kernel.git/drivers/net/ethernet/micrel, branch linux-3.2.y

ethernet: micrel: fix some error codes

2016-04-30T22:05:20Z

commit 3af0d554c1ce11e9d0953381ff566271f9ab81a9 upstream. There were two issues here: 1) dma_mapping_error() return true/false but we want to return -ENOMEM 2) If dmaengine_prep_slave_sg() failed then "err" wasn't set but presumably that should be -ENOMEM as well. I changed the success path to "return 0;" instead of "return ret;" for clarity. Fixes: 94fe8c683cea ('ks8842: Support DMA when accessed via timberdale') Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller Signed-off-by: Ben Hutchings

ks8851: Fix interpretation of rxlen field.

2013-04-10T02:20:15Z

[ Upstream commit 14bc435ea54cb888409efb54fc6b76c13ef530e9 ] According to the Datasheet (page 52): 15-12 Reserved 11-0 RXBC Receive Byte Count This field indicates the present received frame byte size. The code has a bug: rxh = ks8851_rdreg32(ks, KS_RXFHSR); rxstat = rxh & 0xffff; rxlen = rxh >> 16; // BUG!!! 0xFFF mask should be applied Signed-off-by: Max Nekludov Signed-off-by: David S. Miller Signed-off-by: Ben Hutchings

ksz884x: don't copy too much in netdev_set_mac_address()

2012-05-11T12:14:27Z

[ Upstream commit 716af4abd6e6370226f567af50bfaca274515980 ] MAX_ADDR_LEN is 32. ETH_ALEN is 6. mac->sa_data is a 14 byte array, so the memcpy() is doing a read past the end of the array. I asked about this on netdev and Ben Hutchings told me it's supposed to be copying ETH_ALEN bytes (thanks Ben). Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller Signed-off-by: Ben Hutchings

net/ethernet: ks8851_mll fix rx frame buffer overflow

2012-05-11T12:14:24Z

[ Upstream commit 8a9a0ea6032186e3030419262678d652b88bf6a8 ] At the beginning of ks_rcv(), a for loop retrieves the header information relevant to all the frames stored in the mac's internal buffers. The number of pending frames is stored as an 8 bits field in KS_RXFCTR. If interrupts are disabled long enough to allow for more than 32 frames to accumulate in the MAC's internal buffers, a buffer overflow occurs. This patch fixes the problem by making the driver's frame_head_info buffer big enough. Well actually, since the chip appears to have 12K of internal rx buffers and the shortest ethernet frame should be 64 bytes long, maybe the limit could be set to 12*1024/64 = 192 frames, but 255 should be safer. Signed-off-by: Davide Ciminaghi Signed-off-by: Raffaele Recalcati Signed-off-by: David S. Miller Signed-off-by: Ben Hutchings

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2011-10-25T11:25:22Z

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1745 commits) dp83640: free packet queues on remove dp83640: use proper function to free transmit time stamping packets ipv6: Do not use routes from locally generated RAs |PATCH net-next] tg3: add tx_dropped counter be2net: don't create multiple RX/TX rings in multi channel mode be2net: don't create multiple TXQs in BE2 be2net: refactor VF setup/teardown code into be_vf_setup/clear() be2net: add vlan/rx-mode/flow-control config to be_setup() net_sched: cls_flow: use skb_header_pointer() ipv4: avoid useless call of the function check_peer_pmtu TCP: remove TCP_DEBUG net: Fix driver name for mdio-gpio.c ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT rtnetlink: Add missing manual netlink notification in dev_change_net_namespaces ipv4: fix ipsec forward performance regression jme: fix irq storm after suspend/resume route: fix ICMP redirect validation net: hold sock reference while processing tx timestamps tcp: md5: add more const attributes Add ethtool -g support to virtio_net ... Fix up conflicts in: - drivers/net/Kconfig: The split-up generated a trivial conflict with removal of a stale reference to Documentation/networking/net-modules.txt. Remove it from the new location instead. - fs/sysfs/dir.c: Fairly nasty conflicts with the sysfs rb-tree usage, conflicting with Eric Biederman's changes for tagged directories.

net: add skb frag size accessors

2011-10-19T07:10:46Z

To ease skb->truesize sanitization, its better to be able to localize all references to skb frags size. Define accessors : skb_frag_size() to fetch frag size, and skb_frag_size_{set|add|sub}() to manipulate it. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller

MII: fix Kconfig dependencies for MII

2011-09-15T19:49:08Z

MII Kconfig option is apart of the core networking drivers and by default NET_CORE is enabled so drivers selecting MII will have MII enabled as well. It was found using the randconfig option during testing, MII would be selected but NET_CORE could be disabled. This caused a dependency error. Resolved the dependency by selecting NET_CORE when MII is selected. Reported-by: Emil Tantilov Signed-off-by: Jeff Kirsher Tested-by: Aaron Brown Signed-off-by: David S. Miller

ksz884x: convert to SKB paged frag API.

2011-09-15T19:34:59Z

Signed-off-by: Ian Campbell Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller

drivers/net/ethernet/*: Enabled vendor Kconfig options

2011-08-27T07:58:56Z

Based on finds for Stephen Rothwell, where current defconfig's enable a ethernet driver and it is not compiled due to the newly added NET_VENDOR_* component of Kconfig. This patch enables all the "new" Kconfig options so that current defconfig's will continue to compile the expected drivers. In addition, by enabling all the new Kconfig options does not add any un-expected options. CC: Stephen Rothwll Signed-off-by: Jeff Kirsher

net: remove use of ndo_set_multicast_list in drivers

2011-08-18T03:22:03Z

replace it by ndo_set_rx_mode Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller