kernel.git/drivers/net/ethernet/sfc, branch linux-5.0.y

sfc: initialise found bitmap in efx_ef10_mtd_probe

2019-02-12T16:49:21Z

The bitmap of found partitions in efx_ef10_mtd_probe was not initialised, causing partitions to be suppressed based off whatever value was in the bitmap at the start. Fixes: 3366463513f5 ("sfc: suppress duplicate nvmem partition types in efx_ef10_mtd_probe") Signed-off-by: Bert Kenward Signed-off-by: David S. Miller

sfc: suppress duplicate nvmem partition types in efx_ef10_mtd_probe

2019-01-23T19:15:35Z

Use a bitmap to keep track of which partition types we've already seen; for duplicates, return -EEXIST from efx_ef10_mtd_probe_partition() and thus skip adding that partition. Duplicate partitions occur because of the A/B backup scheme used by newer sfc NICs. Prior to this patch they cause sysfs_warn_dup errors because they have the same name, causing us not to expose any MTDs at all. Signed-off-by: Edward Cree Signed-off-by: David S. Miller

cross-tree: phase out dma_zalloc_coherent()

2019-01-08T12:58:37Z

We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig Signed-off-by: Luis Chamberlain [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2018-12-27T21:04:52Z

Pull networking updates from David Miller: 1) New ipset extensions for matching on destination MAC addresses, from Stefano Brivio. 2) Add ipv4 ttl and tos, plus ipv6 flow label and hop limit offloads to nfp driver. From Stefano Brivio. 3) Implement GRO for plain UDP sockets, from Paolo Abeni. 4) Lots of work from Michał Mirosław to eliminate the VLAN_TAG_PRESENT bit so that we could support the entire vlan_tci value. 5) Rework the IPSEC policy lookups to better optimize more usecases, from Florian Westphal. 6) Infrastructure changes eliminating direct manipulation of SKB lists wherever possible, and to always use the appropriate SKB list helpers. This work is still ongoing... 7) Lots of PHY driver and state machine improvements and simplifications, from Heiner Kallweit. 8) Various TSO deferral refinements, from Eric Dumazet. 9) Add ntuple filter support to aquantia driver, from Dmitry Bogdanov. 10) Batch dropping of XDP packets in tuntap, from Jason Wang. 11) Lots of cleanups and improvements to the r8169 driver from Heiner Kallweit, including support for ->xmit_more. This driver has been getting some much needed love since he started working on it. 12) Lots of new forwarding selftests from Petr Machata. 13) Enable VXLAN learning in mlxsw driver, from Ido Schimmel. 14) Packed ring support for virtio, from Tiwei Bie. 15) Add new Aquantia AQtion USB driver, from Dmitry Bezrukov. 16) Add XDP support to dpaa2-eth driver, from Ioana Ciocoi Radulescu. 17) Implement coalescing on TCP backlog queue, from Eric Dumazet. 18) Implement carrier change in tun driver, from Nicolas Dichtel. 19) Support msg_zerocopy in UDP, from Willem de Bruijn. 20) Significantly improve garbage collection of neighbor objects when the table has many PERMANENT entries, from David Ahern. 21) Remove egdev usage from nfp and mlx5, and remove the facility completely from the tree as it no longer has any users. From Oz Shlomo and others. 22) Add a NETDEV_PRE_CHANGEADDR so that drivers can veto the change and therefore abort the operation before the commit phase (which is the NETDEV_CHANGEADDR event). From Petr Machata. 23) Add indirect call wrappers to avoid retpoline overhead, and use them in the GRO code paths. From Paolo Abeni. 24) Add support for netlink FDB get operations, from Roopa Prabhu. 25) Support bloom filter in mlxsw driver, from Nir Dotan. 26) Add SKB extension infrastructure. This consolidates the handling of the auxiliary SKB data used by IPSEC and bridge netfilter, and is designed to support the needs to MPTCP which could be integrated in the future. 27) Lots of XDP TX optimizations in mlx5 from Tariq Toukan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1845 commits) net: dccp: fix kernel crash on module load drivers/net: appletalk/cops: remove redundant if statement and mask bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw net/net_namespace: Check the return value of register_pernet_subsys() net/netlink_compat: Fix a missing check of nla_parse_nested ieee802154: lowpan_header_create check must check daddr net/mlx4_core: drop useless LIST_HEAD mlxsw: spectrum: drop useless LIST_HEAD net/mlx5e: drop useless LIST_HEAD iptunnel: Set tun_flags in the iptunnel_metadata_reply from src net/mlx5e: fix semicolon.cocci warnings staging: octeon: fix build failure with XFRM enabled net: Revert recent Spectre-v1 patches. can: af_can: Fix Spectre v1 vulnerability packet: validate address length if non-zero nfc: af_nfc: Fix Spectre v1 vulnerability phonet: af_phonet: Fix Spectre v1 vulnerability net: core: Fix Spectre v1 vulnerability net: minor cleanup in skb_ext_add() net: drop the unused helper skb_ext_get() ...

net: core: dev: Add extack argument to dev_open()

2018-12-06T21:26:06Z

In order to pass extack together with NETDEV_PRE_UP notifications, it's necessary to route the extack to __dev_open() from diverse (possibly indirect) callers. One prominent API through which the notification is invoked is dev_open(). Therefore extend dev_open() with and extra extack argument and update all users. Most of the calls end up just encoding NULL, but bond and team drivers have the extack readily available. Signed-off-by: Petr Machata Acked-by: Jiri Pirko Reviewed-by: Ido Schimmel Reviewed-by: David Ahern Signed-off-by: David S. Miller

sfc: Replace spin_is_locked() with lockdep

2018-11-12T17:06:22Z

lockdep_assert_held() is better suited to checking locking requirements, since it only checks if the current thread holds the lock regardless of whether someone else does. This is also a step towards possibly removing spin_is_locked(). Signed-off-by: Lance Roy Cc: Solarflare linux maintainers Cc: Bert Kenward Cc: "David S. Miller" Cc: Signed-off-by: Paul E. McKenney Acked-by: Edward Cree

sfc: use the new __netdev_tx_sent_queue BQL optimisation

2018-11-09T04:01:29Z

As added in 3e59020abf0f ("net: bql: add __netdev_tx_sent_queue()"), which see for performance rationale. Signed-off-by: Edward Cree Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller

sfc: add missing NVRAM partition types for EF10

2018-11-08T06:58:00Z

Expose the MUM/SUC Firmware, UEFI Expansion ROM and MC Status partitions of the NIC's NVRAM as MTDs if found on the NIC. The first two are needed in order to properly update them when performing firmware updates; the MC Status partition is used to determine whether a signed firmware image was accepted or rejected by a Secure NIC. Signed-off-by: Edward Cree Signed-off-by: David S. Miller

Merge tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2018-10-25T13:50:48Z

Pull PCI updates from Bjorn Helgaas: - Fix ASPM link_state teardown on removal (Lukas Wunner) - Fix misleading _OSC ASPM message (Sinan Kaya) - Make _OSC optional for PCI (Sinan Kaya) - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set (Patrick Talbert) - Remove x86 and arm64 node-local allocation for host bridge structures (Punit Agrawal) - Pay attention to device-specific _PXM node values (Jonathan Cameron) - Support new Immediate Readiness bit (Felipe Balbi) - Differentiate between pciehp surprise and safe removal (Lukas Wunner) - Remove unnecessary pciehp includes (Lukas Wunner) - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner) - Tolerate PCIe Slot Presence Detect being hardwired to zero to workaround broken hardware, e.g., the Wilocity switch/wireless device (Lukas Wunner) - Unify pciehp controller & slot structs (Lukas Wunner) - Constify hotplug_slot_ops (Lukas Wunner) - Drop hotplug_slot_info (Lukas Wunner) - Embed hotplug_slot struct into users instead of allocating it separately (Lukas Wunner) - Initialize PCIe port service drivers directly instead of relying on initcall ordering (Keith Busch) - Restore PCI config state after a slot reset (Keith Busch) - Save/restore DPC config state along with other PCI config state (Keith Busch) - Reference count devices during AER handling to avoid race issue with concurrent hot removal (Keith Busch) - If an Upstream Port reports ERR_FATAL, don't try to read the Port's config space because it is probably unreachable (Keith Busch) - During error handling, use slot-specific reset instead of secondary bus reset to avoid link up/down issues on hotplug ports (Keith Busch) - Restore previous AER/DPC handling that does not remove and re-enumerate devices on ERR_FATAL (Keith Busch) - Notify all drivers that may be affected by error recovery resets (Keith Busch) - Always generate error recovery uevents, even if a driver doesn't have error callbacks (Keith Busch) - Make PCIe link active reporting detection generic (Keith Busch) - Support D3cold in PCIe hierarchies during system sleep and runtime, including hotplug and Thunderbolt ports (Mika Westerberg) - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots are empty or occupied (Jon Derrick) - Remove duplicated include from pci/pcie/err.c and unused variable from cpqphp (YueHaibing) - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza Pawandeep) - Uninline PCI bus accessors for better ftracing (Keith Busch) - Remove unused AER Root Port .error_resume method (Keith Busch) - Use kfifo in AER instead of a local version (Keith Busch) - Use threaded IRQ in AER bottom half (Keith Busch) - Use managed resources in AER core (Keith Busch) - Reuse pcie_port_find_device() for AER injection (Keith Busch) - Abstract AER interrupt handling to disconnect error injection (Keith Busch) - Refactor AER injection callbacks to simplify future improvments (Keith Busch) - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski) - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko) - Add switch fall-through annotations (Gustavo A. R. Silva) - Remove unused Switchtec quirk variable (Joshua Abraham) - Fix pci.c kernel-doc warning (Randy Dunlap) - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig) - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng) - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid useless dmesg errors (Logan Gunthorpe) - Update Switchtec NTB documentation (Wesley Yung) - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz) - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang) - Add PCI support for peer-to-peer DMA (Logan Gunthorpe) - Add sysfs group for PCI peer-to-peer memory statistics (Logan Gunthorpe) - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan Gunthorpe) - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan Gunthorpe) - Add PCI peer-to-peer DMA driver writer's documentation (Logan Gunthorpe) - Add block layer flag to indicate driver support for PCI peer-to-peer DMA (Logan Gunthorpe) - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P memory (Logan Gunthorpe) - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan Gunthorpe) - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan Gunthorpe) - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise, Christoph Hellwig, Logan Gunthorpe) - Cache VF config space size to optimize enumeration of many VFs (KarimAllah Ahmed) - Remove unnecessary include (Bjorn Helgaas) - Fix VMD AERSID quirk Device ID matching (Jon Derrick) - Fix Cadence PHY handling during probe (Alan Douglas) - Signal Cadence Endpoint interrupts via AXI region 0 instead of last region (Alan Douglas) - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan Douglas) - Remove redundant controller tests for "device_type == pci" (Rob Herring) - Document R-Car E3 (R8A77990) bindings (Tho Vu) - Add device tree support for R-Car r8a7744 (Biju Das) - Drop unused mvebu PCIe capability code (Thomas Petazzoni) - Add shared PCI bridge emulation code (Thomas Petazzoni) - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni) - Add aardvark Root Port emulation (Thomas Petazzoni) - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach) - Add initial power management for i.MX7 (Leonard Crestez) - Add PME_Turn_Off support for i.MX7 (Leonard Crestez) - Fix qcom runtime power management error handling (Bjorn Andersson) - Update TI dra7xx unaligned access errata workaround for host mode as well as endpoint mode (Vignesh R) - Fix kirin section mismatch warning (Nathan Chancellor) - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare) - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I) - Update Keystone to use MRRS quirk for host bridge instead of open coding (Kishon Vijay Abraham I) - Refactor Keystone link establishment (Kishon Vijay Abraham I) - Simplify and speed up Keystone link training (Kishon Vijay Abraham I) - Remove unused Keystone host_init argument (Kishon Vijay Abraham I) - Merge Keystone driver files into one (Kishon Vijay Abraham I) - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay Abraham I) - Rename Keystone functions for uniformity (Kishon Vijay Abraham I) - Add Keystone device control module DT binding (Kishon Vijay Abraham I) - Use SYSCON API to get Keystone control module device IDs (Kishon Vijay Abraham I) - Clean up Keystone PHY handling (Kishon Vijay Abraham I) - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I) - Clean up Keystone config space access checks (Kishon Vijay Abraham I) - Get Keystone outbound window count from DT (Kishon Vijay Abraham I) - Clean up Keystone outbound window configuration (Kishon Vijay Abraham I) - Clean up Keystone DBI setup (Kishon Vijay Abraham I) - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I) - Fix Keystone IRQ status checking (Kishon Vijay Abraham I) - Add debug messages for all Keystone errors (Kishon Vijay Abraham I) - Clean up Keystone includes and macros (Kishon Vijay Abraham I) - Fix Mediatek unchecked return value from devm_pci_remap_iospace() (Gustavo A. R. Silva) - Fix Mediatek endpoint/port matching logic (Honghui Zhang) - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui Zhang) - Remove redundant Mediatek PM domain check (Honghui Zhang) - Convert Mediatek to pci_host_probe() (Honghui Zhang) - Fix Mediatek MSI enablement (Honghui Zhang) - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang) - Add Mediatek loadable module support (Honghui Zhang) - Detach VMD resources after stopping root bus to prevent orphan resources (Jon Derrick) - Convert pcitest build process to that used by other tools (iio, perf, etc) (Gustavo Pimentel) * tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI/AER: Refactor error injection fallbacks PCI/AER: Abstract AER interrupt handling PCI/AER: Reuse existing pcie_port_find_device() interface PCI/AER: Use managed resource allocations PCI: pcie: Remove redundant 'default n' from Kconfig PCI: aardvark: Implement emulated root PCI bridge config space PCI: mvebu: Convert to PCI emulated bridge config space PCI: mvebu: Drop unused PCI express capability code PCI: Introduce PCI bridge emulated config space common logic PCI: vmd: Detach resources after stopping root bus nvmet: Optionally use PCI P2P memory nvmet: Introduce helper functions to allocate and free request SGLs nvme-pci: Add support for P2P memory in requests nvme-pci: Use PCI p2pmem subsystem to manage the CMB IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]() block: Add PCI P2P flag for request queue PCI/P2PDMA: Add P2P DMA driver writer's documentation docs-rst: Add a new directory for PCI documentation PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset ...

PCI/AER: Remove pci_cleanup_aer_uncorrect_error_status() calls

2018-10-02T21:04:40Z

After bfcb79fca19d ("PCI/ERR: Run error recovery callbacks for all affected devices"), AER errors are always cleared by the PCI core and drivers don't need to do it themselves. Remove calls to pci_cleanup_aer_uncorrect_error_status() from device driver error recovery functions. Signed-off-by: Oza Pawandeep [bhelgaas: changelog, remove PCI core changes, remove unused variables] Signed-off-by: Bjorn Helgaas