kernel.git/drivers/net/ethernet/intel/igb, branch linux-4.4.y

igb: Check if num of q_vectors is smaller than max before array access

2021-07-28T07:12:35Z

[ Upstream commit 6c19d772618fea40d9681f259368f284a330fd90 ] Ensure that the adapter->q_vector[MAX_Q_VECTORS] array isn't accessed beyond its size. It was fixed by using a local variable num_q_vectors as a limit for loop index, and ensure that num_q_vectors is not bigger than MAX_Q_VECTORS. Fixes: 047e0030f1e6 ("igb: add new data structure for handling interrupts and NAPI") Signed-off-by: Aleksandr Loktionov Reviewed-by: Grzegorz Siwik Reviewed-by: Arkadiusz Kubalewski Reviewed-by: Slawomir Laba Reviewed-by: Sylwester Dziedziuch Reviewed-by: Mateusz Palczewski Tested-by: Tony Brelinski Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin

igb: Remove incorrect "unexpected SYS WRAP" log message

2021-03-03T15:44:14Z

commit 2643e6e90210e16c978919617170089b7c2164f7 upstream. TSAUXC.DisableSystime is never set, so SYSTIM runs into a SYS WRAP every 1100 secs on 80580/i350/i354 (40 bit SYSTIM) and every 35000 secs on 80576 (45 bit SYSTIM). This wrap event sets the TSICR.SysWrap bit unconditionally. However, checking TSIM at interrupt time shows that this event does not actually cause the interrupt. Rather, it's just bycatch while the actual interrupt is caused by, for instance, TSICR.TXTS. The conclusion is that the SYS WRAP is actually expected, so the "unexpected SYS WRAP" message is entirely bogus and just helps to confuse users. Drop it. Signed-off-by: Corinna Vinschen Acked-by: Jacob Keller Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Cc: Punit Agrawal Signed-off-by: Greg Kroah-Hartman

igb: reinit_locked() should be called with rtnl_lock

2020-08-21T08:52:56Z

[ Upstream commit 024a8168b749db7a4aa40a5fbdfa04bf7e77c1c0 ] We observed two panics involving races with igb_reset_task. The first panic is caused by this race condition: kworker reboot -f igb_reset_task igb_reinit_locked igb_down napi_synchronize __igb_shutdown igb_clear_interrupt_scheme igb_free_q_vectors igb_free_q_vector adapter->q_vector[v_idx] = NULL; napi_disable Panics trying to access adapter->q_vector[v_idx].napi_state The second panic (a divide error) is caused by this race: kworker reboot -f tx packet igb_reset_task __igb_shutdown rtnl_lock() ... igb_clear_interrupt_scheme igb_free_q_vectors adapter->num_tx_queues = 0 ... rtnl_unlock() rtnl_lock() igb_reinit_locked igb_down igb_up netif_tx_start_all_queues dev_hard_start_xmit igb_xmit_frame igb_tx_queue_mapping Panics on r_idx % adapter->num_tx_queues This commit applies to igb_reset_task the same changes that were applied to ixgbe in commit 2f90b8657ec9 ("ixgbe: this patch adds support for DCB to the kernel and ixgbe driver"), commit 8f4c5c9fb87a ("ixgbe: reinit_locked() should be called with rtnl_lock") and commit 88adce4ea8f9 ("ixgbe: fix possible race in reset subtask"). Signed-off-by: Francesco Ruggeri Tested-by: Aaron Brown Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin

igb: Report speed and duplex as unknown when device is runtime suspended

2020-06-20T08:23:23Z

commit 165ae7a8feb53dc47fb041357e4b253bfc927cf9 upstream. igb device gets runtime suspended when there's no link partner. We can't get correct speed under that state: $ cat /sys/class/net/enp3s0/speed 1000 In addition to that, an error can also be spotted in dmesg: [ 385.991957] igb 0000:03:00.0 enp3s0: PCIe link lost Since device can only be runtime suspended when there's no link partner, we can skip reading register and let the following logic set speed and duplex with correct status. The more generic approach will be wrap get_link_ksettings() with begin() and complete() callbacks. However, for this particular issue, begin() calls igb_runtime_resume() , which tries to rtnl_lock() while the lock is already hold by upper ethtool layer. So let's take this approach until the igb_runtime_resume() no longer needs to hold rtnl_lock. CC: stable Suggested-by: Alexander Duyck Signed-off-by: Kai-Heng Feng Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: Greg Kroah-Hartman

igb: improve handling of disconnected adapters

2020-06-20T08:23:15Z

commit 7b06a6909555ffb0140733cc4420222604140b27 upstream. Clean up array_rd32 so that it uses igb_rd32 the same as rd32, per the suggestion of Alexander Duyck, and use io_addr in more places, so that we don't have the need to call E1000_REMOVED (which simply looks for a null hw_addr) nearly as much. Signed-off-by: Jarod Wilson Acked-by: Alexander Duyck Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Cc: Jeff Chase Signed-off-by: Greg Kroah-Hartman

