kernel.git/drivers/net/ethernet/mscc, branch linux-6.17.y

net: mscc: ocelot: Fix use-after-free caused by cyclic delayed work

2025-10-19T14:37:10Z

[ Upstream commit bc9ea787079671cb19a8b25ff9f02be5ef6bfcf5 ] The origin code calls cancel_delayed_work() in ocelot_stats_deinit() to cancel the cyclic delayed work item ocelot->stats_work. However, cancel_delayed_work() may fail to cancel the work item if it is already executing. While destroy_workqueue() does wait for all pending work items in the work queue to complete before destroying the work queue, it cannot prevent the delayed work item from being rescheduled within the ocelot_check_stats_work() function. This limitation exists because the delayed work item is only enqueued into the work queue after its timer expires. Before the timer expiration, destroy_workqueue() has no visibility of this pending work item. Once the work queue appears empty, destroy_workqueue() proceeds with destruction. When the timer eventually expires, the delayed work item gets queued again, leading to the following warning: workqueue: cannot queue ocelot_check_stats_work on wq ocelot-switch-stats WARNING: CPU: 2 PID: 0 at kernel/workqueue.c:2255 __queue_work+0x875/0xaf0 ... RIP: 0010:__queue_work+0x875/0xaf0 ... RSP: 0018:ffff88806d108b10 EFLAGS: 00010086 RAX: 0000000000000000 RBX: 0000000000000101 RCX: 0000000000000027 RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffff88806d123e88 RBP: ffffffff813c3170 R08: 0000000000000000 R09: ffffed100da247d2 R10: ffffed100da247d1 R11: ffff88806d123e8b R12: ffff88800c00f000 R13: ffff88800d7285c0 R14: ffff88806d0a5580 R15: ffff88800d7285a0 FS: 0000000000000000(0000) GS:ffff8880e5725000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe18e45ea10 CR3: 0000000005e6c000 CR4: 00000000000006f0 Call Trace: ? kasan_report+0xc6/0xf0 ? __pfx_delayed_work_timer_fn+0x10/0x10 ? __pfx_delayed_work_timer_fn+0x10/0x10 call_timer_fn+0x25/0x1c0 __run_timer_base.part.0+0x3be/0x8c0 ? __pfx_delayed_work_timer_fn+0x10/0x10 ? rcu_sched_clock_irq+0xb06/0x27d0 ? __pfx___run_timer_base.part.0+0x10/0x10 ? try_to_wake_up+0xb15/0x1960 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 tmigr_handle_remote_up+0x603/0x7e0 ? __pfx_tmigr_handle_remote_up+0x10/0x10 ? sched_balance_trigger+0x1c0/0x9f0 ? sched_tick+0x221/0x5a0 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 ? tick_nohz_handler+0x339/0x440 ? __pfx_tmigr_handle_remote_up+0x10/0x10 __walk_groups.isra.0+0x42/0x150 tmigr_handle_remote+0x1f4/0x2e0 ? __pfx_tmigr_handle_remote+0x10/0x10 ? ktime_get+0x60/0x140 ? lapic_next_event+0x11/0x20 ? clockevents_program_event+0x1d4/0x2a0 ? hrtimer_interrupt+0x322/0x780 handle_softirqs+0x16a/0x550 irq_exit_rcu+0xaf/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 ... The following diagram reveals the cause of the above warning: CPU 0 (remove) | CPU 1 (delayed work callback) mscc_ocelot_remove() | ocelot_deinit() | ocelot_check_stats_work() ocelot_stats_deinit() | cancel_delayed_work()| ... | queue_delayed_work() destroy_workqueue() | (wait a time) | __queue_work() //UAF The above scenario actually constitutes a UAF vulnerability. The ocelot_stats_deinit() is only invoked when initialization failure or resource destruction, so we must ensure that any delayed work items cannot be rescheduled. Replace cancel_delayed_work() with disable_delayed_work_sync() to guarantee proper cancellation of the delayed work item and ensure completion of any currently executing work before the workqueue is deallocated. A deadlock concern was considered: ocelot_stats_deinit() is called in a process context and is not holding any locks that the delayed work item might also need. Therefore, the use of the _sync() variant is safe here. This bug was identified through static analysis. To reproduce the issue and validate the fix, I simulated ocelot-switch device by writing a kernel module and prepared the necessary resources for the virtual ocelot-switch device's probe process. Then, removing the virtual device will trigger the mscc_ocelot_remove() function, which in turn destroys the workqueue. Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Duoming Zhou Link: https://patch.msgid.link/20251001011149.55073-1-duoming@zju.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: dsa: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()

2025-05-09T23:34:09Z

New timestamping API was introduced in commit 66f7223039c0 ("net: add NDOs for configuring hardware timestamping") from kernel v6.6. It is time to convert DSA to the new API, so that the ndo_eth_ioctl() path can be removed completely. Move the ds->ops->port_hwtstamp_get() and ds->ops->port_hwtstamp_set() calls from dsa_user_ioctl() to dsa_user_hwtstamp_get() and dsa_user_hwtstamp_set(). Due to the fact that the underlying ifreq type changes to kernel_hwtstamp_config, the drivers and the Ocelot switchdev front-end, all hooked up directly or indirectly, must also be converted all at once. The conversion also updates the comment from dsa_port_supports_hwtstamp(), which is no longer true because kernel_hwtstamp_config is kernel memory and does not need copy_to_user(). I've deliberated whether it is necessary to also update "err != -EOPNOTSUPP" to a more general "!err", but all drivers now either return 0 or -EOPNOTSUPP. The existing logic from the ocelot_ioctl() function, to avoid configuring timestamping if the PHY supports the operation, is obsoleted by more advanced core logic in dev_set_hwtstamp_phylib(). This is only a partial preparation for proper PHY timestamping support. None of these switch driver currently sets up PTP traps for PHY timestamping, so setting dev->see_all_hwtstamp_requests is not yet necessary and the conversion is relatively trivial. Signed-off-by: Vladimir Oltean Tested-by: Vladimir Oltean # felix, sja1105, mv88e6xxx Reviewed-by: Vadim Fedorenko Link: https://patch.msgid.link/20250508095236.887789-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2025-05-01T22:11:38Z

Cross-merge networking fixes after downstream PR (net-6.15-rc5). No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski

net: mscc: ocelot: delete PVID VLAN when readding it as non-PVID

2025-04-26T01:45:43Z

The following set of commands: ip link add br0 type bridge vlan_filtering 1 # vlan_default_pvid 1 is implicit ip link set swp0 master br0 bridge vlan add dev swp0 vid 1 should result in the dropping of untagged and 802.1p-tagged traffic, but we see that it continues to be accepted. Whereas, had we deleted VID 1 instead, the aforementioned dropping would have worked This is because the ANA_PORT_DROP_CFG update logic doesn't run, because ocelot_vlan_add() only calls ocelot_port_set_pvid() if the new VLAN has the BRIDGE_VLAN_INFO_PVID flag. Similar to other drivers like mt7530_port_vlan_add() which handle this case correctly, we need to test whether the VLAN we're changing used to have the BRIDGE_VLAN_INFO_PVID flag, but lost it now. That amounts to a PVID deletion and should be treated as such. Regarding blame attribution: this never worked properly since the introduction of bridge VLAN filtering in commit 7142529f1688 ("net: mscc: ocelot: add VLAN filtering"). However, there was a significant paradigm shift which aligned the ANA_PORT_DROP_CFG register with the PVID concept rather than with the native VLAN concept, and that change wasn't targeted for 'stable'. Realistically, that is as far as this fix needs to be propagated to. Fixes: be0576fed6d3 ("net: mscc: ocelot: move the logic to drop 802.1p traffic to the pvid deletion") Signed-off-by: Vladimir Oltean Link: https://patch.msgid.link/20250424223734.3096202-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski

net: ptp: introduce .supported_perout_flags to ptp_clock_info

2025-04-16T03:20:58Z

The PTP_PEROUT_REQUEST2 ioctl has gained support for flags specifying specific output behavior including PTP_PEROUT_ONE_SHOT, PTP_PEROUT_DUTY_CYCLE, PTP_PEROUT_PHASE. Driver authors are notorious for not checking the flags of the request. This results in misinterpreting the request, generating an output signal that does not match the requested value. It is anticipated that even more flags will be added in the future, resulting in even more broken requests. Expecting these issues to be caught during review or playing whack-a-mole after the fact is not a great solution. Instead, introduce the supported_perout_flags field in the ptp_clock_info structure. Update the core character device logic to explicitly reject any request which has a flag not on this list. This ensures that drivers must 'opt in' to the flags they support. Drivers which don't set the .supported_perout_flags field will not need to check that unsupported flags aren't passed, as the core takes care of this. Update the drivers which do support flags to set this new field. Note the following driver files set n_per_out to a non-zero value but did not check the flags at all: • drivers/ptp/ptp_clockmatrix.c • drivers/ptp/ptp_idt82p33.c • drivers/ptp/ptp_fc3.c • drivers/net/ethernet/ti/am65-cpts.c • drivers/net/ethernet/aquantia/atlantic/aq_ptp.c • drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c • drivers/net/dsa/sja1105/sja1105_ptp.c • drivers/net/ethernet/freescale/dpaa2/dpaa2-ptp.c • drivers/net/ethernet/mscc/ocelot_vsc7514.c • drivers/net/ethernet/intel/i40e/i40e_ptp.c Reviewed-by: Vadim Fedorenko Signed-off-by: Jacob Keller Reviewed-by: Kory Maincent Link: https://patch.msgid.link/20250414-jk-supported-perout-flags-v2-2-f6b17d15475c@intel.com Signed-off-by: Jakub Kicinski

net: mscc: ocelot: add TX timestamping statistics

2025-01-18T04:01:10Z

Add an u64 hardware timestamping statistics structure for each ocelot port. Export a function from the common switch library for reporting them to ethtool. This is called by the ocelot switchdev front-end for now. Note that for the switchdev driver, we report the one-step PTP packets as unconfirmed, even though in principle, for some transmission mechanisms like FDMA, we may be able to confirm transmission and bump the "pkts" counter in ocelot_fdma_tx_cleanup() instead. I don't have access to hardware which uses the switchdev front-end, and I've kept the implementation simple. Signed-off-by: Vladimir Oltean Reviewed-by: Jakub Kicinski Link: https://patch.msgid.link/20250116104628.123555-4-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2024-12-19T19:35:07Z

Cross-merge networking fixes after downstream PR (net-6.13-rc4). No conflicts. Adjacent changes: drivers/net/ethernet/renesas/rswitch.h 32fd46f5b69e ("net: renesas: rswitch: remove speed from gwca structure") 922b4b955a03 ("net: renesas: rswitch: rework ts tags management") Signed-off-by: Jakub Kicinski

net: mscc: ocelot: fix incorrect IFH SRC_PORT field in ocelot_ifh_set_basic()

2024-12-15T21:12:58Z

Packets injected by the CPU should have a SRC_PORT field equal to the CPU port module index in the Analyzer block (ocelot->num_phys_ports). The blamed commit copied the ocelot_ifh_set_basic() call incorrectly from ocelot_xmit_common() in net/dsa/tag_ocelot.c. Instead of calling with "x", it calls with BIT_ULL(x), but the field is not a port mask, but rather a single port index. [ side note: this is the technical debt of code duplication :( ] The error used to be silent and doesn't appear to have other user-visible manifestations, but with new changes in the packing library, it now fails loudly as follows: ------------[ cut here ]------------ Cannot store 0x40 inside bits 46-43 - will truncate sja1105 spi2.0: xmit timed out WARNING: CPU: 1 PID: 102 at lib/packing.c:98 __pack+0x90/0x198 sja1105 spi2.0: timed out polling for tstamp CPU: 1 UID: 0 PID: 102 Comm: felix_xmit Tainted: G W N 6.13.0-rc1-00372-gf706b85d972d-dirty #2605 Call trace: __pack+0x90/0x198 (P) __pack+0x90/0x198 (L) packing+0x78/0x98 ocelot_ifh_set_basic+0x260/0x368 ocelot_port_inject_frame+0xa8/0x250 felix_port_deferred_xmit+0x14c/0x258 kthread_worker_fn+0x134/0x350 kthread+0x114/0x138 The code path pertains to the ocelot switchdev driver and to the felix secondary DSA tag protocol, ocelot-8021q. Here seen with ocelot-8021q. The messenger (packing) is not really to blame, so fix the original commit instead. Fixes: e1b9e80236c5 ("net: mscc: ocelot: fix QoS class for injected packets with "ocelot-8021q"") Signed-off-by: Vladimir Oltean Reviewed-by: Simon Horman Link: https://patch.msgid.link/20241212165546.879567-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2024-12-12T22:19:05Z

Cross-merge networking fixes after downstream PR (net-6.13-rc3). No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski

rtnetlink: add ndo_fdb_dump_context

2024-12-11T02:32:32Z

rtnl_fdb_dump() and various ndo_fdb_dump() helpers share a hidden layout of cb->ctx. Before switching rtnl_fdb_dump() to for_each_netdev_dump() in the following patch, make this more explicit. Signed-off-by: Eric Dumazet Reviewed-by: Ido Schimmel Reviewed-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20241209100747.2269613-2-edumazet@google.com Signed-off-by: Jakub Kicinski