kernel.git/drivers/net/ethernet/mscc, branch linux-5.4.y

net: mscc: ocelot: allow unregistered IP multicast flooding

2022-07-02T14:28:50Z

Flooding of unregistered IP multicast has been broken (both to other switch ports and to the CPU) since the ocelot driver introduction, and up until commit 4cf35a2b627a ("net: mscc: ocelot: fix broken IP multicast flooding"), a bug fix for commit 421741ea5672 ("net: mscc: ocelot: offload bridge port flags to device") from v5.12. The driver used to set PGID_MCIPV4 and PGID_MCIPV6 to the empty port mask (0), which made unregistered IPv4/IPv6 multicast go nowhere, and without ever modifying that port mask at runtime. The expectation is that such packets are treated as broadcast, and flooded according to the forwarding domain (to the CPU if the port is standalone, or to the CPU and other bridged ports, if under a bridge). Since the aforementioned commit, the limitation has been lifted by responding to SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS events emitted by the bridge. As for host flooding, DSA synthesizes another call to ocelot_port_bridge_flags() on the NPI port which ensures that the CPU gets the unregistered multicast traffic it might need, for example for smcroute to work between standalone ports. But between v4.18 and v5.12, IP multicast flooding has remained unfixed. Delete the inexplicable premature optimization of clearing PGID_MCIPV4 and PGID_MCIPV6 as part of the init sequence, and allow unregistered IP multicast to be flooded freely according to the forwarding domain established by PGID_SRC, by explicitly programming PGID_MCIPV4 and PGID_MCIPV6 towards all physical ports plus the CPU port module. Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Cc: stable@kernel.org Signed-off-by: Vladimir Oltean Signed-off-by: Greg Kroah-Hartman

net: mscc: ocelot: correctly report the timestamping RX filters in ethtool

2021-12-01T08:23:34Z

[ Upstream commit c49a35eedfef08bffd46b53c25dbf9d6016a86ff ] The driver doesn't support RX timestamping for non-PTP packets, but it declares that it does. Restrict the reported RX filters to PTP v2 over L2 and over L4. Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by: Vladimir Oltean Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: mscc: ocelot: don't downgrade timestamping RX filters in SIOCSHWTSTAMP

2021-12-01T08:23:34Z

[ Upstream commit 8a075464d1e9317ffae0973dfe538a7511291a06 ] The ocelot driver, when asked to timestamp all receiving packets, 1588 v1 or NTP, says "nah, here's 1588 v2 for you". According to this discussion: https://patchwork.kernel.org/project/netdevbpf/patch/20211104133204.19757-8-martin.kaistra@linutronix.de/#24577647 drivers that downgrade from a wider request to a narrower response (or even a response where the intersection with the request is empty) are buggy, and should return -ERANGE instead. This patch fixes that. Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Suggested-by: Richard Cochran Signed-off-by: Vladimir Oltean Acked-by: Richard Cochran Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: mscc: ocelot: allow offloading of bridge on top of LAG

2021-01-27T10:47:54Z

commit 79267ae22615496655feee2db0848f6786bcf67a upstream. The blamed commit was too aggressive, and it made ocelot_netdevice_event react only to network interface events emitted for the ocelot switch ports. In fact, only the PRECHANGEUPPER should have had that check. When we ignore all events that are not for us, we miss the fact that the upper of the LAG changes, and the bonding interface gets enslaved to a bridge. This is an operation we could offload under certain conditions. Fixes: 7afb3e575e5a ("net: mscc: ocelot: don't handle netdev events for other netdevs") Signed-off-by: Vladimir Oltean Reviewed-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210118135210.2666246-1-olteanv@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: mscc: fix in frame extraction

2020-03-05T15:43:31Z

[ Upstream commit a81541041ceb55bcec9a8bb8ad3482263f0a205a ] Each extracted frame on Ocelot has an IFH. The frame and IFH are extracted by reading chuncks of 4 bytes from a register. In case the IFH and frames were read corretly it would try to read the next frame. In case there are no more frames in the queue, it checks if there were any previous errors and in that case clear the queue. But this check will always succeed also when there are no errors. Because when extracting the IFH the error is checked against 4(number of bytes read) and then the error is set only if the extraction of the frame failed. So in a happy case where there are no errors the err variable is still 4. So it could be a case where after the check that there are no more frames in the queue, a frame will arrive in the queue but because the error is not reseted, it would try to flush the queue. So the frame will be lost. The fix consist in resetting the error after reading the IFH. Signed-off-by: Horatiu Vultur Acked-by: Alexandre Belloni Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: mscc: ocelot: unregister the PTP clock on deinit

2019-12-18T15:09:14Z

[ Upstream commit 9385973fe8db9743fa93bf17245635be4eb8c4a6 ] Currently a switch driver deinit frees the regmaps, but the PTP clock is still out there, available to user space via /dev/ptpN. Any PTP operation is a ticking time bomb, since it will attempt to use the freed regmaps and thus trigger kernel panics: [ 4.291746] fsl_enetc 0000:00:00.2 eth1: error -22 setting up slave phy [ 4.291871] mscc_felix 0000:00:00.5: Failed to register DSA switch: -22 [ 4.308666] mscc_felix: probe of 0000:00:00.5 failed with error -22 [ 6.358270] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000088 [ 6.367090] Mem abort info: [ 6.369888] ESR = 0x96000046 [ 6.369891] EC = 0x25: DABT (current EL), IL = 32 bits [ 6.369892] SET = 0, FnV = 0 [ 6.369894] EA = 0, S1PTW = 0 [ 6.369895] Data abort info: [ 6.369897] ISV = 0, ISS = 0x00000046 [ 6.369899] CM = 0, WnR = 1 [ 6.369902] user pgtable: 4k pages, 48-bit VAs, pgdp=00000020d58c7000 [ 6.369904] [0000000000000088] pgd=00000020d5912003, pud=00000020d5915003, pmd=0000000000000000 [ 6.369914] Internal error: Oops: 96000046 [#1] PREEMPT SMP [ 6.420443] Modules linked in: [ 6.423506] CPU: 1 PID: 262 Comm: phc_ctl Not tainted 5.4.0-03625-gb7b2a5dadd7f #204 [ 6.431273] Hardware name: LS1028A RDB Board (DT) [ 6.435989] pstate: 40000085 (nZcv daIf -PAN -UAO) [ 6.440802] pc : css_release+0x24/0x58 [ 6.444561] lr : regmap_read+0x40/0x78 [ 6.448316] sp : ffff800010513cc0 [ 6.451636] x29: ffff800010513cc0 x28: ffff002055873040 [ 6.456963] x27: 0000000000000000 x26: 0000000000000000 [ 6.462289] x25: 0000000000000000 x24: 0000000000000000 [ 6.467617] x23: 0000000000000000 x22: 0000000000000080 [ 6.472944] x21: ffff800010513d44 x20: 0000000000000080 [ 6.478270] x19: 0000000000000000 x18: 0000000000000000 [ 6.483596] x17: 0000000000000000 x16: 0000000000000000 [ 6.488921] x15: 0000000000000000 x14: 0000000000000000 [ 6.494247] x13: 0000000000000000 x12: 0000000000000000 [ 6.499573] x11: 0000000000000000 x10: 0000000000000000 [ 6.504899] x9 : 0000000000000000 x8 : 0000000000000000 [ 6.510225] x7 : 0000000000000000 x6 : ffff800010513cf0 [ 6.515550] x5 : 0000000000000000 x4 : 0000000fffffffe0 [ 6.520876] x3 : 0000000000000088 x2 : ffff800010513d44 [ 6.526202] x1 : ffffcada668ea000 x0 : ffffcada64d8b0c0 [ 6.531528] Call trace: [ 6.533977] css_release+0x24/0x58 [ 6.537385] regmap_read+0x40/0x78 [ 6.540795] __ocelot_read_ix+0x6c/0xa0 [ 6.544641] ocelot_ptp_gettime64+0x4c/0x110 [ 6.548921] ptp_clock_gettime+0x4c/0x58 [ 6.552853] pc_clock_gettime+0x5c/0xa8 [ 6.556699] __arm64_sys_clock_gettime+0x68/0xc8 [ 6.561331] el0_svc_common.constprop.2+0x7c/0x178 [ 6.566133] el0_svc_handler+0x34/0xa0 [ 6.569891] el0_sync_handler+0x114/0x1d0 [ 6.573908] el0_sync+0x140/0x180 [ 6.577232] Code: d503201f b00119a1 91022263 b27b7be4 (f9004663) [ 6.583349] ---[ end trace d196b9b14cdae2da ]--- [ 6.587977] Kernel panic - not syncing: Fatal exception [ 6.593216] SMP: stopping secondary CPUs [ 6.597151] Kernel Offset: 0x4ada54400000 from 0xffff800010000000 [ 6.603261] PHYS_OFFSET: 0xffffd0a7c0000000 [ 6.607454] CPU features: 0x10002,21806008 [ 6.611558] Memory Limit: none And now that ocelot->ptp_clock is checked at exit, prevent a potential error where ptp_clock_register returned a pointer-encoded error, which we are keeping in the ocelot private data structure. So now, ocelot->ptp_clock is now either NULL or a valid pointer. Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Cc: Antoine Tenart Reviewed-by: Florian Fainelli Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: mscc: ocelot: fix __ocelot_rmw_ix prototype

2019-11-06T23:34:12Z

The "read-modify-write register index" function is declared with a confusing prototype: the "mask" and "reg" arguments are swapped. Fortunately, this does not affect callers so far. Both arguments are u32, and the wrapper macros (ocelot_rmw_ix etc) have the arguments in the correct order (the one from ocelot_io.c). Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: mscc: ocelot: fix NULL pointer on LAG slave removal

2019-11-06T23:16:17Z

lag_upper_info may be NULL on slave removal. Fixes: dc96ee3730fc ("net: mscc: ocelot: add bonding support") Signed-off-by: Claudiu Manoil Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: mscc: ocelot: don't handle netdev events for other netdevs

2019-11-06T23:16:17Z

The check that the event is actually for this device should be moved from the "port" handler to the net device handler. Otherwise the port handler will deny bonding configuration for other net devices in the same system (like enetc in the LS1028A) that don't have the lag_upper_info->tx_type restriction that ocelot has. Fixes: dc96ee3730fc ("net: mscc: ocelot: add bonding support") Signed-off-by: Claudiu Manoil Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

net: mscc: ocelot: refuse to overwrite the port's native vlan

2019-10-29T23:22:07Z

The switch driver keeps a "vid" variable per port, which signifies _the_ VLAN ID that is stripped on that port's egress (aka the native VLAN on a trunk port). That is the way the hardware is designed (mostly). The port->vid is programmed into REW:PORT:PORT_VLAN_CFG:PORT_VID and the rewriter is told to send all traffic as tagged except the one having port->vid. There exists a possibility of finer-grained egress untagging decisions: using the VCAP IS1 engine, one rule can be added to match every VLAN-tagged frame whose VLAN should be untagged, and set POP_CNT=1 as action. However, the IS1 can hold at most 512 entries, and the VLANs are in the order of 6 * 4096. So the code is fine for now. But this sequence of commands: $ bridge vlan add dev swp0 vid 1 pvid untagged $ bridge vlan add dev swp0 vid 2 untagged makes untagged and pvid-tagged traffic be sent out of swp0 as tagged with VID 1, despite user's request. Prevent that from happening. The user should temporarily remove the existing untagged VLAN (1 in this case), add it back as tagged, and then add the new untagged VLAN (2 in this case). Cc: Antoine Tenart Cc: Alexandre Belloni Fixes: 7142529f1688 ("net: mscc: ocelot: add VLAN filtering") Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Acked-by: Alexandre Belloni Signed-off-by: David S. Miller