kernel.git/drivers/net/ethernet/sis, branch linux-4.9.y

sis900: Fix missing pci_disable_device() in probe and remove

2021-08-04T09:58:04Z

[ Upstream commit 89fb62fde3b226f99b7015280cf132e2a7438edf ] Replace pci_enable_device() with pcim_enable_device(), pci_disable_device() and pci_release_regions() will be called in release automatically. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot Signed-off-by: Wang Hai Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

sis900: fix TX completion

2019-07-21T07:06:06Z

[ Upstream commit 8ac8a01092b2added0749ef937037bf1912e13e3 ] Since commit 605ad7f184b60cfaacbc038aa6c55ee68dee3c89 "tcp: refine TSO autosizing", outbound throughput is dramatically reduced for some connections, as sis900 is doing TX completion within idle states only. Make TX completion happen after every transmitted packet. Test: netperf before patch: > netperf -H remote -l -2000000 -- -s 1000000 MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 327680 327680 253.44 0.06 after patch: > netperf -H remote -l -10000000 -- -s 1000000 MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 327680 327680 5.38 14.89 Thx to Dave Miller and Eric Dumazet for helpful hints Signed-off-by: Sergej Benilov Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

sis900: use IS_ENABLED() instead of checking for built-in or module

2016-09-13T03:27:59Z

The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Using the macro makes the code more readable by helping abstract away some of the Kconfig built-in and module enable details. Signed-off-by: Javier Martinez Canillas Acked-by: Daniele Venzano Signed-off-by: David S. Miller

treewide: replace dev->trans_start update with helper

2016-05-04T18:16:49Z

Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Florian Westphal Acked-by: Felipe Balbi Acked-by: Mugunthan V N Acked-by: Antonio Quartulli Signed-off-by: David S. Miller

sis900: Trivial: Fix typos in enums

2015-06-29T19:52:06Z

"reigster" -> "register" Signed-off-by: Nik Nyby Signed-off-by: David S. Miller

drivers/net: remove all references to obsolete Ethernet-HOWTO

2015-06-23T13:50:35Z

This howto made sense in the 1990s when users had to manually configure ISA cards with jumpers or vendor utilities, but with the implementation of PCI it became increasingly less and less relevant, to the point where it has been well over a decade since I last updated it. And there is no value in anyone else taking over updating it either. However the references to it continue to spread as boiler plate text from one Kconfig file into the next. We are not doing end users any favours by pointing them at this old document, so lets kill it with fire, once and for all, to hopefully stop any further spread. No code is changed in this commit, just Kconfig help text. Signed-off-by: Paul Gortmaker Signed-off-by: David S. Miller

PCI: Remove DEFINE_PCI_DEVICE_TABLE macro use

2014-08-12T18:15:14Z

We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine Signed-off-by: Bjorn Helgaas

sis900: remove unnecessary break after return

2014-07-21T04:30:18Z

Signed-off-by: Fabian Frederick Signed-off-by: David S. Miller

net: get rid of SET_ETHTOOL_OPS

2014-05-13T21:43:20Z

net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller Signed-off-by: Wilfried Klaebe Acked-by: Felipe Balbi Signed-off-by: David S. Miller

sis900: Call dev_kfree_skb_any instead of dev_kfree_skb.

2014-03-25T04:19:09Z

Replace dev_kfree_skb with dev_kfree_skb_any in functions that can be called in hard irq and other contexts. Signed-off-by: "Eric W. Biederman"