kernel.git/drivers/net/ethernet/microchip, branch linux-5.9.y

lan743x: fix for potential NULL pointer dereference with bare card

2020-12-21T12:28:18Z

[ Upstream commit e9e13b6adc338be1eb88db87bcb392696144bd02 ] This is the 3rd revision of the patch fix for potential null pointer dereference with lan743x card. The simpliest way to reproduce: boot with bare lan743x and issue "ethtool ethN" commant where ethN is the interface with lan743x card. Example: $ sudo ethtool eth7 dmesg: [ 103.510336] BUG: kernel NULL pointer dereference, address: 0000000000000340 ... [ 103.510836] RIP: 0010:phy_ethtool_get_wol+0x5/0x30 [libphy] ... [ 103.511629] Call Trace: [ 103.511666] lan743x_ethtool_get_wol+0x21/0x40 [lan743x] [ 103.511724] dev_ethtool+0x1507/0x29d0 [ 103.511769] ? avc_has_extended_perms+0x17f/0x440 [ 103.511820] ? tomoyo_init_request_info+0x84/0x90 [ 103.511870] ? tomoyo_path_number_perm+0x68/0x1e0 [ 103.511919] ? tty_insert_flip_string_fixed_flag+0x82/0xe0 [ 103.511973] ? inet_ioctl+0x187/0x1d0 [ 103.512016] dev_ioctl+0xb5/0x560 [ 103.512055] sock_do_ioctl+0xa0/0x140 [ 103.512098] sock_ioctl+0x2cb/0x3c0 [ 103.512139] __x64_sys_ioctl+0x84/0xc0 [ 103.512183] do_syscall_64+0x33/0x80 [ 103.512224] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 103.512274] RIP: 0033:0x7f54a9cba427 ... Previous versions can be found at: v1: initial version https://lkml.org/lkml/2020/10/28/921 v2: do not return from lan743x_ethtool_set_wol if netdev->phydev == NULL, just skip the call of phy_ethtool_set_wol() instead. https://lkml.org/lkml/2020/10/31/380 v3: in function lan743x_ethtool_set_wol: use ternary operator instead of if-else sentence (review by Markus Elfring) return -ENETDOWN insted of -EIO (review by Andrew Lunn) Signed-off-by: Sergej Bauer Link: https://lore.kernel.org/r/20201101223556.16116-1-sbauer@blackbox.su Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

lan743x: prevent entire kernel HANG on open, for some platforms

2020-11-24T12:38:47Z

[ Upstream commit 796a2665ca3e91ebaba7222f76fd9a035714e2d8 ] On arm imx6, when opening the chip's netdev, the whole Linux kernel intermittently hangs/freezes. This is caused by a bug in the driver code which tests if pcie interrupts are working correctly, using the software interrupt: 1. open: enable the software interrupt 2. open: tell the chip to assert the software interrupt 3. open: wait for flag 4. ISR: acknowledge s/w interrupt, set flag 5. open: notice flag, disable the s/w interrupt, continue Unfortunately the ISR only acknowledges the s/w interrupt, but does not disable it. This will re-trigger the ISR in a tight loop. On some (lucky) platforms, open proceeds to disable the s/w interrupt even while the ISR is 'spinning'. On arm imx6, the spinning ISR does not allow open to proceed, resulting in a hung Linux kernel. Fix minimally by disabling the s/w interrupt in the ISR, which will prevent it from spinning. This won't break anything because the s/w interrupt is used as a one-shot interrupt. Note that this is a minimal fix, overlooking many possible cleanups, e.g.: - lan743x_intr_software_isr() is completely redundant and reads INT_STS twice for no apparent reason - disabling the s/w interrupt in lan743x_intr_test_isr() is now redundant, but harmless - waiting on software_isr_flag can be converted from a sleeping poll loop to wait_event_timeout() Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Tested-by: Sven Van Asbroeck # arm imx6 lan7430 Signed-off-by: Sven Van Asbroeck Link: https://lore.kernel.org/r/20201112204741.12375-1-TheSven73@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

