kernel.git/drivers/net/ethernet/intel, branch linux-4.13.y

ixgbe: Initialize 64-bit stats seqcounts

2017-08-02T03:06:07Z

On 32-bit hosts and with CONFIG_DEBUG_LOCK_ALLOC we should be seeing a lockdep splat indicating this seqcount is not correctly initialized, fix that. Fixes: 4197aa7bb818 ("ixgbevf: provide 64 bit statistics") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

i40e: Initialize 64-bit statistics TX ring seqcount

2017-08-02T03:06:06Z

On 32-bit hosts and with CONFIG_DEBUG_LOCK_ALLOC we should be seeing a lockdep splat indicating this seqcount is not correctly initialized, fix that. Fixes: 980e9b118642 ("i40e: Add support for 64 bit netstats") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

Merge tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2017-07-08T22:51:57Z

Pull PCI updates from Bjorn Helgaas: - add sysfs max_link_speed/width, current_link_speed/width (Wong Vee Khee) - make host bridge IRQ mapping much more generic (Matthew Minter, Lorenzo Pieralisi) - convert most drivers to pci_scan_root_bus_bridge() (Lorenzo Pieralisi) - mutex sriov_configure() (Jakub Kicinski) - mutex pci_error_handlers callbacks (Christoph Hellwig) - split ->reset_notify() into ->reset_prepare()/reset_done() (Christoph Hellwig) - support multiple PCIe portdrv interrupts for MSI as well as MSI-X (Gabriele Paoloni) - allocate MSI/MSI-X vector for Downstream Port Containment (Gabriele Paoloni) - fix MSI IRQ affinity pre/post/min_vecs issue (Michael Hernandez) - test INTx masking during enumeration, not at run-time (Piotr Gregor) - avoid using device_may_wakeup() for runtime PM (Rafael J. Wysocki) - restore the status of PCI devices across hibernation (Chen Yu) - keep parent resources that start at 0x0 (Ard Biesheuvel) - enable ECRC only if device supports it (Bjorn Helgaas) - restore PRI and PASID state after Function-Level Reset (CQ Tang) - skip DPC event if device is not present (Keith Busch) - check domain when matching SMBIOS info (Sujith Pandel) - mark Intel XXV710 NIC INTx masking as broken (Alex Williamson) - avoid AMD SB7xx EHCI USB wakeup defect (Kai-Heng Feng) - work around long-standing Macbook Pro poweroff issue (Bjorn Helgaas) - add Switchtec "running" status flag (Logan Gunthorpe) - fix dra7xx incorrect RW1C IRQ register usage (Arvind Yadav) - modify xilinx-nwl IRQ chip for legacy interrupts (Bharat Kumar Gogada) - move VMD SRCU cleanup after bus, child device removal (Jon Derrick) - add Faraday clock handling (Linus Walleij) - configure Rockchip MPS and reorganize (Shawn Lin) - limit Qualcomm TLP size to 2K (hardware issue) (Srinivas Kandagatla) - support Tegra MSI 64-bit addressing (Thierry Reding) - use Rockchip normal (not privileged) register bank (Shawn Lin) - add HiSilicon Kirin SoC PCIe controller driver (Xiaowei Song) - add Sigma Designs Tango SMP8759 PCIe controller driver (Marc Gonzalez) - add MediaTek PCIe host controller support (Ryder Lee) - add Qualcomm IPQ4019 support (John Crispin) - add HyperV vPCI protocol v1.2 support (Jork Loeser) - add i.MX6 regulator support (Quentin Schulz) * tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits) PCI: tango: Add Sigma Designs Tango SMP8759 PCIe host bridge support PCI: Add DT binding for Sigma Designs Tango PCIe controller PCI: rockchip: Use normal register bank for config accessors dt-bindings: PCI: Add documentation for MediaTek PCIe PCI: Remove __pci_dev_reset() and pci_dev_reset() PCI: Split ->reset_notify() method into ->reset_prepare() and ->reset_done() PCI: xilinx: Make of_device_ids const PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts PCI: vmd: Move SRCU cleanup after bus, child device removal PCI: vmd: Correct comment: VMD domains start at 0x10000, not 0x1000 PCI: versatile: Add local struct device pointers PCI: tegra: Do not allocate MSI target memory PCI: tegra: Support MSI 64-bit addressing PCI: rockchip: Use local struct device pointer consistently PCI: rockchip: Check for clk_prepare_enable() errors during resume MAINTAINERS: Remove Wenrui Li as Rockchip PCIe driver maintainer PCI: rockchip: Configure RC's MPS setting PCI: rockchip: Reconfigure configuration space header type PCI: rockchip: Split out rockchip_pcie_cfg_configuration_accesses() PCI: rockchip: Move configuration accesses into rockchip_pcie_cfg_atu() ...

