kernel.git/drivers/net/ethernet/stmicro, branch linux-4.9.y

stmmac: fix potential division by 0

2023-01-07T11:07:23Z

[ Upstream commit ede5a389852d3640a28e7187fb32b7f204380901 ] When the MAC is connected to a 10 Mb/s PHY and the PTP clock is derived from the MAC reference clock (default), the clk_ptp_rate becomes too small and the calculated sub second increment becomes 0 when computed by the stmmac_config_sub_second_increment() function within stmmac_init_tstamp_counter(). Therefore, the subsequent div_u64 in stmmac_init_tstamp_counter() operation triggers a divide by 0 exception as shown below. [ 95.062067] socfpga-dwmac ff700000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 95.076440] socfpga-dwmac ff700000.ethernet eth0: PHY [stmmac-0:08] driver [NCN26000] (irq=49) [ 95.095964] dwmac1000: Master AXI performs any burst length [ 95.101588] socfpga-dwmac ff700000.ethernet eth0: No Safety Features support found [ 95.109428] Division by zero in kernel. [ 95.113447] CPU: 0 PID: 239 Comm: ifconfig Not tainted 6.1.0-rc7-centurion3-1.0.3.0-01574-gb624218205b7-dirty #77 [ 95.123686] Hardware name: Altera SOCFPGA [ 95.127695] unwind_backtrace from show_stack+0x10/0x14 [ 95.132938] show_stack from dump_stack_lvl+0x40/0x4c [ 95.137992] dump_stack_lvl from Ldiv0+0x8/0x10 [ 95.142527] Ldiv0 from __aeabi_uidivmod+0x8/0x18 [ 95.147232] __aeabi_uidivmod from div_u64_rem+0x1c/0x40 [ 95.152552] div_u64_rem from stmmac_init_tstamp_counter+0xd0/0x164 [ 95.158826] stmmac_init_tstamp_counter from stmmac_hw_setup+0x430/0xf00 [ 95.165533] stmmac_hw_setup from __stmmac_open+0x214/0x2d4 [ 95.171117] __stmmac_open from stmmac_open+0x30/0x44 [ 95.176182] stmmac_open from __dev_open+0x11c/0x134 [ 95.181172] __dev_open from __dev_change_flags+0x168/0x17c [ 95.186750] __dev_change_flags from dev_change_flags+0x14/0x50 [ 95.192662] dev_change_flags from devinet_ioctl+0x2b4/0x604 [ 95.198321] devinet_ioctl from inet_ioctl+0x1ec/0x214 [ 95.203462] inet_ioctl from sock_ioctl+0x14c/0x3c4 [ 95.208354] sock_ioctl from vfs_ioctl+0x20/0x38 [ 95.212984] vfs_ioctl from sys_ioctl+0x250/0x844 [ 95.217691] sys_ioctl from ret_fast_syscall+0x0/0x4c [ 95.222743] Exception stack(0xd0ee1fa8 to 0xd0ee1ff0) [ 95.227790] 1fa0: 00574c4f be9aeca4 00000003 00008914 be9aeca4 be9aec50 [ 95.235945] 1fc0: 00574c4f be9aeca4 0059f078 00000036 be9aee8c be9aef7a 00000015 00000000 [ 95.244096] 1fe0: 005a01f0 be9aec38 004d7484 b6e67d74 Signed-off-by: Piergiorgio Beruto Fixes: 91a2559c1dc5 ("net: stmmac: Fix sub-second increment") Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/de4c64ccac9084952c56a06a8171d738604c4770.1670678513.git.piergiorgio.beruto@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: stmmac: fix missing pci_disable_device() on error in stmmac_pci_probe()

2022-05-25T06:39:50Z

[ Upstream commit 0807ce0b010418a191e0e4009803b2d74c3245d5 ] Switch to using pcim_enable_device() to avoid missing pci_disable_device(). Reported-by: Hulk Robot Signed-off-by: Yang Yingliang Link: https://lore.kernel.org/r/20220510031316.1780409-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

Revert "net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link"

2022-05-12T10:14:53Z

This reverts commit edba120f094394454f5b9511d04abd7e8c2c31ee which is commit a6aaa00324240967272b451bfa772547bd576ee6 upstream. Pavel reports that it causes boot issues, so revert it for now. Link: https://lore.kernel.org/r/20220429074341.GB1423@amd Reported-by: Pavel Machek Cc: Dinh Nguyen Cc: David S. Miller Cc: Sasha Levin Signed-off-by: Greg Kroah-Hartman

net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link

2022-04-20T07:06:45Z

[ Upstream commit a6aaa00324240967272b451bfa772547bd576ee6 ] When using a fixed-link, the altr_tse_pcs driver crashes due to null-pointer dereference as no phy_device is provided to tse_pcs_fix_mac_speed function. Fix this by adding a check for phy_dev before calling the tse_pcs_fix_mac_speed() function. Also clean up the tse_pcs_fix_mac_speed function a bit. There is no need to check for splitter_base and sgmii_adapter_base because the driver will fail if these 2 variables are not derived from the device tree. Fixes: fb3bbdb85989 ("net: ethernet: Add TSE PCS support to dwmac-socfpga") Signed-off-by: Dinh Nguyen Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: stmmac: Fix unset max_speed difference between DT and non-DT platforms

2022-04-20T07:06:43Z

[ Upstream commit c21cabb0fd0b54b8b54235fc1ecfe1195a23bcb2 ] In commit 9cbadf094d9d ("net: stmmac: support max-speed device tree property"), when DT platforms don't set "max-speed", max_speed is set to -1; for non-DT platforms, it stays the default 0. Prior to commit eeef2f6b9f6e ("net: stmmac: Start adding phylink support"), the check for a valid max_speed setting was to check if it was greater than zero. This commit got it right, but subsequent patches just checked for non-zero, which is incorrect for DT platforms. In commit 92c3807b9ac3 ("net: stmmac: convert to phylink_get_linkmodes()") the conversion switched completely to checking for non-zero value as a valid value, which caused 1000base-T to stop getting advertised by default. Instead of trying to fix all the checks, simply leave max_speed alone if DT property parsing fails. Fixes: 9cbadf094d9d ("net: stmmac: support max-speed device tree property") Fixes: 92c3807b9ac3 ("net: stmmac: convert to phylink_get_linkmodes()") Signed-off-by: Chen-Yu Tsai Acked-by: Russell King (Oracle) Reviewed-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20220331184832.16316-1-wens@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: stmmac: fix return value of __setup handler

2022-03-08T18:00:58Z

commit e01b042e580f1fbf4fd8da467442451da00c7a90 upstream. __setup() handlers should return 1 on success, i.e., the parameter has been handled. A return of 0 causes the "option=value" string to be added to init's environment strings, polluting it. Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.") Fixes: f3240e2811f0 ("stmmac: remove warning when compile as built-in (V2)") Signed-off-by: Randy Dunlap Reported-by: Igor Zhbanov Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Cc: Giuseppe Cavallaro Cc: Alexandre Torgue Cc: Jose Abreu Link: https://lore.kernel.org/r/20220224033536.25056-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: stmmac: allow CSR clock of 300MHz

2021-10-06T08:23:40Z

[ Upstream commit 08dad2f4d541fcfe5e7bfda72cc6314bbfd2802f ] The Synopsys Ethernet IP uses the CSR clock as a base clock for MDC. The divisor used is set in the MAC_MDIO_Address register field CR (Clock Rate) The divisor is there to change the CSR clock into a clock that falls below the IEEE 802.3 specified max frequency of 2.5MHz. If the CSR clock is 300MHz, the code falls back to using the reset value in the MAC_MDIO_Address register, as described in the comment above this code. However, 300MHz is actually an allowed value and the proper divider can be estimated quite easily (it's just 1Hz difference!) A CSR frequency of 300MHz with the maximum clock rate value of 0x5 (STMMAC_CSR_250_300M, a divisor of 124) gives somewhere around ~2.42MHz which is below the IEEE 802.3 specified maximum. For the ARTPEC-8 SoC, the CSR clock is this problematic 300MHz, and unfortunately, the reset-value of the MAC_MDIO_Address CR field is 0x0. This leads to a clock rate of zero and a divisor of 42, and gives an MDC frequency of ~7.14MHz. Allow CSR clock of 300MHz by making the comparison inclusive. Signed-off-by: Jesper Nilsson Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: ethernet: stmmac: Do not use unreachable() in ipq806x_gmac_probe()

2021-09-22T09:43:07Z

[ Upstream commit 4367355dd90942a71641c98c40c74589c9bddf90 ] When compiling with clang in certain configurations, an objtool warning appears: drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.o: warning: objtool: ipq806x_gmac_probe() falls through to next function phy_modes() This happens because the unreachable annotation in the third switch statement is not eliminated. The compiler should know that the first default case would prevent the second and third from being reached as the comment notes but sanitizer options can make it harder for the compiler to reason this out. Help the compiler out by eliminating the unreachable() annotation and unifying the default case error handling so that there is no objtool warning, the meaning of the code stays the same, and there is less duplication. Reported-by: Sami Tolvanen Tested-by: Sami Tolvanen Signed-off-by: Nathan Chancellor Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: stmmac: dwmac1000: Fix extended MAC address registers definition

2021-06-30T12:49:14Z

[ Upstream commit 1adb20f0d496b2c61e9aa1f4761b8d71f93d258e ] The register starts from 0x800 is the 16th MAC address register rather than the first one. Fixes: cffb13f4d6fb ("stmmac: extend mac addr reg and fix perfect filering") Signed-off-by: Jisheng Zhang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: stmicro: handle clk_prepare() failure during init

2021-05-26T09:29:08Z

commit 0c32a96d000f260b5ebfabb4145a86ae1cd71847 upstream. In case clk_prepare() fails, capture and propagate the error code up the stack. If regulator_enable() was called earlier, properly unwind it by calling regulator_disable(). Signed-off-by: Anirudh Rayabharam Cc: David S. Miller Cc: stable Link: https://lore.kernel.org/r/20210503115736.2104747-22-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman