefile") 50fe062c806e ("selftests: forwarding: new test, verify host mdb entries") https://lore.kernel.org/all/20220502111539.0b7e4621@canb.auug.org.au/ Signed-off-by: Jakub Kicinski

net: cpsw: add missing of_node_put() in cpsw_probe_dt()

2022-04-30T12:37:20Z

'tmp_node' need be put before returning from cpsw_probe_dt(), so add missing of_node_put() in error path. Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Signed-off-by: Yang Yingliang Signed-off-by: David S. Miller

eth: cpsw: remove a copy of the NAPI_POLL_WEIGHT define

2022-04-29T10:56:41Z

Defining local versions of NAPI_POLL_WEIGHT with the same values in the drivers just makes refactoring harder. Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller