kernel.git/drivers/net/ethernet/smsc, branch linux-4.4.y

drivers: net: smc911x: Check for error irq

2021-12-29T10:50:30Z

[ Upstream commit cb93b3e11d405f20a405a07482d01147ef4934a3 ] Because platform_get_irq() could fail and return error irq. Therefore, it might be better to check it if order to avoid the use of error irq. Fixes: ae150435b59e ("smsc: Move the SMC (SMSC) drivers") Signed-off-by: Jiasheng Jiang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: smc91x: Fix possible memory leak in smc_drv_probe()

2020-07-31T14:43:13Z

[ Upstream commit bca9749b1aa23d964d3ab930938af66dbf887f15 ] If try_toggle_control_gpio() failed in smc_drv_probe(), free_netdev(ndev) should be called to free the ndev created earlier. Otherwise, a memleak will occur. Fixes: 7d2911c43815 ("net: smc91x: Fix gpios for device tree based booting") Reported-by: Hulk Robot Signed-off-by: Wang Hai Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: smc911x: Adjust indentation in smc911x_phy_configure

2020-02-14T21:29:59Z

commit 5c61e223004b3b5c3f1dd25718e979bc17a3b12d upstream. Clang warns: ../drivers/net/ethernet/smsc/smc911x.c:939:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] if (!lp->ctl_rfduplx) ^ ../drivers/net/ethernet/smsc/smc911x.c:936:2: note: previous statement is here if (lp->ctl_rspeed != 100) ^ 1 warning generated. This warning occurs because there is a space after the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. Fixes: 0a0c72c9118c ("[PATCH] RE: [PATCH 1/1] net driver: Add support for SMSC LAN911x line of ethernet chips") Link: https://github.com/ClangBuiltLinux/linux/issues/796 Signed-off-by: Nathan Chancellor Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: smsc: fix return type of ndo_start_xmit function

2019-11-25T14:54:15Z

[ Upstream commit 6323d57f335ce1490d025cacc83fc10b07792130 ] The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

smc91x: avoid self-comparison warning

2016-11-10T15:36:36Z

commit e3ebd894f084255fde19116955ba7054858ff5d6 upstream. The smc91x driver defines a macro that compares its argument to itself, apparently to get a true result while using its argument to avoid a warning about unused local variables. Unfortunately, this triggers a warning with gcc-6, as the comparison is obviously useless: drivers/net/ethernet/smsc/smc91x.c: In function 'smc_hardware_send_pkt': drivers/net/ethernet/smsc/smc91x.c:563:14: error: self-comparison always evaluates to true [-Werror=tautological-compare] if (!smc_special_trylock(&lp->lock, flags)) { This replaces the macro with another one that behaves similarly, with a cast to (void) to ensure the argument is used, and using a literal 'true' as its value. Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: smc91x: fix SMC accesses

2016-09-30T08:18:37Z

[ Upstream commit 2fb04fdf30192ff1e2b5834e9b7745889ea8bbcb ] Commit b70661c70830 ("net: smc91x: use run-time configuration on all ARM machines") broke some ARM platforms through several mistakes. Firstly, the access size must correspond to the following rule: (a) at least one of 16-bit or 8-bit access size must be supported (b) 32-bit accesses are optional, and may be enabled in addition to the above. Secondly, it provides no emulation of 16-bit accesses, instead blindly making 16-bit accesses even when the platform specifies that only 8-bit is supported. Reorganise smc91x.h so we can make use of the existing 16-bit access emulation already provided - if 16-bit accesses are supported, use 16-bit accesses directly, otherwise if 8-bit accesses are supported, use the provided 16-bit access emulation. If neither, BUG(). This exactly reflects the driver behaviour prior to the commit being fixed. Since the conversion incorrectly cut down the available access sizes on several platforms, we also need to go through every platform and fix up the overly-restrictive access size: Arnd assumed that if a platform can perform 32-bit, 16-bit and 8-bit accesses, then only a 32-bit access size needed to be specified - not so, all available access sizes must be specified. This likely fixes some performance regressions in doing this: if a platform does not support 8-bit accesses, 8-bit accesses have been emulated by performing a 16-bit read-modify-write access. Tested on the Intel Assabet/Neponset platform, which supports only 8-bit accesses, which was broken by the original commit. Fixes: b70661c70830 ("net: smc91x: use run-time configuration on all ARM machines") Signed-off-by: Russell King Tested-by: Robert Jarzmik Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: smsc911x: Reset PHY during initialization

2015-11-16T19:43:14Z

On certain hardware after software reboot the chip may get stuck and fail to reinitialize during reset. This can be fixed by ensuring that PHY is reset too. Old PHY resetting method required operational MDIO interface, therefore the chip should have been already set up. In order to be able to function during probe, it is changed to use PMT_CTRL register. The problem could be observed on SMDK5410 board. Signed-off-by: Pavel Fedin Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2015-11-03T18:41:45Z

Minor overlapping changes in net/ipv4/ipmr.c, in 'net' we were fixing the "BH-ness" of the counter bumps whilst in 'net-next' the functions were modified to take an explicit 'net' parameter. Signed-off-by: David S. Miller

net: smsc911x: Fix crash if loopback test fails

2015-11-01T17:05:24Z

On certain hardware in certain situations loopback test fails and the driver gets removed. During mdiobus_unregister() instance of PHY driver gets disposed. But by this time it has already been started using phy_connect_direct(). PHY driver uses DELAYED_WORK in order to maintain its state. Attempting to dispose the driver without calling phy_disconnect() causes deallocation of DELAYED_WORK being active. This shortly causes a bad crash in timer code. The problem can be discovered by enabling CONFIG_DEBUG_OBJECTS_TIMERS and CONFIG_DEBUG_OBJECTS_FREE Signed-off-by: Pavel Fedin Signed-off-by: David S. Miller

net: smc91x: convert pxa dma to dmaengine

2015-09-17T20:36:52Z

Convert the dma transfers to be dmaengine based, now pxa has a dmaengine slave driver. This makes this driver a bit more PXA agnostic. The driver was tested on pxa27x (mainstone) and pxa310 (zylonite), ie. only pxa platforms. Signed-off-by: Robert Jarzmik Cc: Russell King Cc: Arnd Bergmann Signed-off-by: David S. Miller