kernel.git/drivers/net/ethernet/mscc, branch linux-5.3.y

net: mscc: ocelot: fix __ocelot_rmw_ix prototype

2019-12-04T21:33:54Z

[ Upstream commit 17fdd7638cb687cd7f15a48545f25d738f0101e0 ] The "read-modify-write register index" function is declared with a confusing prototype: the "mask" and "reg" arguments are swapped. Fortunately, this does not affect callers so far. Both arguments are u32, and the wrapper macros (ocelot_rmw_ix etc) have the arguments in the correct order (the one from ocelot_io.c). Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: mscc: ocelot: refuse to overwrite the port's native vlan

2019-11-12T18:28:10Z

[ Upstream commit b9cd75e6689560140dadaed98eb4b41aad75d55d ] The switch driver keeps a "vid" variable per port, which signifies _the_ VLAN ID that is stripped on that port's egress (aka the native VLAN on a trunk port). That is the way the hardware is designed (mostly). The port->vid is programmed into REW:PORT:PORT_VLAN_CFG:PORT_VID and the rewriter is told to send all traffic as tagged except the one having port->vid. There exists a possibility of finer-grained egress untagging decisions: using the VCAP IS1 engine, one rule can be added to match every VLAN-tagged frame whose VLAN should be untagged, and set POP_CNT=1 as action. However, the IS1 can hold at most 512 entries, and the VLANs are in the order of 6 * 4096. So the code is fine for now. But this sequence of commands: $ bridge vlan add dev swp0 vid 1 pvid untagged $ bridge vlan add dev swp0 vid 2 untagged makes untagged and pvid-tagged traffic be sent out of swp0 as tagged with VID 1, despite user's request. Prevent that from happening. The user should temporarily remove the existing untagged VLAN (1 in this case), add it back as tagged, and then add the new untagged VLAN (2 in this case). Cc: Antoine Tenart Cc: Alexandre Belloni Fixes: 7142529f1688 ("net: mscc: ocelot: add VLAN filtering") Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Acked-by: Alexandre Belloni Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: mscc: ocelot: fix vlan_filtering when enslaving to bridge before link is up

2019-11-12T18:28:10Z

[ Upstream commit 1c44ce560b4de639f237b458be1729489ff44d0a ] Background information: the driver operates the hardware in a mode where a single VLAN can be transmitted as untagged on a particular egress port. That is the "native VLAN on trunk port" use case. Its value is held in port->vid. Consider the following command sequence (no network manager, all interfaces are down, debugging prints added by me): $ ip link add dev br0 type bridge vlan_filtering 1 $ ip link set dev swp0 master br0 Kernel code path during last command: br_add_slave -> ocelot_netdevice_port_event (NETDEV_CHANGEUPPER): [ 21.401901] ocelot_vlan_port_apply: port 0 vlan aware 0 pvid 0 vid 0 br_add_slave -> nbp_vlan_init -> switchdev_port_attr_set -> ocelot_port_attr_set (SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING): [ 21.413335] ocelot_vlan_port_apply: port 0 vlan aware 1 pvid 0 vid 0 br_add_slave -> nbp_vlan_init -> nbp_vlan_add -> br_switchdev_port_vlan_add -> switchdev_port_obj_add -> ocelot_port_obj_add -> ocelot_vlan_vid_add [ 21.667421] ocelot_vlan_port_apply: port 0 vlan aware 1 pvid 1 vid 1 So far so good. The bridge has replaced the driver's default pvid used in standalone mode (0) with its own default_pvid (1). The port's vid (native VLAN) has also changed from 0 to 1. $ ip link set dev swp0 up [ 31.722956] 8021q: adding VLAN 0 to HW filter on device swp0 do_setlink -> dev_change_flags -> vlan_vid_add -> ocelot_vlan_rx_add_vid -> ocelot_vlan_vid_add: [ 31.728700] ocelot_vlan_port_apply: port 0 vlan aware 1 pvid 1 vid 0 The 8021q module uses the .ndo_vlan_rx_add_vid API on .ndo_open to make ports be able to transmit and receive 802.1p-tagged traffic by default. This API is supposed to offload a VLAN sub-interface, which for a switch port means to add a VLAN that is not a pvid, and tagged on egress. But the driver implementation of .ndo_vlan_rx_add_vid is wrong: it adds back vid 0 as "egress untagged". Now back to the initial paragraph: there is a single untagged VID that the driver keeps track of, and that has just changed from 1 (the pvid) to 0. So this breaks the bridge core's expectation, because it has changed vid 1 from untagged to tagged, when what the user sees is. $ bridge vlan port vlan ids swp0 1 PVID Egress Untagged br0 1 PVID Egress Untagged But curiously, instead of manifesting itself as "untagged and pvid-tagged traffic gets sent as tagged on egress", the bug: - is hidden when vlan_filtering=0 - manifests as dropped traffic when vlan_filtering=1, due to this setting: if (port->vlan_aware && !port->vid) /* If port is vlan-aware and tagged, drop untagged and priority * tagged frames. */ val |= ANA_PORT_DROP_CFG_DROP_UNTAGGED_ENA | ANA_PORT_DROP_CFG_DROP_PRIO_S_TAGGED_ENA | ANA_PORT_DROP_CFG_DROP_PRIO_C_TAGGED_ENA; which would have made sense if it weren't for this bug. The setting's intention was "this is a trunk port with no native VLAN, so don't accept untagged traffic". So the driver was never expecting to set VLAN 0 as the value of the native VLAN, 0 was just encoding for "invalid". So the fix is to not send 802.1p traffic as untagged, because that would change the port's native vlan to 0, unbeknownst to the bridge, and trigger unexpected code paths in the driver. Cc: Antoine Tenart Cc: Alexandre Belloni Fixes: 7142529f1688 ("net: mscc: ocelot: add VLAN filtering") Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Acked-by: Alexandre Belloni Reviewed-by: Horatiu Vultur Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: mscc: ocelot: fix NULL pointer on LAG slave removal

2019-11-12T18:26:44Z

[ Upstream commit 3b3eed8eec47259939ee6c3d58aea1c311ddee3b ] lag_upper_info may be NULL on slave removal. Fixes: dc96ee3730fc ("net: mscc: ocelot: add bonding support") Signed-off-by: Claudiu Manoil Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: mscc: ocelot: don't handle netdev events for other netdevs

2019-11-12T18:26:44Z

[ Upstream commit 7afb3e575e5aa9f5a200a3eb3f45d8130f6d6601 ] The check that the event is actually for this device should be moved from the "port" handler to the net device handler. Otherwise the port handler will deny bonding configuration for other net devices in the same system (like enetc in the LS1028A) that don't have the lag_upper_info->tx_type restriction that ocelot has. Fixes: dc96ee3730fc ("net: mscc: ocelot: add bonding support") Signed-off-by: Claudiu Manoil Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: mscc: ocelot: add missing of_node_put after calling of_get_child_by_name

2019-10-29T08:21:36Z

[ Upstream commit d2c50b1cd94528aea8c8e9abb4cce81590f32cc4 ] of_node_put needs to be called when the device node which is got from of_get_child_by_name finished using. In both cases of success and failure, we need to release 'ports', so clean up the code using goto. fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Wen Yang Cc: Alexandre Belloni Cc: Microchip Linux Driver Support Cc: "David S. Miller" Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

ocelot_ace: fix action of trap

2019-08-22T22:44:24Z

The trap action should be copying the frame to CPU and dropping it for forwarding, but current setting was just copying frame to CPU. Fixes: b596229448dd ("net: mscc: ocelot: Add support for tcam") Signed-off-by: Yangbo Lu Acked-by: Allan W. Nielsen Signed-off-by: David S. Miller

net: sched: use major priority number as hardware priority

2019-08-18T21:13:23Z

tc transparently maps the software priority number to hardware. Update it to pass the major priority which is what most drivers expect. Update drivers too so they do not need to lshift the priority field of the flow_cls_common_offload object. The stmmac driver is an exception, since this code assumes the tc software priority is fine, therefore, lshift it just to be conservative. Signed-off-by: Pablo Neira Ayuso Acked-by: Jiri Pirko Signed-off-by: David S. Miller

ocelot: Cancel delayed work before wq destruction

2019-07-26T21:11:30Z

Make sure the delayed work for stats update is not pending before wq destruction. This fixes the module unload path. The issue is there since day 1. Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Claudiu Manoil Reviewed-by: Alexandre Belloni Signed-off-by: David S. Miller

net: flow_offload: add flow_block structure and use it

2019-07-20T04:27:45Z

This object stores the flow block callbacks that are attached to this block. Update flow_block_cb_lookup() to take this new object. This patch restores the block sharing feature. Fixes: da3eeb904ff4 ("net: flow_offload: add list handling functions") Signed-off-by: Pablo Neira Ayuso Acked-by: Jiri Pirko Signed-off-by: David S. Miller