kernel.git/drivers/net/ethernet/intel, branch linux-5.3.y

i40e: Fix for ethtool -m issue on X722 NIC

2019-12-04T21:34:04Z

[ Upstream commit 4c9da6f2b8a029052c75bd4a61ae229135831177 ] This patch contains fix for a problem with command: 'ethtool -m ' which breaks functionality of: 'ethtool ' when called on X722 NIC Disallowed update of link phy_types on X722 NIC Currently correct value cannot be obtained from FW Previously wrong value returned by FW was used and was a root cause for incorrect output of 'ethtool ' command Signed-off-by: Arkadiusz Kubalewski Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin

iavf: initialize ITRN registers with correct values

2019-12-04T21:34:03Z

[ Upstream commit 4eda4e0096842764d725bcfd77471a419832b074 ] Since commit 92418fb14750 ("i40e/i40evf: Use usec value instead of reg value for ITR defines") the driver tracks the interrupt throttling intervals in single usec units, although the actual ITRN registers are programmed in 2 usec units. Most register programming flows in the driver correctly handle the conversion, although it is currently not applied when the registers are initialized to their default values. Most of the time this doesn't present a problem since the default values are usually immediately overwritten through the standard adaptive throttling mechanism, or updated manually by the user, but if adaptive throttling is disabled and the interval values are left alone then the incorrect value will persist. Since the intended default interval of 50 usecs (vs. 100 usecs as programmed) performs better for most traffic workloads, this can lead to performance regressions. This patch adds the correct conversion when writing the initial values to the ITRN registers. Signed-off-by: Nicholas Nunley Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin

ice: fix potential infinite loop because loop counter being too small

2019-12-04T21:34:02Z

[ Upstream commit 615457a226f042bffc3a1532afb244cab37460d4 ] Currently the for-loop counter i is a u8 however it is being checked against a maximum value hw->num_tx_sched_layers which is a u16. Hence there is a potential wrap-around of counter i back to zero if hw->num_tx_sched_layers is greater than 255. Fix this by making i a u16. Addresses-Coverity: ("Infinite loop") Fixes: b36c598c999c ("ice: Updates to Tx scheduler code") Signed-off-by: Colin Ian King Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin

e1000: fix memory leaks

2019-11-12T18:28:19Z

[ Upstream commit 8472ba62154058b64ebb83d5f57259a352d28697 ] In e1000_set_ringparam(), 'tx_old' and 'rx_old' are not deallocated if e1000_up() fails, leading to memory leaks. Refactor the code to fix this issue. Signed-off-by: Wenwen Wang Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin

igb: Fix constant media auto sense switching when no cable is connected

2019-11-12T18:28:19Z

[ Upstream commit 8d5cfd7f76a2414e23c74bb8858af7540365d985 ] At least on the i350 there is an annoying behavior that is maybe also present on 82580 devices, but was probably not noticed yet as MAS is not widely used. If no cable is connected on both fiber/copper ports the media auto sense code will constantly swap between them as part of the watchdog task and produce many unnecessary kernel log messages. The swap code responsible for this behavior (switching to fiber) should not be executed if the current media type is copper and there is no signal detected on the fiber port. In this case we can safely wait until the AUTOSENSE_EN bit is cleared. Signed-off-by: Manfred Rudigier Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin

i40e: check __I40E_VF_DISABLE bit in i40e_sync_filters_subtask

2019-10-05T13:12:29Z

commit a7542b87607560d0b89e7ff81d870bd6ff8835cb upstream. While testing VF spawn/destroy the following panic occurred. BUG: unable to handle kernel NULL pointer dereference at 0000000000000029 [...] Workqueue: i40e i40e_service_task [i40e] RIP: 0010:i40e_sync_vsi_filters+0x6fd/0xc60 [i40e] [...] Call Trace: ? __switch_to_asm+0x35/0x70 ? __switch_to_asm+0x41/0x70 ? __switch_to_asm+0x35/0x70 ? _cond_resched+0x15/0x30 i40e_sync_filters_subtask+0x56/0x70 [i40e] i40e_service_task+0x382/0x11b0 [i40e] ? __switch_to_asm+0x41/0x70 ? __switch_to_asm+0x41/0x70 process_one_work+0x1a7/0x3b0 worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x112/0x130 ? kthread_bind+0x30/0x30 ret_from_fork+0x35/0x40 Investigation revealed a race where pf->vf[vsi->vf_id].trusted may get accessed by the watchdog via i40e_sync_filters_subtask() although i40e_free_vfs() already free'd pf->vf. To avoid this the call to i40e_sync_vsi_filters() in i40e_sync_filters_subtask() needs to be guarded by __I40E_VF_DISABLE, which is also used by i40e_free_vfs(). Note: put the __I40E_VF_DISABLE check after the __I40E_MACVLAN_SYNC_PENDING check as the latter is more likely to trigger. CC: stable@vger.kernel.org Signed-off-by: Stefan Assmann Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: Greg Kroah-Hartman

e1000e: add workaround for possible stalled packet

2019-10-05T13:12:08Z

[ Upstream commit e5e9a2ecfe780975820e157b922edee715710b66 ] This works around a possible stalled packet issue, which may occur due to clock recovery from the PCH being too slow, when the LAN is transitioning from K1 at 1G link speed. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204057 Signed-off-by: Kai-Heng Feng Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin

ixgbevf: Fix secpath usage for IPsec Tx offload

2019-09-13T13:52:10Z

Port the same fix for ixgbe to ixgbevf. The ixgbevf driver currently does IPsec Tx offloading based on an existing secpath. However, the secpath can also come from the Rx side, in this case it is misinterpreted for Tx offload and the packets are dropped with a "bad sa_idx" error. Fix this by using the xfrm_offload() function to test for Tx offload. CC: Shannon Nelson Fixes: 7f68d4306701 ("ixgbevf: enable VF IPsec offload operations") Reported-by: Jonathan Tooker Signed-off-by: Jeff Kirsher Acked-by: Shannon Nelson Signed-off-by: David S. Miller

ixgbe: Fix secpath usage for IPsec TX offload.

2019-09-12T11:43:14Z

The ixgbe driver currently does IPsec TX offloading based on an existing secpath. However, the secpath can also come from the RX side, in this case it is misinterpreted for TX offload and the packets are dropped with a "bad sa_idx" error. Fix this by using the xfrm_offload() function to test for TX offload. Fixes: 592594704761 ("ixgbe: process the Tx ipsec offload") Reported-by: Michael Marley Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller

ixgbe: fix double clean of Tx descriptors with xdp

2019-09-11T16:42:18Z

Tx code doesn't clear the descriptors' status after cleaning. So, if the budget is larger than number of used elems in a ring, some descriptors will be accounted twice and xsk_umem_complete_tx will move prod_tail far beyond the prod_head breaking the completion queue ring. Fix that by limiting the number of descriptors to clean by the number of used descriptors in the Tx ring. 'ixgbe_clean_xdp_tx_irq()' function refactored to look more like 'ixgbe_xsk_clean_tx_ring()' since we're allowed to directly use 'next_to_clean' and 'next_to_use' indexes. CC: stable@vger.kernel.org Fixes: 8221c5eba8c1 ("ixgbe: add AF_XDP zero-copy Tx support") Signed-off-by: Ilya Maximets Tested-by: William Tu Tested-by: Eelco Chaudron Signed-off-by: Jeff Kirsher