kernel.git/drivers/net/ethernet/nxp, branch linux-5.14.y

net: nxp: lpc_eth.c: avoid hang when bringing interface down

2021-11-02T18:50:58Z

commit ace19b992436a257d9a793672e57abc28fe83e2e upstream. A hard hang is observed whenever the ethernet interface is brought down. If the PHY is stopped before the LPC core block is reset, the SoC will hang. Comparing lpc_eth_close() and lpc_eth_open() I re-arranged the ordering of the functions calls in lpc_eth_close() to reset the hardware before stopping the PHY. Fixes: b7370112f519 ("lpc32xx: Added ethernet driver") Signed-off-by: Trevor Woerner Acked-by: Vladimir Zapolskiy Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

of: net: pass the dst buffer to of_get_mac_address()

2021-04-13T21:35:02Z

of_get_mac_address() returns a "const void*" pointer to a MAC address. Lately, support to fetch the MAC address by an NVMEM provider was added. But this will only work with platform devices. It will not work with PCI devices (e.g. of an integrated root complex) and esp. not with DSA ports. There is an of_* variant of the nvmem binding which works without devices. The returned data of a nvmem_cell_read() has to be freed after use. On the other hand the return of_get_mac_address() points to some static data without a lifetime. The trick for now, was to allocate a device resource managed buffer which is then returned. This will only work if we have an actual device. Change it, so that the caller of of_get_mac_address() has to supply a buffer where the MAC address is written to. Unfortunately, this will touch all drivers which use the of_get_mac_address(). Usually the code looks like: const char *addr; addr = of_get_mac_address(np); if (!IS_ERR(addr)) ether_addr_copy(ndev->dev_addr, addr); This can then be simply rewritten as: of_get_mac_address(np, ndev->dev_addr); Sometimes is_valid_ether_addr() is used to test the MAC address. of_get_mac_address() already makes sure, it just returns a valid MAC address. Thus we can just test its return code. But we have to be careful if there are still other sources for the MAC address before the of_get_mac_address(). In this case we have to keep the is_valid_ether_addr() call. The following coccinelle patch was used to convert common cases to the new style. Afterwards, I've manually gone over the drivers and fixed the return code variable: either used a new one or if one was already available use that. Mansour Moufid, thanks for that coccinelle patch! @a@ identifier x; expression y, z; @@ - x = of_get_mac_address(y); + x = of_get_mac_address(y, z); <... - ether_addr_copy(z, x); ...> @@ identifier a.x; @@ - if (<+... x ...+>) {} @@ identifier a.x; @@ if (<+... x ...+>) { ... } - else {} @@ identifier a.x; expression e; @@ - if (<+... x ...+>@e) - {} - else + if (!(e)) {...} @@ expression x, y, z; @@ - x = of_get_mac_address(y, z); + of_get_mac_address(y, z); ... when != x All drivers, except drivers/net/ethernet/aeroflex/greth.c, were compile-time tested. Suggested-by: Andrew Lunn Signed-off-by: Michael Walle Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: lpc_eth: fix format warnings of block comments

2021-03-31T21:34:09Z

Fix the following format warning: 1. Block comments use * on subsequent lines 2. Block comments use a trailing */ on a separate line Signed-off-by: Yangyang Li Signed-off-by: Weihang Li Signed-off-by: David S. Miller

