kernel.git/drivers/net/ethernet/marvell, branch master

net: mvpp2: guard flow control update with global_tx_fc in buffer switching

2026-03-19T09:31:19Z

mvpp2_bm_switch_buffers() unconditionally calls mvpp2_bm_pool_update_priv_fc() when switching between per-cpu and shared buffer pool modes. This function programs CM3 flow control registers via mvpp2_cm3_read()/mvpp2_cm3_write(), which dereference priv->cm3_base without any NULL check. When the CM3 SRAM resource is not present in the device tree (the third reg entry added by commit 60523583b07c ("dts: marvell: add CM3 SRAM memory to cp11x ethernet device tree")), priv->cm3_base remains NULL and priv->global_tx_fc is false. Any operation that triggers mvpp2_bm_switch_buffers(), for example an MTU change that crosses the jumbo frame threshold, will crash: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000096000006 EC = 0x25: DABT (current EL), IL = 32 bits pc : readl+0x0/0x18 lr : mvpp2_cm3_read.isra.0+0x14/0x20 Call trace: readl+0x0/0x18 mvpp2_bm_pool_update_fc+0x40/0x12c mvpp2_bm_pool_update_priv_fc+0x94/0xd8 mvpp2_bm_switch_buffers.isra.0+0x80/0x1c0 mvpp2_change_mtu+0x140/0x380 __dev_set_mtu+0x1c/0x38 dev_set_mtu_ext+0x78/0x118 dev_set_mtu+0x48/0xa8 dev_ifsioc+0x21c/0x43c dev_ioctl+0x2d8/0x42c sock_ioctl+0x314/0x378 Every other flow control call site in the driver already guards hardware access with either priv->global_tx_fc or port->tx_fc. mvpp2_bm_switch_buffers() is the only place that omits this check. Add the missing priv->global_tx_fc guard to both the disable and re-enable calls in mvpp2_bm_switch_buffers(), consistent with the rest of the driver. Fixes: 3a616b92a9d1 ("net: mvpp2: Add TX flow control support for jumbo frames") Signed-off-by: Muhammad Hammad Ijaz Reviewed-by: Gunnar Kudrjavets Link: https://patch.msgid.link/20260316193157.65748-1-mhijaz@amazon.com Signed-off-by: Paolo Abeni

octeontx2-af: devlink: fix NIX RAS reporter to use RAS interrupt status

2026-03-12T03:39:19Z

The NIX RAS health report path uses nix_af_rvu_err when handling the NIX_AF_RVU_RAS case, so the report prints the ERR interrupt status rather than the RAS interrupt status. Use nix_af_rvu_ras for the NIX_AF_RVU_RAS report. Fixes: 5ed66306eab6 ("octeontx2-af: Add devlink health reporters for NIX") Signed-off-by: Alok Tiwari Link: https://patch.msgid.link/20260310184824.1183651-2-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski

octeontx2-af: devlink: fix NIX RAS reporter recovery condition

2026-03-12T03:39:19Z

The NIX RAS health reporter recovery routine checks nix_af_rvu_int to decide whether to re-enable NIX_AF_RAS interrupts. This is the RVU interrupt status field and is unrelated to RAS events, so the recovery flow may incorrectly skip re-enabling NIX_AF_RAS interrupts. Check nix_af_rvu_ras instead before writing NIX_AF_RAS_ENA_W1S. Fixes: 5ed66306eab6 ("octeontx2-af: Add devlink health reporters for NIX") Signed-off-by: Alok Tiwari Link: https://patch.msgid.link/20260310184824.1183651-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski

octeon_ep_vf: avoid compiler and IQ/OQ reordering

2026-03-03T10:34:20Z

Utilize READ_ONCE and WRITE_ONCE APIs for IO queue Tx/Rx variable access to prevent compiler optimization and reordering. Additionally, ensure IO queue OUT/IN_CNT registers are flushed by performing a read-back after writing. The compiler could reorder reads/writes to pkts_pending, last_pkt_count, etc., causing stale values to be used when calculating packets to process or register updates to send to hardware. The Octeon hardware requires a read-back after writing to OUT_CNT/IN_CNT registers to ensure the write has been flushed through any posted write buffers before the interrupt resend bit is set. Without this, we have observed cases where the hardware didn't properly update its internal state. wmb/rmb only provides ordering guarantees but doesn't prevent the compiler from performing optimizations like caching in registers, load tearing etc. Fixes: 1cd3b407977c3 ("octeon_ep_vf: add Tx/Rx processing and interrupt support") Signed-off-by: Sathesh Edara Signed-off-by: Shinas Rasheed Signed-off-by: Vimlesh Kumar Link: https://patch.msgid.link/20260227091402.1773833-5-vimleshk@marvell.com Signed-off-by: Paolo Abeni

octeon_ep_vf: Relocate counter updates before NAPI

2026-03-03T10:34:20Z

Relocate IQ/OQ IN/OUT_CNTS updates to occur before NAPI completion. Moving the IQ/OQ counter updates before napi_complete_done ensures 1. Counter registers are updated before re-enabling interrupts. 2. Prevents a race where new packets arrive but counters aren't properly synchronized. Fixes: 1cd3b407977c3 ("octeon_ep_vf: add Tx/Rx processing and interrupt support") Signed-off-by: Sathesh Edara Signed-off-by: Shinas Rasheed Signed-off-by: Vimlesh Kumar Link: https://patch.msgid.link/20260227091402.1773833-4-vimleshk@marvell.com Signed-off-by: Paolo Abeni

octeon_ep: avoid compiler and IQ/OQ reordering

2026-03-03T10:34:20Z

Utilize READ_ONCE and WRITE_ONCE APIs for IO queue Tx/Rx variable access to prevent compiler optimization and reordering. Additionally, ensure IO queue OUT/IN_CNT registers are flushed by performing a read-back after writing. The compiler could reorder reads/writes to pkts_pending, last_pkt_count, etc., causing stale values to be used when calculating packets to process or register updates to send to hardware. The Octeon hardware requires a read-back after writing to OUT_CNT/IN_CNT registers to ensure the write has been flushed through any posted write buffers before the interrupt resend bit is set. Without this, we have observed cases where the hardware didn't properly update its internal state. wmb/rmb only provides ordering guarantees but doesn't prevent the compiler from performing optimizations like caching in registers, load tearing etc. Fixes: 37d79d0596062 ("octeon_ep: add Tx/Rx processing and interrupt support") Signed-off-by: Sathesh Edara Signed-off-by: Shinas Rasheed Signed-off-by: Vimlesh Kumar Link: https://patch.msgid.link/20260227091402.1773833-3-vimleshk@marvell.com Signed-off-by: Paolo Abeni

octeon_ep: Relocate counter updates before NAPI

2026-03-03T10:34:20Z

Relocate IQ/OQ IN/OUT_CNTS updates to occur before NAPI completion, and replace napi_complete with napi_complete_done. Moving the IQ/OQ counter updates before napi_complete_done ensures 1. Counter registers are updated before re-enabling interrupts. 2. Prevents a race where new packets arrive but counters aren't properly synchronized. napi_complete_done (vs napi_complete) allows for better interrupt coalescing. Fixes: 37d79d0596062 ("octeon_ep: add Tx/Rx processing and interrupt support") Signed-off-by: Sathesh Edara Signed-off-by: Shinas Rasheed Signed-off-by: Vimlesh Kumar Link: https://patch.msgid.link/20260227091402.1773833-2-vimleshk@marvell.com Signed-off-by: Paolo Abeni

Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses

2026-02-22T16:26:33Z

Conversion performed via this Coccinelle script: // SPDX-License-Identifier: GPL-2.0-only // Options: --include-headers-for-types --all-includes --include-headers --keep-comments virtual patch @gfp depends on patch && !(file in "tools") && !(file in "samples")@ identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex, kzalloc_obj,kzalloc_objs,kzalloc_flex, kvmalloc_obj,kvmalloc_objs,kvmalloc_flex, kvzalloc_obj,kvzalloc_objs,kvzalloc_flex}; @@ ALLOC(... - , GFP_KERNEL ) $ make coccicheck MODE=patch COCCI=gfp.cocci Build and boot tested x86_64 with Fedora 42's GCC and Clang: Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01 Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01 Signed-off-by: Kees Cook Signed-off-by: Linus Torvalds

Convert more 'alloc_obj' cases to default GFP_KERNEL arguments

2026-02-22T04:03:00Z

This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds

Convert 'alloc_obj' family to use the new default GFP_KERNEL argument

2026-02-22T01:09:51Z

This was done entirely with mindless brute force, using git grep -l '\