lan743x: fix issue causing intermittent kernel log warnings

2020-11-24T12:38:47Z

[ Upstream commit e35df62e04cc6fc4b9d90d054732f138349ff9b1 ] When running this chip on arm imx6, we intermittently observe the following kernel warning in the log, especially when the system is under high load: [ 50.119484] ------------[ cut here ]------------ [ 50.124377] WARNING: CPU: 0 PID: 303 at kernel/softirq.c:169 __local_bh_enable_ip+0x100/0x184 [ 50.132925] IRQs not enabled as expected [ 50.159250] CPU: 0 PID: 303 Comm: rngd Not tainted 5.7.8 #1 [ 50.164837] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 50.171395] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 50.179162] [] (show_stack) from [] (dump_stack+0xac/0xd8) [ 50.186408] [] (dump_stack) from [] (__warn+0xd0/0x10c) [ 50.193391] [] (__warn) from [] (warn_slowpath_fmt+0x98/0xc4) [ 50.200892] [] (warn_slowpath_fmt) from [] (__local_bh_enable_ip+0x100/0x184) [ 50.209860] [] (__local_bh_enable_ip) from [] (destroy_conntrack+0x48/0xd8 [nf_conntrack]) [ 50.220038] [] (destroy_conntrack [nf_conntrack]) from [] (nf_conntrack_destroy+0x94/0x168) [ 50.230160] [] (nf_conntrack_destroy) from [] (skb_release_head_state+0xa0/0xd0) [ 50.239314] [] (skb_release_head_state) from [] (skb_release_all+0xc/0x24) [ 50.247946] [] (skb_release_all) from [] (consume_skb+0x74/0x17c) [ 50.255796] [] (consume_skb) from [] (lan743x_tx_release_desc+0x120/0x124) [ 50.264428] [] (lan743x_tx_release_desc) from [] (lan743x_tx_napi_poll+0x5c/0x18c) [ 50.273755] [] (lan743x_tx_napi_poll) from [] (net_rx_action+0x118/0x4a4) [ 50.282306] [] (net_rx_action) from [] (__do_softirq+0x13c/0x53c) [ 50.290157] [] (__do_softirq) from [] (irq_exit+0x150/0x17c) [ 50.297575] [] (irq_exit) from [] (__handle_domain_irq+0x60/0xb0) [ 50.305423] [] (__handle_domain_irq) from [] (gic_handle_irq+0x4c/0x90) [ 50.313790] [] (gic_handle_irq) from [] (__irq_usr+0x54/0x80) [ 50.321287] Exception stack(0xecd99fb0 to 0xecd99ff8) [ 50.326355] 9fa0: 1cf1aa74 00000001 00000001 00000000 [ 50.334547] 9fc0: 00000001 00000000 00000000 00000000 00000000 00000000 00004097 b6d17d14 [ 50.342738] 9fe0: 00000001 b6d17c60 00000000 b6e71f94 800b0010 ffffffff [ 50.349364] irq event stamp: 2525027 [ 50.352955] hardirqs last enabled at (2525026): [] net_rx_action+0xb4/0x4a4 [ 50.360892] hardirqs last disabled at (2525027): [] _raw_spin_lock_irqsave+0x1c/0x50 [ 50.369517] softirqs last enabled at (2524660): [] __do_softirq+0x38c/0x53c [ 50.377446] softirqs last disabled at (2524693): [] irq_exit+0x150/0x17c [ 50.385027] ---[ end trace c0b571db4bc8087d ]--- The driver is calling dev_kfree_skb() from code inside a spinlock, where h/w interrupts are disabled. This is forbidden, as documented in include/linux/netdevice.h. The correct function to use dev_kfree_skb_irq(), or dev_kfree_skb_any(). Fix by using the correct dev_kfree_skb_xxx() functions: in lan743x_tx_release_desc(): called by lan743x_tx_release_completed_descriptors() called by in lan743x_tx_napi_poll() which holds a spinlock called by lan743x_tx_release_all_descriptors() called by lan743x_tx_close() which can-sleep conclusion: use dev_kfree_skb_any() in lan743x_tx_xmit_frame(): which holds a spinlock conclusion: use dev_kfree_skb_irq() in lan743x_tx_close(): which can-sleep conclusion: use dev_kfree_skb() in lan743x_rx_release_ring_element(): called by lan743x_rx_close() which can-sleep called by lan743x_rx_open() which can-sleep conclusion: use dev_kfree_skb() Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Sven Van Asbroeck Link: https://lore.kernel.org/r/20201112185949.11315-1-TheSven73@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

lan743x: fix use of uninitialized variable

2020-11-18T18:22:21Z

[ Upstream commit edbc21113bde13ca3d06eec24b621b1f628583dd ] When no devicetree is present, the driver will use an uninitialized variable. Fix by initializing this variable. Fixes: 902a66e08cea ("lan743x: correctly handle chips with internal PHY") Reported-by: kernel test robot Signed-off-by: Sven Van Asbroeck Link: https://lore.kernel.org/r/20201112152513.1941-1-TheSven73@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

lan743x: fix "BUG: invalid wait context" when setting rx mode

2020-11-18T18:22:20Z

[ Upstream commit 2b52a4b65bc8f14520fe6e996ea7fb3f7e400761 ] In the net core, the struct net_device_ops -> ndo_set_rx_mode() callback is called with the dev->addr_list_lock spinlock held. However, this driver's ndo_set_rx_mode callback eventually calls lan743x_dp_write(), which acquires a mutex. Mutex acquisition may sleep, and this is not allowed when holding a spinlock. Fix by removing the dp_lock mutex entirely. Its purpose is to prevent concurrent accesses to the data port. No concurrent accesses are possible, because the dev->addr_list_lock spinlock in the core only lets through one thread at a time. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Sven Van Asbroeck Link: https://lore.kernel.org/r/20201109203828.5115-1-TheSven73@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

lan743x: correctly handle chips with internal PHY

2020-11-18T18:22:19Z

[ Upstream commit 902a66e08ceaadb9a7a1ab3a4f3af611cd1d8cba ] Commit 6f197fb63850 ("lan743x: Added fixed link and RGMII support") assumes that chips with an internal PHY will never have a devicetree entry. This is incorrect: even for these chips, a devicetree entry can be useful e.g. to pass the mac address from bootloader to chip: &pcie { status = "okay"; host@0 { reg = <0 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; lan7430: ethernet@0 { /* LAN7430 with internal PHY */ compatible = "microchip,lan743x"; status = "okay"; reg = <0 0 0 0 0>; /* filled in by bootloader */ local-mac-address = [00 00 00 00 00 00]; }; }; }; If a devicetree entry is present, the driver will not attach the chip to its internal phy, and the chip will be non-operational. Fix by tweaking the phy connection algorithm: - first try to connect to a phy specified in the devicetree (could be 'real' phy, or just a 'fixed-link') - if that doesn't succeed, try to connect to an internal phy, even if the chip has a devnode Tested on a LAN7430 with internal PHY. I cannot test a device using fixed-link, as I do not have access to one. Fixes: 6f197fb63850 ("lan743x: Added fixed link and RGMII support") Tested-by: Sven Van Asbroeck # lan7430 Reviewed-by: Andrew Lunn Signed-off-by: Sven Van Asbroeck Link: https://lore.kernel.org/r/20201108171224.23829-1-TheSven73@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

treewide: Use fallthrough pseudo-keyword

2020-08-23T22:36:59Z

Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva

lan743x: remove redundant initialization of variable current_head_index

2020-07-23T00:55:35Z

The variable current_head_index is being initialized with a value that is never read and it is being updated later with a new value. Replace the initialization of -1 with the latter assignment. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King Signed-off-by: David S. Miller

lan743x: switch from 'pci_' to 'dma_' API

2020-07-14T20:47:56Z

The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GPF_ with a correct flag. It has been compile tested. When memory is allocated in 'lan743x_tx_ring_cleanup()' and 'lan743x_rx_ring_init()', GFP_KERNEL can be used because this flag is already used to allocate some memory in these functions. While at it, remove a useless (void *) casting in the first hunk in so that the code is more consistent. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET Signed-off-by: David S. Miller

lan743x: Remove duplicated include from lan743x_main.c

2020-06-24T21:49:38Z

Remove duplicated include. Signed-off-by: YueHaibing Signed-off-by: David S. Miller