ethernet: select CONFIG_CRC32 as needed

2020-12-04T22:42:21Z

A number of ethernet drivers require crc32 functionality to be avaialable in the kernel, causing a link error otherwise: arm-linux-gnueabi-ld: drivers/net/ethernet/agere/et131x.o: in function `et1310_setup_device_for_multicast': et131x.c:(.text+0x5918): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/cadence/macb_main.o: in function `macb_start_xmit': macb_main.c:(.text+0x4b88): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/faraday/ftgmac100.o: in function `ftgmac100_set_rx_mode': ftgmac100.c:(.text+0x2b38): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fec_main.o: in function `set_multicast_list': fec_main.c:(.text+0x6120): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fman/fman_dtsec.o: in function `dtsec_add_hash_mac_address': fman_dtsec.c:(.text+0x830): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/freescale/fman/fman_dtsec.o:fman_dtsec.c:(.text+0xb68): more undefined references to `crc32_le' follow arm-linux-gnueabi-ld: drivers/net/ethernet/netronome/nfp/nfpcore/nfp_hwinfo.o: in function `nfp_hwinfo_read': nfp_hwinfo.c:(.text+0x250): undefined reference to `crc32_be' arm-linux-gnueabi-ld: nfp_hwinfo.c:(.text+0x288): undefined reference to `crc32_be' arm-linux-gnueabi-ld: drivers/net/ethernet/netronome/nfp/nfpcore/nfp_resource.o: in function `nfp_resource_acquire': nfp_resource.c:(.text+0x144): undefined reference to `crc32_be' arm-linux-gnueabi-ld: nfp_resource.c:(.text+0x158): undefined reference to `crc32_be' arm-linux-gnueabi-ld: drivers/net/ethernet/nxp/lpc_eth.o: in function `lpc_eth_set_multicast_list': lpc_eth.c:(.text+0x1934): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_flow_tbl_do': rocker_ofdpa.c:(.text+0x2e08): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_flow_tbl_del': rocker_ofdpa.c:(.text+0x3074): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/rocker/rocker_ofdpa.o: in function `ofdpa_port_fdb': arm-linux-gnueabi-ld: drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.o: in function `mlx5dr_ste_calc_hash_index': dr_ste.c:(.text+0x354): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/microchip/lan743x_main.o: in function `lan743x_netdev_set_multicast': lan743x_main.c:(.text+0x5dc4): undefined reference to `crc32_le' Add the missing 'select CRC32' entries in Kconfig for each of them. Signed-off-by: Arnd Bergmann Acked-by: Nicolas Ferre Acked-by: Madalin Bucur Acked-by: Mark Einon Acked-by: Simon Horman Link: https://lore.kernel.org/r/20201203232114.1485603-1-arnd@kernel.org Signed-off-by: Jakub Kicinski

net: nxp: Fix use correct return type for ndo_start_xmit()

2020-05-05T18:17:56Z

The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix the ndo function to use the correct type. Signed-off-by: Yunjian Wang Signed-off-by: David S. Miller

net: lpc-enet: fix error return code in lpc_mii_init()

2020-05-01T03:29:39Z

Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: b7370112f519 ("lpc32xx: Added ethernet driver") Signed-off-by: Wei Yongjun Acked-by: Vladimir Zapolskiy Signed-off-by: David S. Miller

net: convert suitable drivers to use phy_do_ioctl_running

2020-01-23T09:49:30Z

Convert suitable drivers to use new helper phy_do_ioctl_running. Signed-off-by: Heiner Kallweit Acked-by: Timur Tabi Acked-by: Florian Fainelli Signed-off-by: David S. Miller

lpc_eth: kernel BUG on remove

2019-12-07T04:51:19Z

We may have found a bug in the nxp/lpc_eth.c driver. The function platform_set_drvdata() is called twice, the second time it is called, in lpc_mii_init(), it overwrites the struct net_device which should be at pdev->dev->driver_data with pldat->mii_bus. When trying to remove the driver, in lpc_eth_drv_remove(), platform_get_drvdata() will return the pldat->mii_bus pointer and try to use it as a struct net_device pointer. This causes unregister_netdev to segfault and generate a kernel BUG. Is this reproducible? Signed-off-by: Daniel Martinez Signed-off-by: Bruno Carneiro da Cunha Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2019-10-20T17:43:00Z

Several cases of overlapping changes which were for the most part trivially resolvable. Signed-off-by: David S. Miller

net: lpc_eth: parse phy nodes from device tree

2019-10-18T20:12:35Z

When connected to a micrel phy, phy_find_first doesn't work properly because the first phy found is on address 0, the broadcast address but, the first thing the phy driver is doing is disabling this broadcast address. The phy is then available only on address 1 but the mdio driver doesn't know about it. Instead, register the mdio bus using of_mdiobus_register and try to find the phy description in device tree before falling back to phy_find_first. This ultimately also allows to describe the interrupt the phy is connected to. Signed-off-by: Alexandre Belloni Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller