kernel.git/drivers/net/ethernet/intel/ice, branch master

drivers: net: ice: fix devlink parameters get without irdma

2026-03-10T16:08:31Z

If CONFIG_IRDMA isn't enabled but there are ice NICs in the system, the driver will prevent full devlink dev param show dump because its rdma get callbacks return ENODEV and stop the dump. For example: $ devlink dev param show pci/0000:82:00.0: name msix_vec_per_pf_max type generic values: cmode driverinit value 2 name msix_vec_per_pf_min type generic values: cmode driverinit value 2 kernel answers: No such device Returning EOPNOTSUPP allows the dump to continue so we can see all devices' devlink parameters. Fixes: c24a65b6a27c ("iidc/ice/irdma: Update IDC to support multiple consumers") Signed-off-by: Nikolay Aleksandrov Tested-by: Rinitha S (A Contingent worker at Intel) Signed-off-by: Tony Nguyen

ice: change XDP RxQ frag_size from DMA write length to xdp.frame_sz

2026-03-05T16:02:04Z

The only user of frag_size field in XDP RxQ info is bpf_xdp_frags_increase_tail(). It clearly expects whole buff size instead of DMA write size. Different assumptions in ice driver configuration lead to negative tailroom. This allows to trigger kernel panic, when using XDP_ADJUST_TAIL_GROW_MULTI_BUFF xskxceiver test and changing packet size to 6912 and the requested offset to a huge value, e.g. XSK_UMEM__MAX_FRAME_SIZE * 100. Due to other quirks of the ZC configuration in ice, panic is not observed in ZC mode, but tailroom growing still fails when it should not. Use fill queue buffer truesize instead of DMA write size in XDP RxQ info. Fix ZC mode too by using the new helper. Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side") Reviewed-by: Aleksandr Loktionov Signed-off-by: Larysa Zaremba Link: https://patch.msgid.link/20260305111253.2317394-5-larysa.zaremba@intel.com Signed-off-by: Jakub Kicinski

ice: fix rxq info registering in mbuf packets

2026-03-05T16:02:03Z

XDP RxQ info contains frag_size, which depends on the MTU. This makes the old way of registering RxQ info before calculating new buffer sizes invalid. Currently, it leads to frag_size being outdated, making it sometimes impossible to grow tailroom in a mbuf packet. E.g. fragments are actually 3K+, but frag size is still as if MTU was 1500. Always register new XDP RxQ info after reconfiguring memory pools. Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side") Reviewed-by: Aleksandr Loktionov Signed-off-by: Larysa Zaremba Link: https://patch.msgid.link/20260305111253.2317394-4-larysa.zaremba@intel.com Signed-off-by: Jakub Kicinski

ice: Fix memory leak in ice_set_ringparam()

2026-03-03T21:06:04Z

In ice_set_ringparam, tx_rings and xdp_rings are allocated before rx_rings. If the allocation of rx_rings fails, the code jumps to the done label leaking both tx_rings and xdp_rings. Furthermore, if the setup of an individual Rx ring fails during the loop, the code jumps to the free_tx label which releases tx_rings but leaks xdp_rings. Fix this by introducing a free_xdp label and updating the error paths to ensure both xdp_rings and tx_rings are properly freed if rx_rings allocation or setup fails. Compile tested only. Issue found using a prototype static analysis tool and code review. Fixes: fcea6f3da546 ("ice: Add stats and ethtool support") Fixes: efc2214b6047 ("ice: Add support for XDP") Signed-off-by: Zilin Guan Reviewed-by: Paul Menzel Reviewed-by: Aleksandr Loktionov Tested-by: Rinitha S (A Contingent worker at Intel) Signed-off-by: Tony Nguyen

ice: fix retry for AQ command 0x06EE

2026-03-03T21:06:04Z

Executing ethtool -m can fail reporting a netlink I/O error while firmware link management holds the i2c bus used to communicate with the module. According to Intel(R) Ethernet Controller E810 Datasheet Rev 2.8 [1] Section 3.3.10.4 Read/Write SFF EEPROM (0x06EE) request should to be retried upon receiving EBUSY from firmware. Commit e9c9692c8a81 ("ice: Reimplement module reads used by ethtool") implemented it only for part of ice_get_module_eeprom(), leaving all other calls to ice_aq_sff_eeprom() vulnerable to returning early on getting EBUSY without retrying. Remove the retry loop from ice_get_module_eeprom() and add Admin Queue (AQ) command with opcode 0x06EE to the list of commands that should be retried on receiving EBUSY from firmware. Cc: stable@vger.kernel.org Fixes: e9c9692c8a81 ("ice: Reimplement module reads used by ethtool") Signed-off-by: Jakub Staniszewski Co-developed-by: Dawid Osuchowski Signed-off-by: Dawid Osuchowski Reviewed-by: Aleksandr Loktionov Reviewed-by: Przemek Kitszel Link: https://www.intel.com/content/www/us/en/content-details/613875/intel-ethernet-controller-e810-datasheet.html [1] Reviewed-by: Paul Menzel Tested-by: Rinitha S (A Contingent worker at Intel) Signed-off-by: Tony Nguyen

ice: reintroduce retry mechanism for indirect AQ

2026-03-03T21:06:04Z

Add retry mechanism for indirect Admin Queue (AQ) commands. To do so we need to keep the command buffer. This technically reverts commit 43a630e37e25 ("ice: remove unused buffer copy code in ice_sq_send_cmd_retry()"), but combines it with a fix in the logic by using a kmemdup() call, making it more robust and less likely to break in the future due to programmer error. Cc: Michal Schmidt Cc: stable@vger.kernel.org Fixes: 3056df93f7a8 ("ice: Re-send some AQ commands, as result of EBUSY AQ error") Signed-off-by: Jakub Staniszewski Co-developed-by: Dawid Osuchowski Signed-off-by: Dawid Osuchowski Reviewed-by: Aleksandr Loktionov Reviewed-by: Przemek Kitszel Reviewed-by: Paul Menzel Tested-by: Rinitha S (A Contingent worker at Intel) Signed-off-by: Tony Nguyen

ice: fix adding AQ LLDP filter for VF

2026-03-03T21:06:04Z

The referenced commit came from a misunderstanding of the FW LLDP filter AQ (Admin Queue) command due to the error in the internal documentation. Contrary to the assumptions in the original commit, VFs can be added and deleted from this filter without any problems. Introduced dev_info message proved to be useful, so reverting the whole commit does not make sense. Without this fix, trusted VFs do not receive LLDP traffic, if there is an AQ LLDP filter on PF. When trusted VF attempts to add an LLDP multicast MAC address, the following message can be seen in dmesg on host: ice 0000:33:00.0: Failed to add Rx LLDP rule on VSI 20 error: -95 Revert checking VSI type when adding LLDP filter through AQ. Fixes: 4d5a1c4e6d49 ("ice: do not add LLDP-specific filter if not necessary") Reviewed-by: Aleksandr Loktionov Signed-off-by: Larysa Zaremba Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen

Merge branch '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue

2026-02-28T16:43:56Z

Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2026-02-19 (idpf, ice, i40e, ixgbevf, e1000e) For idpf: Li Li moves the check for software marker to occur after incrementing next to clean to avoid re-encountering the same packet. He also adds a couple of checks to prevent NULL pointer dereferences and NULLs rss_key, after free, in error path so that later checks are properly evaluated. Brian Vazquez adjusts IRQ naming to have correlation with netdev naming. Sreedevi removes validation of action type as part of ntuple rule deletion. For ice: Aaron Ma breaks RDMA initialization into two steps and adjusts calls so that VSIs are entirely configured before plugging. Michal Schmidt fixes initialization of loopback VSI to have proper resources allocated to allow for loopback testing to occur. For i40e: Thomas Gleixner fixes a leak of preempt count by replacing get_cpu() with smp_processor_id(). For ixgbevf: Jedrzej adds a check for mailbox version before attempting to call an associated link state call that is supported in that mailbox version. For e1000e: Vitaly clears power gating feature for Panther Lake systems to avoid packet issues. * '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: e1000e: clear DPG_EN after reset to avoid autonomous power-gating e1000e: introduce new board type for Panther Lake PCH ixgbevf: fix link setup issue i40e: Fix preempt count leak in napi poll tracepoint ice: fix crash in ethtool offline loopback test ice: recap the VSI and QoS info after rebuild idpf: Fix flow rule delete failure due to invalid validation idpf: change IRQ naming to match netdev and ethtool queue numbering idpf: nullify pointers after they are freed idpf: skip deallocating txq group's txqs if it is NULL idpf: skip deallocating bufq_sets from rx_qgrp if it is NULL idpf: increment completion queue next_to_clean in sw marker wait routine ==================== Link: https://patch.msgid.link/20260225211546.1949260-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski

ice: fix crash in ethtool offline loopback test

2026-02-25T19:43:57Z

Since the conversion of ice to page pool, the ethtool loopback test crashes: BUG: kernel NULL pointer dereference, address: 000000000000000c #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 1100f1067 P4D 0 Oops: Oops: 0002 [#1] SMP NOPTI CPU: 23 UID: 0 PID: 5904 Comm: ethtool Kdump: loaded Not tainted 6.19.0-0.rc7.260128g1f97d9dcf5364.49.eln154.x86_64 #1 PREEMPT(lazy) Hardware name: [...] RIP: 0010:ice_alloc_rx_bufs+0x1cd/0x310 [ice] Code: 83 6c 24 30 01 66 41 89 47 08 0f 84 c0 00 00 00 41 0f b7 dc 48 8b 44 24 18 48 c1 e3 04 41 bb 00 10 00 00 48 8d 2c 18 8b 04 24 <89> 45 0c 41 8b 4d 00 49 d3 e3 44 3b 5c 24 24 0f 83 ac fe ff ff 44 RSP: 0018:ff7894738aa1f768 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000700 RDI: 0000000000000000 RBP: 0000000000000000 R08: ff16dcae79880200 R09: 0000000000000019 R10: 0000000000000001 R11: 0000000000001000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ff16dcae6c670000 FS: 00007fcf428850c0(0000) GS:ff16dcb149710000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000000c CR3: 0000000121227005 CR4: 0000000000773ef0 PKRU: 55555554 Call Trace: ice_vsi_cfg_rxq+0xca/0x460 [ice] ice_vsi_cfg_rxqs+0x54/0x70 [ice] ice_loopback_test+0xa9/0x520 [ice] ice_self_test+0x1b9/0x280 [ice] ethtool_self_test+0xe5/0x200 __dev_ethtool+0x1106/0x1a90 dev_ethtool+0xbe/0x1a0 dev_ioctl+0x258/0x4c0 sock_do_ioctl+0xe3/0x130 __x64_sys_ioctl+0xb9/0x100 do_syscall_64+0x7c/0x700 entry_SYSCALL_64_after_hwframe+0x76/0x7e [...] It crashes because we have not initialized libeth for the rx ring. Fix it by treating ICE_VSI_LB VSIs slightly more like normal PF VSIs and letting them have a q_vector. It's just a dummy, because the loopback test does not use interrupts, but it contains a napi struct that can be passed to libeth_rx_fq_create() called from ice_vsi_cfg_rxq() -> ice_rxq_pp_create(). Fixes: 93f53db9f9dc ("ice: switch to Page Pool") Signed-off-by: Michal Schmidt Reviewed-by: Aleksandr Loktionov Tested-by: Rinitha S (A Contingent worker at Intel) Signed-off-by: Tony Nguyen

ice: recap the VSI and QoS info after rebuild

2026-02-25T19:43:57Z

Fix IRDMA hardware initialization timeout (-110) after resume by separating VSI-dependent configuration from RDMA resource allocation, ensuring VSI is rebuilt before IRDMA accesses it. After resume from suspend, IRDMA hardware initialization fails: ice: IRDMA hardware initialization FAILED init_state=4 status=-110 Separate RDMA initialization into two phases: 1. ice_init_rdma() - Allocate resources only (no VSI/QoS access, no plug) 2. ice_rdma_finalize_setup() - Assign VSI/QoS info and plug device This allows: - ice_init_rdma() to stay in ice_resume() (mirrors ice_deinit_rdma() in ice_suspend()) - VSI assignment deferred until after ice_vsi_rebuild() completes - QoS info updated after ice_dcb_rebuild() completes - Device plugged only when control queues, VSI, and DCB are all ready Fixes: bc69ad74867db ("ice: avoid IRQ collision to fix init failure on ACPI S3 resume") Reviewed-by: Aleksandr Loktionov Signed-off-by: Aaron Ma Reviewed-by: Simon Horman Signed-off-by: Tony Nguyen