PCI: Split ->reset_notify() method into ->reset_prepare() and ->reset_done()

2017-07-03T12:58:30Z

The pci_error_handlers->reset_notify() method had a flag to indicate whether to prepare for or clean up after a reset. The prepare and done cases have no shared functionality whatsoever, so split them into separate methods. [bhelgaas: changelog, update locking comments] Link: http://lkml.kernel.org/r/20170601111039.8913-3-hch@lst.de Signed-off-by: Christoph Hellwig Signed-off-by: Bjorn Helgaas

i40e: don't hold RTNL lock for the entire reset

2017-06-21T01:17:12Z

We recently refactored i40e_do_reset() and its friends to be able to hold the RTNL lock only for the portions that actually need to be protected. However, a separate refactoring added several new callers of these functions during the PCIe error recovery and suspend/resume cycles. When merging the changes together, it was not noticed that we could reduce the RTNL scope by letting the reset function handle the lock itself, as previously it was not possible. Fix this by replacing these call sites to indicate that the reset function should handle its own lock. This enables multiple PFs to reset or resume simultaneously without serializing the resets via the RTNL lock. The end result is that on systems with lots of PFs and VFs the resets don't stall waiting for each other to finish. It is probable that we can also do the same for i40e_do_reset_safe, but this author did not research that change carefully enough to be confident. Signed-off-by: Jacob Keller Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher

i40e: Handle PE_CRITERR properly with IWARP enabled

2017-06-21T01:17:12Z

When IWARP is enabled, we weren't clearing the PE_CRITERR, just logging it and removing it from the mask. We need to do a corer to reset the PE_CRITERR register, so set the bit for that as we handle the interrupt. We should also be checking for the error against the PFINT_ICR0 register, and only need to clear it in the value getting written to PFINT_ICR0_ENA. Signed-off-by: Catherine Sullivan Signed-off-by: Mitch Williams Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher

i40e: clear only cause_ena bit

2017-06-21T01:17:12Z

When disabling interrupts, we should only be clearing the CAUSE_ENA bit, not clearing the whole register. Clearing the whole register sets the NEXTQ_IDX field to 0 instead of 0x7ff which can confuse the Firmware in some reset sequences. Signed-off-by: Shannon Nelson Signed-off-by: Mitch Williams Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher

i40e: fix disabling overflow promiscuous mode

2017-06-21T01:17:11Z

There exists a bug in which the driver does not correctly exit overflow promiscuous mode. This can occur if "too many" mac filters are added, putting the driver into overflow promiscuous mode, and the filters are then removed. When the failed filters are removed, the driver reports exiting overflow promiscuous mode which is correct, however traffic continues to be received as if in promiscuous mode still. The bug occurs because the conditional for toggling promiscuous mode was set to only execute when promiscuous mode was enabled and not when it was disabled as well. This patch fixes the conditional to correctly execute when promiscuous mode is toggled and not just enabled. Without this patch, the driver is unable to correctly exit overflow promiscuous mode. Signed-off-by: Alan Brady Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher

i40e: Add support for OEM firmware version

2017-06-21T01:17:11Z

This patch adds support for OEM firmware version. If OEM specific adapter is detected ethtool reports OEM product version in firmware version string instead of etrack id. Signed-off-by: Filip Sadowski Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher

i40e: genericize the partition bandwidth control

2017-06-21T01:17:11Z

Partition bandwidth control is not in just one form of MFP (multi-function partitioning), so make the code more generic and be sure to nudge the Tx scheduler for all MFP. Copyright updated to 2017. Signed-off-by: Shannon Nelson Signed-off-by: Mitch Williams Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher