kernel.git/drivers/net/ethernet/realtek, branch linux-6.17.y

r8169: fix RTL8127 hang on suspend/shutdown

2025-12-06T21:27:37Z

commit ae1737e7339b513f8c2fc21b500a0fc215d155c3 upstream. There have been reports that RTL8127 hangs on suspend and shutdown, partially disappearing from lspci until power-cycling. According to Realtek disabling PLL's when switching to D3 should be avoided on that chip version. Fix this by aligning disabling PLL's with the vendor drivers, what in addition results in PLL's not being disabled when switching to D3hot on other chip versions. Fixes: f24f7b2f3af9 ("r8169: add support for RTL8127A") Tested-by: Fabio Baltieri Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit Link: https://patch.msgid.link/d7faae7e-66bc-404a-a432-3a496600575f@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

r8169: set EEE speed down ratio to 1

2025-11-13T20:37:28Z

[ Upstream commit bf7154ffb1c65a201906296a9d3eb22e9daa5ffc ] EEE speed down means speed down MAC MCU clock. It is not from spec. It is kind of Realtek specific power saving feature. But enable it may cause some issues, like packet drop or interrupt loss. Different hardware may have different issues. EEE speed down ratio (mac ocp 0xe056[7:4]) is used to set EEE speed down rate. The larger this value is, the more power can save. But it actually save less power then we expected. And, as mentioned above, will impact compatibility. So set it to 1 (mac ocp 0xe056[7:4] = 0) , which means not to speed down, to improve compatibility. Signed-off-by: ChunHao Lin Reviewed-by: Heiner Kallweit Link: https://patch.msgid.link/20250918023425.3463-1-hau@realtek.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

eth: 8139too: Make 8139TOO_PIO depend on !NO_IOPORT_MAP

2025-11-13T20:37:20Z

[ Upstream commit 43adad382e1fdecabd2c4cd2bea777ef4ce4109e ] When 8139too is probing and 8139TOO_PIO=y it will call pci_iomap_range() and from there __pci_ioport_map() for the PCI IO space. If HAS_IOPORT_MAP=n and NO_GENERIC_PCI_IOPORT_MAP=n, like it is on my m68k config, __pci_ioport_map() becomes NULL, pci_iomap_range() will always fail and the driver will complain it couldn't map the PIO space and return an error. NO_IOPORT_MAP seems to cover the case where what 8139too is trying to do cannot ever work so make 8139TOO_PIO depend on being it false and avoid creating an unusable driver. Signed-off-by: Daniel Palmer Link: https://patch.msgid.link/20250907064349.3427600-1-daniel@thingy.jp Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

r8169: fix packet truncation after S4 resume on RTL8168H/RTL8111H

2025-10-23T14:24:29Z

[ Upstream commit 70f92ab97042f243e1c8da1c457ff56b9b3e49f1 ] After resume from S4 (hibernate), RTL8168H/RTL8111H truncates incoming packets. Packet captures show messages like "IP truncated-ip - 146 bytes missing!". The issue is caused by RxConfig not being properly re-initialized after resume. Re-initializing the RxConfig register before the chip re-initialization sequence avoids the truncation and restores correct packet reception. This follows the same pattern as commit ef9da46ddef0 ("r8169: fix data corruption issue on RTL8402"). Fixes: 6e1d0b898818 ("r8169:add support for RTL8168H and RTL8107E") Signed-off-by: Linmao Li Reviewed-by: Jacob Keller Reviewed-by: Heiner Kallweit Link: https://patch.msgid.link/20251009122549.3955845-1-lilinmao@kylinos.cn Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

rtase: Fix Rx descriptor CRC error bit definition

2025-08-15T00:53:12Z

The CRC error bit is located at bit 17 in the Rx descriptor, but the driver was incorrectly using bit 16. Fix it. Fixes: a36e9f5cfe9e ("rtase: Add support for a pci table in this module") Signed-off-by: Justin Lai Link: https://patch.msgid.link/20250813071631.7566-1-justinlai0215@realtek.com Signed-off-by: Jakub Kicinski

rtase: Link queues to NAPI instances

2025-06-17T23:24:09Z

Link queues to NAPI instances with netif_queue_set_napi. This information can be queried with the netdev-genl API. Signed-off-by: Justin Lai Reviewed-by: Joe Damato Link: https://patch.msgid.link/20250616032226.7318-3-justinlai0215@realtek.com Signed-off-by: Jakub Kicinski

rtase: Link IRQs to NAPI instances

2025-06-17T23:24:09Z

Link IRQs to NAPI instances with netif_napi_set_irq. This information can be queried with the netdev-genl API. Also add support for persistent NAPI configuration using netif_napi_add_config(). Signed-off-by: Justin Lai Reviewed-by: Joe Damato Link: https://patch.msgid.link/20250616032226.7318-2-justinlai0215@realtek.com Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2025-06-12T17:09:10Z

Cross-merge networking fixes after downstream PR (net-6.16-rc2). No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski

r8169: remove redundant pci_tbl entry

2025-06-11T21:06:35Z

This entry is covered by the entry in the next line already. Signed-off-by: Heiner Kallweit Link: https://patch.msgid.link/2d81fe20-f71d-4483-817d-d46f9ec88cce@gmail.com Signed-off-by: Jakub Kicinski

r8169: enable EEE at 5Gbps on RTL8126

2025-06-11T21:06:13Z

According to Realtek [0] it's safe to enable EEE at 5Gbps on RTL8126. [0] https://www.spinics.net/lists/netdev/msg1091873.html Signed-off-by: Heiner Kallweit Link: https://patch.msgid.link/18ce0996-0182-4a11-a93a-df14b0e6876c@gmail.com Signed-off-by: Jakub Kicinski