igb: use igb_adapter->io_addr instead of e1000_hw->hw_addr

2020-05-27T14:40:23Z

commit 629823b872402451b42462414da08dddd0e2c93d upstream. When running as guest, under certain condition, it will oops as following. writel() in igb_configure_tx_ring() results in oops, because hw->hw_addr is NULL. While other register access won't oops kernel because they use wr32/rd32 which have a defense against NULL pointer. [ 141.225449] pcieport 0000:00:1c.0: AER: Multiple Uncorrected (Fatal) error received: id=0101 [ 141.225523] igb 0000:01:00.1: PCIe Bus Error: severity=Uncorrected (Fatal), type=Unaccessible, id=0101(Unregistered Agent ID) [ 141.299442] igb 0000:01:00.1: broadcast error_detected message [ 141.300539] igb 0000:01:00.0 enp1s0f0: PCIe link lost, device now detached [ 141.351019] igb 0000:01:00.1 enp1s0f1: PCIe link lost, device now detached [ 143.465904] pcieport 0000:00:1c.0: Root Port link has been reset [ 143.465994] igb 0000:01:00.1: broadcast slot_reset message [ 143.466039] igb 0000:01:00.0: enabling device (0000 -> 0002) [ 144.389078] igb 0000:01:00.1: enabling device (0000 -> 0002) [ 145.312078] igb 0000:01:00.1: broadcast resume message [ 145.322211] BUG: unable to handle kernel paging request at 0000000000003818 [ 145.361275] IP: [] igb_configure_tx_ring+0x14d/0x280 [igb] [ 145.400048] PGD 0 [ 145.438007] Oops: 0002 [#1] SMP A similar issue & solution could be found at: http://patchwork.ozlabs.org/patch/689592/ Signed-off-by: Cao jin Acked-by: Alexander Duyck Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Cc: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

igb: shorten maximum PHC timecounter update interval

2019-11-28T17:25:57Z

[ Upstream commit 094bf4d0e9657f6ea1ee3d7e07ce3970796949ce ] The timecounter needs to be updated at least once per ~550 seconds in order to avoid a 40-bit SYSTIM timestamp to be misinterpreted as an old timestamp. Since commit 500462a9d ("timers: Switch to a non-cascading wheel"), scheduling of delayed work seems to be less accurate and a requested delay of 540 seconds may actually be longer than 550 seconds. Shorten the delay to 480 seconds to be sure the timecounter is updated in time. This fixes an issue with HW timestamps on 82580/I350/I354 being off by ~1100 seconds for few seconds every ~9 minutes. Cc: Jacob Keller Cc: Richard Cochran Cc: Thomas Gleixner Signed-off-by: Miroslav Lichvar Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin

igb: Fix constant media auto sense switching when no cable is connected

2019-11-12T18:13:30Z

[ Upstream commit 8d5cfd7f76a2414e23c74bb8858af7540365d985 ] At least on the i350 there is an annoying behavior that is maybe also present on 82580 devices, but was probably not noticed yet as MAS is not widely used. If no cable is connected on both fiber/copper ports the media auto sense code will constantly swap between them as part of the watchdog task and produce many unnecessary kernel log messages. The swap code responsible for this behavior (switching to fiber) should not be executed if the current media type is copper and there is no signal detected on the fiber port. In this case we can safely wait until the AUTOSENSE_EN bit is cleared. Signed-off-by: Manfred Rudigier Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin

igb: Fix WARN_ONCE on runtime suspend

2019-05-16T17:45:01Z

[ Upstream commit dabb8338be533c18f50255cf39ff4f66d4dabdbe ] The runtime_suspend device callbacks are not supposed to save configuration state or change the power state. Commit fb29f76cc566 ("igb: Fix an issue that PME is not enabled during runtime suspend") changed the driver to not save configuration state during runtime suspend, however the driver callback still put the device into a low-power state. This causes a warning in the pci pm core and results in pci_pm_runtime_suspend not calling pci_save_state or pci_finish_runtime_suspend. Fix this by not changing the power state either, leaving that to pci pm core, and make the same change for suspend callback as well. Also move a couple of defines into the appropriate header file instead of inline in the .c file. Fixes: fb29f76cc566 ("igb: Fix an issue that PME is not enabled during runtime suspend") Signed-off-by: Arvind Sankar Reviewed-by: Kai-Heng Feng Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin

igb: Fix an issue that PME is not enabled during runtime suspend

2019-02-20T09:13:11Z

[ Upstream commit 1fb3a7a75e2efcc83ef21f2434069cddd6fae6f5 ] I210 ethernet card doesn't wakeup when a cable gets plugged. It's because its PME is not set. Since commit 42eca2302146 ("PCI: Don't touch card regs after runtime suspend D3"), if the PCI state is saved, pci_pm_runtime_suspend() stops calling pci_finish_runtime_suspend(), which enables the PCI PME. To fix the issue, let's not to save PCI states when it's runtime suspend, to let the PCI subsystem enables PME. Fixes: 42eca2302146 ("PCI: Don't touch card regs after runtime suspend D3") Signed-off-by: Kai-Heng Feng Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin