kernel.git/drivers/net/ethernet/intel, branch linux-5.17.y

ixgbe: fix unexpected VLAN Rx in promisc mode on VF

2022-06-14T16:41:48Z

commit 7bb0fb7c63df95d6027dc50d6af3bc3bbbc25483 upstream. When the promiscuous mode is enabled on a VF, the IXGBE_VMOLR_VPE bit (VLAN Promiscuous Enable) is set. This means that the VF will receive packets whose VLAN is not the same than the VLAN of the VF. For instance, in this situation: ┌────────┐ ┌────────┐ ┌────────┐ │ │ │ │ │ │ │ │ │ │ │ │ │ VF0├────┤VF1 VF2├────┤VF3 │ │ │ │ │ │ │ └────────┘ └────────┘ └────────┘ VM1 VM2 VM3 vf 0: vlan 1000 vf 1: vlan 1000 vf 2: vlan 1001 vf 3: vlan 1001 If we tcpdump on VF3, we see all the packets, even those transmitted on vlan 1000. This behavior prevents to bridge VF1 and VF2 in VM2, because it will create a loop: packets transmitted on VF1 will be received by VF2 and vice-versa, and bridged again through the software bridge. This patch remove the activation of VLAN Promiscuous when a VF enables the promiscuous mode. However, the IXGBE_VMOLR_UPE bit (Unicast Promiscuous) is kept, so that a VF receives all packets that has the same VLAN, whatever the destination MAC address. Fixes: 8443c1a4b192 ("ixgbe, ixgbevf: Add new mbox API xcast mode") Cc: stable@vger.kernel.org Cc: Nicolas Dichtel Signed-off-by: Olivier Matz Tested-by: Konrad Jankowski Signed-off-by: Tony Nguyen Signed-off-by: Greg Kroah-Hartman

ixgbe: fix bcast packets Rx on VF after promisc removal

2022-06-14T16:41:48Z

commit 803e9895ea2b0fe80bc85980ae2d7a7e44037914 upstream. After a VF requested to remove the promiscuous flag on an interface, the broadcast packets are not received anymore. This breaks some protocols like ARP. In ixgbe_update_vf_xcast_mode(), we should keep the IXGBE_VMOLR_BAM bit (Broadcast Accept) on promiscuous removal. This flag is already set by default in ixgbe_set_vmolr() on VF reset. Fixes: 8443c1a4b192 ("ixgbe, ixgbevf: Add new mbox API xcast mode") Cc: stable@vger.kernel.org Cc: Nicolas Dichtel Signed-off-by: Olivier Matz Tested-by: Konrad Jankowski Signed-off-by: Tony Nguyen Signed-off-by: Greg Kroah-Hartman

i40e: xsk: Move tmp desc array from driver to pool

2022-06-14T16:41:31Z

[ Upstream commit d1bc532e99becf104635ed4da6fefa306f452321 ] Move desc_array from the driver to the pool. The reason behind this is that we can then reuse this array as a temporary storage for descriptors in all zero-copy drivers that use the batched interface. This will make it easier to add batching to more drivers. i40e is the only driver that has a batched Tx zero-copy implementation, so no need to touch any other driver. Signed-off-by: Magnus Karlsson Signed-off-by: Daniel Borkmann Reviewed-by: Alexander Lobakin Link: https://lore.kernel.org/bpf/20220125160446.78976-6-maciej.fijalkowski@intel.com Signed-off-by: Sasha Levin

igb: skip phy status check where unavailable

2022-05-25T07:59:10Z

[ Upstream commit 942d2ad5d2e0df758a645ddfadffde2795322728 ] igb_read_phy_reg() will silently return, leaving phy_data untouched, if hw->ops.read_reg isn't set. Depending on the uninitialized value of phy_data, this led to the phy status check either succeeding immediately or looping continuously for 2 seconds before emitting a noisy err-level timeout. This message went out to the console even though there was no actual problem. Instead, first check if there is read_reg function pointer. If not, proceed without trying to check the phy status register. Fixes: b72f3f72005d ("igb: When GbE link up, wait for Remote receiver status condition") Signed-off-by: Kevin Mitchell Tested-by: Gurucharan (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

ice: Fix interrupt moderation settings getting cleared

2022-05-25T07:59:08Z

[ Upstream commit bf13502ed5f941b0777b3fd1e24dac5d93f3886c ] Adaptive-rx and Adaptive-tx are interrupt moderation settings that can be enabled/disabled using ethtool: ethtool -C ethX adaptive-rx on/off adaptive-tx on/off Unfortunately those settings are getting cleared after changing number of queues, or in ethtool world 'channels': ethtool -L ethX rx 1 tx 1 Clearing was happening due to introduction of bit fields in ice_ring_container struct. This way only itr_setting bits were rebuilt during ice_vsi_rebuild_set_coalesce(). Introduce an anonymous struct of bitfields and create a union to refer to them as a single variable. This way variable can be easily saved and restored. Fixes: 61dc79ced7aa ("ice: Restore interrupt throttle settings after VSI rebuild") Signed-off-by: Michal Wilczynski Tested-by: Gurucharan (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin

ice: fix possible under reporting of ethtool Tx and Rx statistics

2022-05-25T07:59:08Z

[ Upstream commit 31b6298fd8e29effe9ed6b77351ac5969be56ce0 ] The hardware statistics counters are not cleared during resets so the drivers first access is to initialize the baseline and then subsequent reads are for reporting the counters. The statistics counters are read during the watchdog subtask when the interface is up. If the baseline is not initialized before the interface is up, then there can be a brief window in which some traffic can be transmitted/received before the initial baseline reading takes place. Directly initialize ethtool statistics in driver open so the baseline will be initialized when the interface is up, and any dropped packets incremented before the interface is up won't be reported. Fixes: 28dc1b86f8ea9 ("ice: ignore dropped packets during init") Signed-off-by: Paul Greenwalt Tested-by: Gurucharan (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin

ice: fix crash when writing timestamp on RX rings

2022-05-25T07:59:08Z

[ Upstream commit 4503cc7fdf9a84cd631b0cb8ecb3c9b1bdbf3594 ] Do not allow to write timestamps on RX rings if PF is being configured. When PF is being configured RX rings can be freed or rebuilt. If at the same time timestamps are updated, the kernel will crash by dereferencing null RX ring pointer. PID: 1449 TASK: ff187d28ed658040 CPU: 34 COMMAND: "ice-ptp-0000:51" #0 [ff1966a94a713bb0] machine_kexec at ffffffff9d05a0be #1 [ff1966a94a713c08] __crash_kexec at ffffffff9d192e9d #2 [ff1966a94a713cd0] crash_kexec at ffffffff9d1941bd #3 [ff1966a94a713ce8] oops_end at ffffffff9d01bd54 #4 [ff1966a94a713d08] no_context at ffffffff9d06bda4 #5 [ff1966a94a713d60] __bad_area_nosemaphore at ffffffff9d06c10c #6 [ff1966a94a713da8] do_page_fault at ffffffff9d06cae4 #7 [ff1966a94a713de0] page_fault at ffffffff9da0107e [exception RIP: ice_ptp_update_cached_phctime+91] RIP: ffffffffc076db8b RSP: ff1966a94a713e98 RFLAGS: 00010246 RAX: 16e3db9c6b7ccae4 RBX: ff187d269dd3c180 RCX: ff187d269cd4d018 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ff187d269cfcc644 R8: ff187d339b9641b0 R9: 0000000000000000 R10: 0000000000000002 R11: 0000000000000000 R12: ff187d269cfcc648 R13: ffffffff9f128784 R14: ffffffff9d101b70 R15: ff187d269cfcc640 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ff1966a94a713ea0] ice_ptp_periodic_work at ffffffffc076dbef [ice] #9 [ff1966a94a713ee0] kthread_worker_fn at ffffffff9d101c1b #10 [ff1966a94a713f10] kthread at ffffffff9d101b4d #11 [ff1966a94a713f50] ret_from_fork at ffffffff9da0023f Fixes: 77a781155a65 ("ice: enable receive hardware timestamping") Signed-off-by: Arkadiusz Kubalewski Reviewed-by: Michal Schmidt Tested-by: Dave Cain Tested-by: Gurucharan (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin

i40e: i40e_main: fix a missing check on list iterator

2022-05-18T08:28:21Z

commit 3f95a7472d14abef284d8968734fe2ae7ff4845f upstream. The bug is here: ret = i40e_add_macvlan_filter(hw, ch->seid, vdev->dev_addr, &aq_err); The list iterator 'ch' will point to a bogus position containing HEAD if the list is empty or no element is found. This case must be checked before any use of the iterator, otherwise it will lead to a invalid memory access. To fix this bug, use a new variable 'iter' as the list iterator, while use the origin variable 'ch' as a dedicated pointer to point to the found element. Cc: stable@vger.kernel.org Fixes: 1d8d80b4e4ff6 ("i40e: Add macvlan support on i40e") Signed-off-by: Xiaomeng Tong Tested-by: Gurucharan (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Link: https://lore.kernel.org/r/20220510204846.2166999-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

ice: fix PTP stale Tx timestamps cleanup

2022-05-18T08:28:13Z

[ Upstream commit a11b6c1a383ff092f432e040c20e032503785d47 ] Read stale PTP Tx timestamps from PHY on cleanup. After running out of Tx timestamps request handlers, hardware (HW) stops reporting finished requests. Function ice_ptp_tx_tstamp_cleanup() used to only clean up stale handlers in driver and was leaving the hardware registers not read. Not reading stale PTP Tx timestamps prevents next interrupts from arriving and makes timestamping unusable. Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices") Signed-off-by: Michal Michalik Reviewed-by: Jacob Keller Reviewed-by: Paul Menzel Tested-by: Gurucharan (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin

ice: clear stale Tx queue settings before configuring

2022-05-18T08:28:13Z

[ Upstream commit 6096dae926a22e2892ef9169f582589c16d39639 ] The iAVF driver uses 3 virtchnl op codes to communicate with the PF regarding the VF Tx queues: * VIRTCHNL_OP_CONFIG_VSI_QUEUES configures the hardware and firmware logic for the Tx queues * VIRTCHNL_OP_ENABLE_QUEUES configures the queue interrupts * VIRTCHNL_OP_DISABLE_QUEUES disables the queue interrupts and Tx rings. There is a bug in the iAVF driver due to the race condition between VF reset request and shutdown being executed in parallel. This leads to a break in logic and VIRTCHNL_OP_DISABLE_QUEUES is not being sent. If this occurs, the PF driver never cleans up the Tx queues. This results in leaving behind stale Tx queue settings in the hardware and firmware. The most obvious outcome is that upon the next VIRTCHNL_OP_CONFIG_VSI_QUEUES, the PF will fail to program the Tx scheduler node due to a lack of space. We need to protect ICE driver against such situation. To fix this, make sure we clear existing stale settings out when handling VIRTCHNL_OP_CONFIG_VSI_QUEUES. This ensures we remove the previous settings. Calling ice_vf_vsi_dis_single_txq should be safe as it will do nothing if the queue is not configured. The function already handles the case when the Tx queue is not currently configured and exits with a 0 return in that case. Fixes: 7ad15440acf8 ("ice: Refactor VIRTCHNL_OP_CONFIG_VSI_QUEUES handling") Signed-off-by: Jacob Keller Signed-off-by: Anatolii Gerasymenko Tested-by: Konrad Jankowski Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin