kernel.git/drivers/net/ethernet/mediatek, branch linux-5.0.y

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2019-01-15T17:13:36Z

Pull networking fixes from David Miller: 1) Fix regression in multi-SKB responses to RTM_GETADDR, from Arthur Gautier. 2) Fix ipv6 frag parsing in openvswitch, from Yi-Hung Wei. 3) Unbounded recursion in ipv4 and ipv6 GUE tunnels, from Stefano Brivio. 4) Use after free in hns driver, from Yonglong Liu. 5) icmp6_send() needs to handle the case of NULL skb, from Eric Dumazet. 6) Missing rcu read lock in __inet6_bind() when operating on mapped addresses, from David Ahern. 7) Memory leak in tipc-nl_compat_publ_dump(), from Gustavo A. R. Silva. 8) Fix PHY vs r8169 module loading ordering issues, from Heiner Kallweit. 9) Fix bridge vlan memory leak, from Ido Schimmel. 10) Dev refcount leak in AF_PACKET, from Jason Gunthorpe. 11) Infoleak in ipv6_local_error(), flow label isn't completely initialized. From Eric Dumazet. 12) Handle mv88e6390 errata, from Andrew Lunn. 13) Making vhost/vsock CID hashing consistent, from Zha Bin. 14) Fix lack of UMH cleanup when it unexpectedly exits, from Taehee Yoo. 15) Bridge forwarding must clear skb->tstamp, from Paolo Abeni. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits) bnxt_en: Fix context memory allocation. bnxt_en: Fix ring checking logic on 57500 chips. mISDN: hfcsusb: Use struct_size() in kzalloc() net: clear skb->tstamp in bridge forwarding path net: bpfilter: disallow to remove bpfilter module while being used net: bpfilter: restart bpfilter_umh when error occurred net: bpfilter: use cleanup callback to release umh_info umh: add exit routine for UMH process isdn: i4l: isdn_tty: Fix some concurrency double-free bugs vhost/vsock: fix vhost vsock cid hashing inconsistent net: stmmac: Prevent RX starvation in stmmac_napi_poll() net: stmmac: Fix the logic of checking if RX Watchdog must be enabled net: stmmac: Check if CBS is supported before configuring net: stmmac: dwxgmac2: Only clear interrupts that are active net: stmmac: Fix PCI module removal leak tools/bpf: fix bpftool map dump with bitfields tools/bpf: test btf bitfield with >=256 struct member offset bpf: fix bpffs bitfield pretty print net: ethernet: mediatek: fix warning in phy_start_aneg tcp: change txhash on SYN-data timeout ...

net: ethernet: mediatek: fix warning in phy_start_aneg

2019-01-10T21:57:24Z

linux 5.0-rc1 shows following warning on bpi-r2/mt7623 bootup: [ 5.170597] WARNING: CPU: 3 PID: 1 at drivers/net/phy/phy.c:548 phy_start_aneg+0x110/0x144 [ 5.178826] called from state READY .... [ 5.264111] [] (phy_start_aneg) from [] (mtk_init+0x414/0x47c) [ 5.271630] r7:df5f5eec r6:c0f08c48 r5:00000000 r4:dea67800 [ 5.277256] [] (mtk_init) from [] (register_netdevice+0x98/0x51c) [ 5.285035] r8:00000000 r7:00000000 r6:c0f97080 r5:c0f08c48 r4:dea67800 [ 5.291693] [] (register_netdevice) from [] (register_netdev+0x2c/0x44) [ 5.299989] r8:00000000 r7:dea2e608 r6:deacea00 r5:dea2e604 r4:dea67800 [ 5.306646] [] (register_netdev) from [] (mtk_probe+0x668/0x7ac) [ 5.314336] r5:dea2e604 r4:dea2e040 [ 5.317890] [] (mtk_probe) from [] (platform_drv_probe+0x58/0xa8) [ 5.325670] r10:c0f86bac r9:00000000 r8:c0fbe578 r7:00000000 r6:c0f86bac r5:00000000 [ 5.333445] r4:deacea10 [ 5.335963] [] (platform_drv_probe) from [] (really_probe+0x2d8/0x424) maybe other boards using this generic driver are affected v2: optimization: - phy_set_max_speed() is only needed if you want to reduce the max speed, typically if the PHY supports 1Gbps but the MAC supports 100Mbps only. - The pause parameters are autonegotiated. Except you have a specific need you normally don't need to manually fiddle with this. - phy_start_aneg() is called implicitly by the phylib state machine, you shouldn't call it manually except you have a good excuse. - netif_carrier_on/netif_carrier_off in mtk_phy_link_adjust() isn't needed. It's done by phy_link_change() in phylib. Signed-off-by: Frank Wunderlich Reviewed-by: Heiner Kallweit Acked-by: Sean Wang Signed-off-by: David S. Miller

cross-tree: phase out dma_zalloc_coherent()

2019-01-08T12:58:37Z

We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig Signed-off-by: Luis Chamberlain [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig

net: ethernet: Convert phydev advertize and supported from u32 to link mode

2018-11-11T18:10:01Z

There are a few MAC/PHYs combinations which now support > 1Gbps. These may need to make use of link modes with bits > 31. Thus their supported PHY features or advertised features cannot be implemented using the current bitmap in a u32. Convert to using a linkmode bitmap, which can support all the currently devices link modes, and is future proof as more modes are added. Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: Add helper for advertise to lcl value

2018-10-02T05:55:36Z

Add a helper to convert the local advertising to an LCL capabilities, which is then used to resolve pause flow control settings. Signed-off-by: Andrew Lunn Reviewed-by: Florian Fainelli Reviewed-by: Maxime Chevallier Signed-off-by: David S. Miller

net: ethernet: Add helper for MACs which support asym pause

2018-09-13T03:24:21Z

Rather than have the MAC drivers manipulate phydev members to indicate they support Asym Pause, add a helper function. Signed-off-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: ethernet: Fix up drivers masking pause support

2018-09-13T03:24:21Z

PHY drivers don't indicate they support pause. They expect MAC drivers to enable its support if the MAC has the needed hardware. Thus MAC drivers should not mask Pause support, but enable it. Change a few ANDs to ORs. Signed-off-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: ethernet: Use phy_set_max_speed() to limit advertised speed

2018-09-13T03:24:20Z

Many Ethernet MAC drivers want to limit the PHY to only advertise a maximum speed of 100Mbs or 1Gbps. Rather than using a mask, make use of the helper function phy_set_max_speed(). Signed-off-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: ethernet: Convert to using %pOFn instead of device_node.name

2018-08-30T02:41:30Z

In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: "David S. Miller" Cc: Yisen Zhuang Cc: Salil Mehta Cc: Sebastian Hesselbarth Cc: Felix Fietkau Cc: John Crispin Cc: Sean Wang Cc: Nelson Chang Cc: Matthias Brugger Cc: Wingman Kwok Cc: Murali Karicheri Cc: netdev@vger.kernel.org Signed-off-by: Rob Herring Reviewed-by: Matthias Brugger Acked-by: Sean Wang Signed-off-by: David S. Miller

net-next: mediatek: cleanup unnecessary get chip id and its user

2018-07-29T20:15:57Z

Since driver is devicetree-based, all device type and charateristic can be determined by the compatible string and its data. It's unnecessary to create another dependent function to check chip ID and then decide whether the specific funciton is being supported on a certain device. It can be totally replaced by the existing flag, so a cleanup is made by removing the function and the only user, HWLRO. MT2701 also have a missing HWLRO support in old code, so add it the same patch. Signed-off-by: Sean Wang Signed-off-by: David S. Miller