kernel.git/drivers/net/ethernet/intel/igb, branch linux-5.8.y

igb: reinit_locked() should be called with rtnl_lock

2020-07-30T17:05:14Z

We observed two panics involving races with igb_reset_task. The first panic is caused by this race condition: kworker reboot -f igb_reset_task igb_reinit_locked igb_down napi_synchronize __igb_shutdown igb_clear_interrupt_scheme igb_free_q_vectors igb_free_q_vector adapter->q_vector[v_idx] = NULL; napi_disable Panics trying to access adapter->q_vector[v_idx].napi_state The second panic (a divide error) is caused by this race: kworker reboot -f tx packet igb_reset_task __igb_shutdown rtnl_lock() ... igb_clear_interrupt_scheme igb_free_q_vectors adapter->num_tx_queues = 0 ... rtnl_unlock() rtnl_lock() igb_reinit_locked igb_down igb_up netif_tx_start_all_queues dev_hard_start_xmit igb_xmit_frame igb_tx_queue_mapping Panics on r_idx % adapter->num_tx_queues This commit applies to igb_reset_task the same changes that were applied to ixgbe in commit 2f90b8657ec9 ("ixgbe: this patch adds support for DCB to the kernel and ixgbe driver"), commit 8f4c5c9fb87a ("ixgbe: reinit_locked() should be called with rtnl_lock") and commit 88adce4ea8f9 ("ixgbe: fix possible race in reset subtask"). Signed-off-by: Francesco Ruggeri Tested-by: Aaron Brown Signed-off-by: Tony Nguyen

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2020-06-03T23:27:18Z

Pull networking updates from David Miller: 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz Augusto von Dentz. 2) Add GSO partial support to igc, from Sasha Neftin. 3) Several cleanups and improvements to r8169 from Heiner Kallweit. 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a device self-test. From Andrew Lunn. 5) Start moving away from custom driver versions, use the globally defined kernel version instead, from Leon Romanovsky. 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin. 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet. 8) Add sriov and vf support to hinic, from Luo bin. 9) Support Media Redundancy Protocol (MRP) in the bridging code, from Horatiu Vultur. 10) Support netmap in the nft_nat code, from Pablo Neira Ayuso. 11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina Dubroca. Also add ipv6 support for espintcp. 12) Lots of ReST conversions of the networking documentation, from Mauro Carvalho Chehab. 13) Support configuration of ethtool rxnfc flows in bcmgenet driver, from Doug Berger. 14) Allow to dump cgroup id and filter by it in inet_diag code, from Dmitry Yakunin. 15) Add infrastructure to export netlink attribute policies to userspace, from Johannes Berg. 16) Several optimizations to sch_fq scheduler, from Eric Dumazet. 17) Fallback to the default qdisc if qdisc init fails because otherwise a packet scheduler init failure will make a device inoperative. From Jesper Dangaard Brouer. 18) Several RISCV bpf jit optimizations, from Luke Nelson. 19) Correct the return type of the ->ndo_start_xmit() method in several drivers, it's netdev_tx_t but many drivers were using 'int'. From Yunjian Wang. 20) Add an ethtool interface for PHY master/slave config, from Oleksij Rempel. 21) Add BPF iterators, from Yonghang Song. 22) Add cable test infrastructure, including ethool interfaces, from Andrew Lunn. Marvell PHY driver is the first to support this facility. 23) Remove zero-length arrays all over, from Gustavo A. R. Silva. 24) Calculate and maintain an explicit frame size in XDP, from Jesper Dangaard Brouer. 25) Add CAP_BPF, from Alexei Starovoitov. 26) Support terse dumps in the packet scheduler, from Vlad Buslov. 27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei. 28) Add devm_register_netdev(), from Bartosz Golaszewski. 29) Minimize qdisc resets, from Cong Wang. 30) Get rid of kernel_getsockopt and kernel_setsockopt in order to eliminate set_fs/get_fs calls. From Christoph Hellwig. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits) selftests: net: ip_defrag: ignore EPERM net_failover: fixed rollback in net_failover_open() Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv" Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv" vmxnet3: allow rx flow hash ops only when rss is enabled hinic: add set_channels ethtool_ops support selftests/bpf: Add a default $(CXX) value tools/bpf: Don't use $(COMPILE.c) bpf, selftests: Use bpf_probe_read_kernel s390/bpf: Use bcr 0,%0 as tail call nop filler s390/bpf: Maintain 8-byte stack alignment selftests/bpf: Fix verifier test selftests/bpf: Fix sample_cnt shared between two threads bpf, selftests: Adapt cls_redirect to call csum_level helper bpf: Add csum_level helper for fixing up csum levels bpf: Fix up bpf_skb_adjust_room helper's skb csum setting sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf() crypto/chtls: IPv6 support for inline TLS Crypto/chcr: Fixes a coccinile check error Crypto/chcr: Fixes compilations warnings ...

igb: make igb_set_fc_watermarks() return void

2020-05-29T03:04:01Z

This function always return 0 now, we can make it return void to simplify the code. This fixes the following coccicheck warning: drivers/net/ethernet/intel/igb/e1000_mac.c:728:5-12: Unneeded variable: "ret_val". Return "0" on line 751 Signed-off-by: Jason Yan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher

igb: Report speed and duplex as unknown when device is runtime suspended

2020-05-23T01:21:52Z

igb device gets runtime suspended when there's no link partner. We can't get correct speed under that state: $ cat /sys/class/net/enp3s0/speed 1000 In addition to that, an error can also be spotted in dmesg: [ 385.991957] igb 0000:03:00.0 enp3s0: PCIe link lost Since device can only be runtime suspended when there's no link partner, we can skip reading register and let the following logic set speed and duplex with correct status. The more generic approach will be wrap get_link_ksettings() with begin() and complete() callbacks. However, for this particular issue, begin() calls igb_runtime_resume() , which tries to rtnl_lock() while the lock is already hold by upper ethtool layer. So let's take this approach until the igb_runtime_resume() no longer needs to hold rtnl_lock. CC: stable Suggested-by: Alexander Duyck Signed-off-by: Kai-Heng Feng Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher

PM: sleep: core: Rename DPM_FLAG_NEVER_SKIP

2020-04-24T19:33:09Z

Rename DPM_FLAG_NEVER_SKIP to DPM_FLAG_NO_DIRECT_COMPLETE which matches its purpose more closely. No functional impact. Suggested-by: Alan Stern Signed-off-by: Rafael J. Wysocki Acked-by: Bjorn Helgaas # for PCI parts Acked-by: Jeff Kirsher Acked-by: Alan Stern Acked-by: Bjorn Helgaas Acked-by: Alex Deucher

igb: convert to use i2c_new_client_device()

2020-03-27T02:31:21Z

Move away from the deprecated API and return the shiny new ERRPTR where useful. Signed-off-by: Wolfram Sang Signed-off-by: David S. Miller

net: igb: let core reject the unsupported coalescing parameters

2020-03-12T18:32:36Z

Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver was rejecting almost all unsupported parameters already, it was only missing a check for tx_max_coalesced_frames_irq. As a side effect of these changes the error code for unsupported params changes from ENOTSUPP to EOPNOTSUPP. Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller

intel: Replace zero-length array with flexible-array member

2020-02-24T23:26:17Z

The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva Signed-off-by: David S. Miller

Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net

2020-01-19T21:10:04Z

igb: Fix SGMII SFP module discovery for 100FX/LX.

2020-01-09T17:21:40Z

Changing the link mode should also be done for 100BaseFX SGMII modules, otherwise they just don't work when the default link mode in CTRL_EXT coming from the EEPROM is SERDES. Additionally 100Base-LX SGMII SFP modules are also supported now, which was not the case before. Tested with an i210 using Flexoptix S.1303.2M.G 100FX and S.1303.10.G 100LX SGMII SFP modules. Signed-off-by: Manfred Rudigier Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher