kernel.git/drivers/net/ethernet/ti, branch linux-3.2.y

davinci_emac.c: Fix IFF_ALLMULTI setup

2013-11-28T14:01:58Z

[ Upstream commit d69e0f7ea95fef8059251325a79c004bac01f018 ] When IFF_ALLMULTI flag is set on interface and IFF_PROMISC isn't, emac_dev_mcast_set should only enable RX of multicasts and reset MACHASH registers. It does this, but afterwards it either sets up multicast MACs filtering or disables RX of multicasts and resets MACHASH registers again, rendering IFF_ALLMULTI flag useless. This patch fixes emac_dev_mcast_set, so that multicast MACs filtering and disabling of RX of multicasts are skipped when IFF_ALLMULTI flag is set. Tested with kernel 2.6.37. Signed-off-by: Mariusz Ceier Acked-by: Mugunthan V N Signed-off-by: David S. Miller Signed-off-by: Ben Hutchings

drivers: net: ethernet: davinci_emac: use netif_wake_queue() while restarting tx queue

2013-04-10T02:20:13Z

commit 7e51cde276ca820d526c6c21cf8147df595a36bf upstream. To restart tx queue use netif_wake_queue() intead of netif_start_queue() so that net schedule will restart transmission immediately which will increase network performance while doing huge data transfers. Reported-by: Dan Franke Suggested-by: Sriramakrishnan A G Signed-off-by: Mugunthan V N Acked-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Ben Hutchings

net: ethernet: davinci_cpdma: decrease the desc count when cleaning up the remaining packets

2012-10-10T02:31:25Z

[ Upstream commit ffb5ba90017505a19e238e986e6d33f09e4df765 ] chan->count is used by rx channel. If the desc count is not updated by the clean up loop in cpdma_chan_stop, the value written to the rxfree register in cpdma_chan_start will be incorrect. Signed-off-by: Tao Hou Signed-off-by: David S. Miller Signed-off-by: Ben Hutchings

davinci_mdio: Fix MDIO timeout check

2012-05-11T12:13:55Z

commit 5b76d0600b2b08eef77f8e9226938b7b6bde3099 upstream. Under heavy load (flood ping) it is possible for the MDIO timeout to expire before the loop checks the GO bit again. This patch adds an additional check whether the operation was done before actually returning -ETIMEDOUT. To reproduce this bug, flood ping the device, e.g., ping -f -l 1000 After some time, a "timed out waiting for user access" warning may appear. And even worse, link may go down since the PHY reported a timeout. Signed-off-by: Christian Riesch Cc: Cyril Chemparathy Signed-off-by: David S. Miller Signed-off-by: Ben Hutchings

davinci_emac: Do not free all rx dma descriptors during init

2012-03-01T00:31:19Z

commit 5d69703263d588dbb03f4e57091afd8942d96e6d upstream. This patch fixes a regression that was introduced by commit 0a5f38467765ee15478db90d81e40c269c8dda20 davinci_emac: Add Carrier Link OK check in Davinci RX Handler Said commit adds a check whether the carrier link is ok. If the link is not ok, the skb is freed and no new dma descriptor added to the rx dma channel. This causes trouble during initialization when the carrier status has not yet been updated. If a lot of packets are received while netif_carrier_ok returns false, all dma descriptors are freed and the rx dma transfer is stopped. The bug occurs when the board is connected to a network with lots of traffic and the ifconfig down/up is done, e.g., when reconfiguring the interface with DHCP. The bug can be reproduced by flood pinging the davinci board while doing ifconfig eth0 down ifconfig eth0 up on the board. After that, the rx path stops working and the overrun value reported by ifconfig is counting up. This patch reverts commit 0a5f38467765ee15478db90d81e40c269c8dda20 and instead issues warnings only if cpdma_chan_submit returns -ENOMEM. Signed-off-by: Christian Riesch Cc: Cyril Chemparathy Cc: Sascha Hauer Tested-by: Rajashekhara, Sudhakar Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

davinci-cpdma: fix locking issue in cpdma_chan_stop

2011-12-19T21:31:13Z

Free the channel lock before calling __cpdma_chan_process to prevent dead lock. Signed-off-by: Ilya Yanok Tested-by: Ameya Palande <2ameya@gmail.com> Signed-off-by: David S. Miller

drivers/net/ethernet/*: Enabled vendor Kconfig options

2011-08-27T07:58:56Z

Based on finds for Stephen Rothwell, where current defconfig's enable a ethernet driver and it is not compiled due to the newly added NET_VENDOR_* component of Kconfig. This patch enables all the "new" Kconfig options so that current defconfig's will continue to compile the expected drivers. In addition, by enabling all the new Kconfig options does not add any un-expected options. CC: Stephen Rothwll Signed-off-by: Jeff Kirsher

net: remove use of ndo_set_multicast_list in drivers

2011-08-18T03:22:03Z

replace it by ndo_set_rx_mode Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller

davinci*/tlan/cpmac: Move the Texas Instruments (TI) drivers

2011-08-12T10:41:10Z

Move the Texas Instruments drivers to drivers/net/ethernet/ti/ and make the necessary Kconfig and Makefile changes. CC: Sriram CC: Vinay Hegde CC: Cyril Chemparathy CC: Samuel Chessman CC: CC: Eugene Konev CC: Florian Fainelli Signed-off-by: Jeff Kirsher